AC/DC Current Sensor (1MHz, 50A) CT6862-05

(0) No Reviews yet
$1,000.00
SKU: CT6862-05
Ships in approximately 40 days if not in stock.

Contact for Lead Time

50 A AC/DC, ME15W terminal


Hioki pull-through AC/DC current sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT6862 is a DC to 1MHz/50A sensor, and this is ideal for capturing current signals from switching power supplies, inverters, power conditioners, etc.

CAT III 1000 V

Key Features
- Super high precision, 0.05% amplitude accuracy, 0.2degree phase accuracy
- Wide-bandwidth DC to 1 MHz (CT6862) excellent frequency characteristics
- Applications in the fields of electric and hybrid electric vehicles
- Wide operating temperature range fit for automobile applications
- Ideal for evaluation of solar power generation and fuel cells to measure battery charge and discharge and the secondary side of inverters
- For observing waveforms to be used with the oscilloscopes or Memory HiCorders (use with SENSOR UNIT)

Product Warranty Period: 3 years

Included Accessories:
Instruction manual ×1, Mark bands ×6
Rated current50 A AC/DC
Max. allowable input100 A rms (requires derating)
Frequency characteristicsAmplitude: DC to 1 MHz
Phase: DC to 300 kHz
Amplitude and Phase accuracyDC ±0.05 % rdg. ±0.01 % f.s. (Phase: Not defined)
16 Hz ≤ f ≤ 400 Hz ±0.05 % rdg. ±0.01 % f.s. (Phase: ±0.2°)
Defined to 1 MHz
Output voltage2 V /rated current value
(voltage output with the Sensor Unit, use with a device having a 1 MΩ input resistance or higher)
Max. rated voltage to earth1000 V AC/DC (50/60 Hz, CAT III )
Core diameterφ 24 mm (0.94 in)
Operating temperature, humidity-30°C to +85°C (-22°F to 185°F), 80% RH or less (with no condensation)
Power supply±11 V to ±15 V DC (Power suppled via the Sensor Unit, which supports 100 to 240 V AC)
Power consumption5 VA max. (at 50 A/55 Hz, ±12 V power requirement)
Dimensions and mass70 mm (2.76 in)W × 100 mm (3.94 in)H × 53 mm (2.09 in)D, 340 g (12.0 oz), cord length: 3 m (9.84 ft)
Included AccessoriesInstruction manual ×1, Mark bands ×6

Compatible models...CT6862 (-05)

Compatible modelsCT6862CT6862-05
Power Analyzer PW6001, PW3390△ (Requires CT9900)OK
Power Analyzer 3390OK△ (Requires CT9901)
Power HiTester 3193 seriesOK△ (Requires CT9901)
Current Unit 8971△ (Requires the 9318)△ (Requires the 9318, CT9901)
F/V Unit 8940N/AN/A

ACCESSORIES



CONNECTION CORD 9165
- Cord has metallic BNC connectors at both ends, use at metallic terminal, 1.5 m (4.92 ft) length



CONNECTION CORD L9217
- Cord has insulated BNC connectors at both ends, 1.6 m (5.25 ft) length



SENSOR UNIT CT9555
- 1 channel
- Waveform output



SENSOR UNIT CT9556
- 1 channel, ±0.2% DC accuracy
- Waveform and RMS output



SENSOR UNIT CT9557
- 4 channels, ±0.06% DC accuracy
- Waveform, total waveform, and total RMS output



CONVERSION CABLE CT9900
- Convert PL23 (10-pin) terminal to ME15W (12-pin) terminal



EXTENSION CABLE CT9902
- 5 m (16.41 ft) length, ME15W (12 pin) - ME15W (12 pin) connector



CONVERSION CABLE CT9901
- ME15W (12 pin) to PL23 (10 pin) connector



CONVERSION CABLE 9318
- To connect the CT6841-6846, CT6865/63/62, 9709, 9272-10 to the 8971/40/51, 38 cm (14.96 in) length

OPTIONS


CT6862
- 50 A AC/DC, PL23 terminal

Ratings & Reviews

No reviews available

Be the first to Write a Review