AC/DC CURRENT PROBE CT6843-05 (500kHz, 200A)

(0) No Reviews yet
$1,690.00
SKU: CT6843-05
Ships in approximately 20 days if not in stock.

Indent Basis Only

Production delay is expected due to the worldwide component shortages. Please contact a Hioki representative for details.


Hioki AC/DC clamp sensors are best-in-class current sensors for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT6843 is DC to 500 kHz/200 A sensors, ideal for capturing signals during the efficiency testing of batteries, inverters and power conditioners.


Key Features
- Ideal for use in environmental testing with broad -40 degrees C to 85 degrees C temperature range
- High precision with a clamp-type design, 0.3% amplitude accuracy, 0.1 degree phase accuracy
- Wide-bandwidth DC to 500 kHz (CT6843)
- Single-handed operation and robust locking mechanism
- Reduced effects from magnetic fields, conductor position, and noise from nearby wires
- For EV/HEV battery charge and discharge efficiency measurement and inverter and power conditioner conversion efficiency evaluation

Product Warranty Period: 3 years

Included Accessories:
Instruction manual ×1, Mark bands ×6, Carrying Case ×1
Rated current200 A AC/DC
Max. allowable input400 A rms (requires derating)
Frequency characteristicsAmplitude: DC to 500 kHz
Phase: DC to 300 kHz
Amplitude and phase accuracyDC ±0.3 % rdg. ±0.02 % f.s. (Phase: Not defined)
DC< f ≤ 100 Hz ±0.3 % rdg. ±0.01 % f.s. (Phase: ±0.1°) Defined to 500 kHz
Power consumption6 VA max. (at 200 A/55 Hz, ±12 V power requirement)
Output voltage0.1 V/A (CT6841), 0.01 V/A (CT6843)
(voltage output with the Sensor Unit, use with a device having a 1 MΩ input resistance or higher)
Core diameterφ 20 mm (0.79 in)
Operating temperature, humidity-40 °C to +85 °C (-40 °F to 185 °F), 80% rh or less (with no condensation)
Power supply±11 V to ±15 V DC (Power suppled via the Sensor Unit, which supports 100 to 240 V AC)
Dimensions and mass153 mm (6.02 in)W × 67 mm (2.64 in)H × 25 mm (0.98 in)D, 370 g (13.1 oz), cord length: 3 m (9.84 ft)
Included AccessoriesInstruction manual ×1, Mark bands ×6, Carrying Case ×1

Compatible models...CT6843 (-05)

Compatible modelsCT6843CT6843-05
Power Analyzer PW6001, PW3390△ (Requires CT9900)OK
Power Analyzer 3390OK△ (Requires CT9901)
Power HiTester 3193 seriesOK△ (Requires CT9901)
Current Unit 8971△ (Requires the 9318)△ (Requires the 9318, CT9901)
F/V Unit 8940△ (Requires the 9318, 9705)△ (Requires the 9318, 9705, CT9901)

ACCESSORIES



CONNECTION CORD 9165
- Cord has metallic BNC connectors at both ends, use at metallic terminal, 1.5 m (4.92 ft) length



CONNECTION CORD L9217
- Cord has insulated BNC connectors at both ends, 1.6 m (5.25 ft) length



SENSOR UNIT CT9555
- 1 channel
- Waveform output



SENSOR UNIT CT9556
- 1 channel, ±0.2% DC accuracy
- Waveform and RMS output



SENSOR UNIT CT9557
- 4 channels, ±0.06% DC accuracy
- Waveform, total waveform, and total RMS output



CONVERSION CABLE CT9900
- Convert PL23 (10-pin) terminal to ME15W (12-pin) terminal



EXTENSION CABLE CT9902
- 5 m (16.41 ft) length, ME15W (12 pin) - ME15W (12 pin) connector



CONVERSION CABLE CT9901
- ME15W (12 pin) to PL23 (10 pin) connector



CONVERSION CABLE 9318
- To connect the CT6841-6846, CT6865/63/62, 9709, 9272-10 to the 8971/40/51, 38 cm (14.96 in) length

OPTIONS


CT6843
- 200 A AC/DC, PL23 terminal

Ratings & Reviews

No reviews available

Be the first to Write a Review