AC Clamp Meter CM3289

(0) No Reviews yet
$164.00
SKU: CM3289
Ships in approximately 50 days if not in stock.

This item is IN STOCK

Production delay is expected due to the worldwide component shortages. Please contact a Hioki representative for details.

Hioki clamp meters are best-in-class measuring devices incorporating Hioki's expertise in current sensing technology. The CM3289 is a True RMS rectifying 1000A AC clamp meter that features a broad operating temperature range of -25 degrees Celsius to 65 degrees Celsius, thin and compact clamp core and optional flexible current sensor that you can attach to let you get into the tightest spots. 

CAT IV 300 V (Current) 
CAT III 600 V (Current) 
CAT III 300 V (Voltage) 
CAT II 600 V (Voltage) 

Key Features 
- The CM3289 is the successor to the popular 3280-20F with a redesigned thinner sensor to help you get into the tightest spaces 
- New redesigned sensor for even easier clamping 
- Expanded -25 degrees Celsius to 65 degrees Celsius operating temperature range 
- Measure even harmonic waveform components using the True RMS method 
- Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires 

Product Warranty Period: 3 years
AC Current range42.00 to 1000 A, 3 ranges
(40 Hz to 1 kHz, True RMS),
Basic accuracy: ±1.5 % rdg. ±5 dgt.
DC Voltage range420.0 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt.
AC Voltage range4.200 V to 600 V, 4 ranges
(45 to 500 Hz, True RMS),
Basic accuracy: ±1.8 % rdg. ±7 dgt.
Crest factor2.5 or less at 2500 counts
(Linearly decreases to 1.5 or less at 4200 count)
Resistance range420.0 Ω to 42.00 MΩ, 6 ranges, Basic accuracy: ±2 % rdg. ±4 dgt.
Other functionsContinuity: Buzzer sounds at 50 Ω ±40 Ω or less, Data hold, Auto power save, Drop-proof from height of 1 meter
DisplayLCD, max. 4199 dgt., Display refresh rate: 400 ms
Power supplyCoin type lithium battery (CR2032) ×1
Continuous use 70 hours
Core jaw dia.φ 33 mm (1.30 in)
Dimensions and mass57 mm (2.24 in) W × 181 mm (7.13 in) H × 16 mm (0.63 in) D, 100 g (3.5 oz)
AccessoriesCARRYING CASE 9398 × 1, TEST LEAD L9208 × 1, Coin type lithium battery (CR2032) × 1, Instruction manual × 1
ACCESSORIES



TEST LEAD L9208
70 cm (2.30 ft) length



Carrying case 9398
Carrying Case



Carrying Case C0205
Soft Case



CONTACT PIN SET L4933
Attaches to the tip of the Test Lead L9207-10/DT4911, L9206, 60V DC/ 30V AC



SMALL ALLIGATOR CLIP SET L4934
Attaches to the tip of the L4932, L9207-10/DT4911, L9206, CAT III 300 V, CAT II 600 V



TEST LEADS HOLDER 9209
Secures one end of each test lead to the rear of the meter




AC FLEXIBLE CURRENT SENSOR CT6280
- 4200 A AC Large current measurement 
- 130 mm (5.12"")
DOWNLOADS

Catalog
AC CLAMP METER CM3289

Manual
AC CLAMP METER CM3289

Declaration of Conformity
AC CLAMP METER CM3289

Ratings & Reviews

No reviews available

Be the first to Write a Review