AC/DC Clamp Meter (600A) CM4371
Hioki clamp meters are best-in-class measuring devices incorporating Hioki's expertise in current sensing technology. Model CM4371 is a 600A True RMS clamp meter that features stronger jaws, broader -25 degrees Celsius to 65 degrees Celsius operating temperature range and IP54 dustproof and waterproof enclosure to enable professionals to work quickly in tough situations including the development, repair, and maintenance of equipment and devices such as electric vehicles. Additionally, the high-voltage DC measurement capability of up to 1700 V is ideal for the clamp maintenance inspections of electrical and solar power equipment.
CAT IV 600 V
CAT III 1000 V
Key Features
- Multiple measurement functions
- Automatic AC/DC function helps boost work efficiency
- Measure DC voltages of up to 1700 V
- Simultaneously measure inrush current in RMS and crest values
- Expanded -25 degrees Celsius to 65 degrees Celsius operating temperature range IP54 dustproof and waterproof enclosure *Jaws (current sensor portion): IP50
Product Warranty Period: 3 years
Included Accessories:
TEST LEAD L9207-10, CARRYING CASE C0203, LR03 Alkaline battery ×2, Instruction Manual×1
CAT IV 600 V
CAT III 1000 V
Key Features
- Multiple measurement functions
- Automatic AC/DC function helps boost work efficiency
- Measure DC voltages of up to 1700 V
- Simultaneously measure inrush current in RMS and crest values
- Expanded -25 degrees Celsius to 65 degrees Celsius operating temperature range IP54 dustproof and waterproof enclosure *Jaws (current sensor portion): IP50
Product Warranty Period: 3 years
Included Accessories:
TEST LEAD L9207-10, CARRYING CASE C0203, LR03 Alkaline battery ×2, Instruction Manual×1
| DC Current range | 20.00 A/600.0 A, Basic accuracy: ±1.3% rdg. ±0.08 A (20 A range) |
|---|---|
| AC Current range | 20.00 A/600.0 A (10 Hz to 1 kHz, True RMS), Basic accuracy: ±1.3% rdg. ±0.08 A (at 20 A) |
| Crest factor | 20.00 A range: 7.5 600.0 A range: 3 or less |
| DC+AC Current range | 20.00 A/600.0 A (10 Hz to 1 kHz, True RMS), Basic accuracy DC, 45-66 Hz: ±1.3% rdg. ±0.13 A (at 20 A) |
| DC Voltage range | 600.0 mV to 1500 V (*1), 5 ranges, Basic accuracy: ±0.5% rdg. ±0.5 mV (at 600 mV) |
| AC Voltage range | 6.000 V to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS), Basic accuracy 45 - 66 Hz: ±0.9% rdg. ±0.013 V (at 6 V) |
| DC+AC Voltage range | 6.000 V to 1000 V, 4 ranges, Basic accuracy DC, 45 - 66 Hz: ±1.0% rdg. ±0.023 V (at 6 V) |
| Resistance range | 600.0 Ω to 600.0 kΩ, 4 ranges, Basic accuracy: ±0.7% rdg. ±0.5 Ω (at 600 Ω) |
| Capacitance range | 1.000 μF to 1000 μF, 4 ranges, Basic accuracy: ±1.9% rdg. ±0.005 μF (at 1 μF) |
| Frequency range | 9.999 Hz to 999.9 Hz, 3 ranges, Basic accuracy: ±0.1% rdg. ±0.003 Hz (at 9.999 Hz) |
| Temperature (K) | -40.0 to 400.0 ˚C, add temperature probe accuracy to basic accuracy of ±0.5% rdg. ±3.0 ˚C |
| Voltage detection | Hi: 40 V to 600 V AC, Lo: 80 V to 600 V AC, 50/60 Hz |
| Other functions | Automatic AC/DC detection, Plus/Minus judgement function of DC A, DC V, Max/Min/Average/PEAK MAX/ PEAK MIN value display, Filter function, Display value hold, Auto hold, Back light, Auto-power save, Buzzer sounds, Zero-adjustment |
| Dustproof, waterproof | Grip: IP54 (when measuring an insulated conductor only), Jaw (the current sensor portion of the instrument)/ barrier: IP50 *Risk of electric shock from the conductor being measured increases when wet. |
| Power supply | LR03 Alkaline battery ×2, Continuous use 45 hr (Backlight OFF) |
| Core jaw diameter | φ33 mm (1.30 in), Jaw dimension: 69 mm (2.72 in) W× 14 mm (0.55 in) D |
| Dimensions and mass | 65 mm (2.56 in) W × 215 mm (8.46 in) H × 35 mm (1.38 in) D mm, 340 g (12.0 oz) |
| Included Accessories | TEST LEAD L9207-10, CARRYING CASE C0203, LR03 Alkaline battery ×2, Instruction Manual×1 |
ACCESSORIES
CONTACT PIN SET L4933
- Attaches to the tip of the
Test Lead L9207-10
- DT4911, L9206, 60V DC/ 30V AC
SMALL ALLIGATOR CLIP SET L4934
- Attaches to the tip of the L4932, L9207-10/DT4911, L9206, CAT III 300 V, CAT II 600 V
TEST LEAD L9207-10
- 90 cm (2.95 ft) length
GRABBER CLIP 9243
- Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length
CONNECTION CABLE SET L4930
- 1.2 m (3.94 ft) length, CAT IV 600 V, CAT III 1000 V
EXTENSION CABLE SET L4931
- Expands the length of L4930/4940, 1.5 m (4.92 ft) length
TEST PIN SET L4932
- Attaches to the tip of the L4930/4940, CAT IV 600 V, CAT III 1000 V
SMALL ALLIGATOR CLIP SET L4934
- Attaches to the tip of the L4932, L9207-10/DT4911, L9206, CAT III 300 V, CAT II 600 V
ALLIGATOR CLIP SET L4935
- Attaches to the tip of the L4930/4940, CAT IV 600 V, CAT III 1000 V
BUS BAR CLIP SET L4936
- Attaches to the tip of the L4930/4940, CAT III 600 V
MAGNETIC ADAPTER SET L4937
- Attaches to the tip of the L4930/4940, CAT III 1000 V
TEST PIN SET L4938
- Attaches to the tip of the L4930/4940, CAT III 600 V
BREAKER PIN SET L4939
- Attaches to the tip of the L4930/4940, CAT III 600 V
THERMOCOUPLES(K) DT4910
- K type, tip exposed, 0.3 mm (0.01 in) diameter, 80 cm (2.62 ft) length, -40 to 260 °C (-40 to 500 °F), tolerance ±2.5 °C
Carrying Case C0203
- Carrying Case
CONTACT PIN SET L4933
- Attaches to the tip of the
Test Lead L9207-10
- DT4911, L9206, 60V DC/ 30V AC
SMALL ALLIGATOR CLIP SET L4934
- Attaches to the tip of the L4932, L9207-10/DT4911, L9206, CAT III 300 V, CAT II 600 V
TEST LEAD L9207-10
- 90 cm (2.95 ft) length
GRABBER CLIP 9243
- Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length
CONNECTION CABLE SET L4930
- 1.2 m (3.94 ft) length, CAT IV 600 V, CAT III 1000 V
EXTENSION CABLE SET L4931
- Expands the length of L4930/4940, 1.5 m (4.92 ft) length
TEST PIN SET L4932
- Attaches to the tip of the L4930/4940, CAT IV 600 V, CAT III 1000 V
SMALL ALLIGATOR CLIP SET L4934
- Attaches to the tip of the L4932, L9207-10/DT4911, L9206, CAT III 300 V, CAT II 600 V
ALLIGATOR CLIP SET L4935
- Attaches to the tip of the L4930/4940, CAT IV 600 V, CAT III 1000 V
BUS BAR CLIP SET L4936
- Attaches to the tip of the L4930/4940, CAT III 600 V
MAGNETIC ADAPTER SET L4937
- Attaches to the tip of the L4930/4940, CAT III 1000 V
TEST PIN SET L4938
- Attaches to the tip of the L4930/4940, CAT III 600 V
BREAKER PIN SET L4939
- Attaches to the tip of the L4930/4940, CAT III 600 V
THERMOCOUPLES(K) DT4910
- K type, tip exposed, 0.3 mm (0.01 in) diameter, 80 cm (2.62 ft) length, -40 to 260 °C (-40 to 500 °F), tolerance ±2.5 °C
Carrying Case C0203
- Carrying Case
DOWNLOADS
Catalog
- AC/DC CLAMP METER, AC CLAMP METER CM4000 series
Technical Notes
- CM4370 Series
Manual
- AC/DC CLAMP METER CM4371,CM4372,CM4373,CM4374
Declaration of Conformity
- AC/DC CLAMP METER CM4371,CM4372,CM4373,CM4374
Catalog
- AC/DC CLAMP METER, AC CLAMP METER CM4000 series
Technical Notes
- CM4370 Series
Manual
- AC/DC CLAMP METER CM4371,CM4372,CM4373,CM4374
Declaration of Conformity
- AC/DC CLAMP METER CM4371,CM4372,CM4373,CM4374