AC/DC Current Sensor (200A) CT6863
Hioki pull-through AC/DC current sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT6863 is a DC to 500kHz/200A sensor, and this is ideal for capturing current signals from switching power supplies, inverters, power conditioners, etc.
CAT III 1000 V
Key Features
- Super high precision, 0.05% amplitude accuracy, 0.2degree phase accuracy
- Applications in the fields of electric and hybrid electric vehicles
- Wide operating temperature range fit for automobile applications
- Ideal for evaluation of solar power generation and fuel cells to measure battery charge and discharge and the secondary side of inverters
- For observing waveforms to be used with the oscilloscopes or Memory HiCorders (use with SENSOR UNIT)
Product Warranty Period: 3 years
Included Accessories:
Instruction manual ×1, Mark bands ×6
CAT III 1000 V
Key Features
- Super high precision, 0.05% amplitude accuracy, 0.2degree phase accuracy
- Applications in the fields of electric and hybrid electric vehicles
- Wide operating temperature range fit for automobile applications
- Ideal for evaluation of solar power generation and fuel cells to measure battery charge and discharge and the secondary side of inverters
- For observing waveforms to be used with the oscilloscopes or Memory HiCorders (use with SENSOR UNIT)
Product Warranty Period: 3 years
Included Accessories:
Instruction manual ×1, Mark bands ×6
| Rated current | 200 A AC/DC |
|---|---|
| Max. allowable input | 400 A rms (requires derating) |
| Frequency characteristics | Amplitude: DC to 500 kHz Phase: DC to 300 kHz |
| Amplitude and Phase accuracy | DC ±0.05 % rdg. ±0.01 % f.s. (Phase: Not defined) 16 Hz ≤ f ≤ 400 Hz ±0.05 % rdg. ±0.01 % f.s. (Phase: ±0.2°) Defined to 500 kHz |
| Output voltage | 2 V /rated current value (voltage output with the Sensor Unit, use with a device having a 1 MΩ input resistance or higher) |
| Max. rated voltage to earth | 1000 V AC/DC (50/60 Hz, CAT III ) |
| Core diameter | φ 24 mm (0.94 in) |
| Operating temperature, humidity | -30°C to +85°C (-22°F to 185°F), 80% RH or less (with no condensation) |
| Power supply | ±11 V to ±15 V DC (Power suppled via the Sensor Unit, which supports 100 to 240 V AC) |
| Power consumption | 6 VA max. (at 200 A/55 Hz, ±12 V power requirement) |
| Dimensions and mass | 70 mm (2.76 in)W × 100 mm (3.94 in)H × 53 mm (2.09 in)D, 350 g (12.3 oz), cord length: 3 m (9.84 ft) |
| Included Accessories | Instruction manual ×1, Mark bands ×6 |
Compatible models...CT6863 (-05)
| Compatible models | CT6863 | CT6863-05 |
|---|---|---|
| Power Analyzer PW6001, PW3390 | △ (Requires CT9900) | OK |
| Power Analyzer 3390 | OK | △ (Requires CT9901) |
| Power HiTester 3193 series | OK | △ (Requires CT9901) |
| Current Unit 8971 | △ (Requires the 9318) | △ (Requires the 9318, CT9901) |
| F/V Unit 8940 | △ (Requires the 9318, 9705) | △ (Requires the 9318, 9705, CT9901) |
ACCESSORIES
CONNECTION CORD 9165
- Cord has metallic BNC connectors at both ends, use at metallic terminal, 1.5 m (4.92 ft) length
CONNECTION CORD L9217
- Cord has insulated BNC connectors at both ends, 1.6 m (5.25 ft) length
SENSOR UNIT CT9555
- 1 channel
- Waveform output
SENSOR UNIT CT9556
- 1 channel, ±0.2% DC accuracy
- Waveform and RMS output
SENSOR UNIT CT9557
- 4 channels, ±0.06% DC accuracy
- Waveform, total waveform, and total RMS output
CONVERSION CABLE CT9900
- Convert PL23 (10-pin) terminal to ME15W (12-pin) terminal
EXTENSION CABLE CT9902
- 5 m (16.41 ft) length, ME15W (12 pin) - ME15W (12 pin) connector
CONVERSION CABLE CT9901
- ME15W (12 pin) to PL23 (10 pin) connector
CONVERSION CABLE 9318
- To connect the CT6841-6846, CT6865/63/62, 9709, 9272-10 to the 8971/40/51, 38 cm (14.96 in) length
CONNECTION CORD 9165
- Cord has metallic BNC connectors at both ends, use at metallic terminal, 1.5 m (4.92 ft) length
CONNECTION CORD L9217
- Cord has insulated BNC connectors at both ends, 1.6 m (5.25 ft) length
SENSOR UNIT CT9555
- 1 channel
- Waveform output
SENSOR UNIT CT9556
- 1 channel, ±0.2% DC accuracy
- Waveform and RMS output
SENSOR UNIT CT9557
- 4 channels, ±0.06% DC accuracy
- Waveform, total waveform, and total RMS output
CONVERSION CABLE CT9900
- Convert PL23 (10-pin) terminal to ME15W (12-pin) terminal
EXTENSION CABLE CT9902
- 5 m (16.41 ft) length, ME15W (12 pin) - ME15W (12 pin) connector
CONVERSION CABLE CT9901
- ME15W (12 pin) to PL23 (10 pin) connector
CONVERSION CABLE 9318
- To connect the CT6841-6846, CT6865/63/62, 9709, 9272-10 to the 8971/40/51, 38 cm (14.96 in) length
DOWNLOADS
Catalog
- AC/DC CURRENT SENSOR CT6862, CT6863, 9709
Declaration of Conformity
- AC/DC CURRENT SENSOR CT6862,CT6862-05,CT6862-10,CT6863,CT6863-05,CT6863-10
Catalog
- AC/DC CURRENT SENSOR CT6862, CT6863, 9709
Declaration of Conformity
- AC/DC CURRENT SENSOR CT6862,CT6862-05,CT6862-10,CT6863,CT6863-05,CT6863-10