AC Flexible Current Sensor (For CM7290) CT7044

(0)No Reviews yet
$304.00
SKU: CT7044
Ships in approximately 17 days if not in stock.

Contact for Lead Time

Hioki clamp sensors are best-in-class measuring devices incorporating Hioki's expertise in current sensing technology. The CT7040 Series compromise of 600A,6000A AC flexible current sensors in three different loop sizes that pair with the detachable Display Unit to measure large currents in crowded wiring and confined spaces. 

 CAT IV 600 V, CAT III 1000 V 

 Key Features 
- 6000 A, 100 mm (3.94 in) 
- Thinner cables are easier to use in confined spaces and with complicated wiring 
- Supports large current measurements up to 6000 A 
- Wide 10 Hz to 50 kHz band with excellent frequency characteristics 
- Choose from three conductor diameter sizes 
- Ideal for site inspections by using detachable 
- Display Unit 
- Four output formats to output data to loggers or other devices (via Display Unit): WAVE, RMS, PEAK, Hz 

Product Warranty Period: 1 year

Included Accessories:
Instruction manual ×1

Basic specifications

CT7046CT7045CT7044
Rated measurement current6000 A AC
Internal Measurement range600A AC/ 6000A AC (Range is controlled by main device)
Max. allowable input10000 A continuous (at 6000 A range, 45 to 66 Hz, requires derating )
Bandwidth10 Hz to 50 kHz (±3dB)
(When used in combination with CM7290 or CM7291: 10 Hz to 1 kHz)
Amplitude and phase accuracy±1.5 % rdg. ±0.25 % f.s. (f.s. is internal range, 45 to 66 Hz) ±1 deg
Output rate1 mV/A (600 A*), 0.1 mV/A (6000 A)
*Selectable only when used with CM7290, CM7291, PQ3100
Max. rated voltage to earthAC 600 V (CAT IV), AC 1000 V (CAT III)
Loop diameterφ 254 mm (10.00 in) or lessφ 180 mm (7.09 in) or lessφ 100 mm (3.94 in) or less
Dust and water resistance *IP54 (when connected to a supported instrument, Do not make measurements when wet.)
Output connectorsHIOKI PL 14
Operating temperature range-25 °C to 65 °C (-13 °F to 149 °F)
DimensionsFlexible loop cable diameter: φ7.4 mm (0.29 in), Cable length: Between flexible loop and battery box: 2.3 m (7.55 ft), Output cable: 20 cm (0.66 ft), Battery box25 mm (0.98 in)W × 72 mm (2.83 in)H × 20 mm (0.79 in)D
Mass186 g (6.6 oz)174 g (6.1 oz)160 g (5.6 oz)
Included AccessoriesInstruction manual ×1

ACCESSORIES



DISPLAY UNIT CM7290
- Pair with CT7000 series
- DCA, ACA, (DC+AC) A, frequency
- WAVE, RMS, PEAK, Hz output



DISPLAY UNIT CM7291
- Bluetooth wireless technology
- Pair with CT7000 series
- DCA, ACA, (DC+AC) A, frequency
- WAVE, RMS, PEAK, Hz output



OUTPUT CORD L9094
- 3.5 mm (0.14 in) dia. mini plug to banana, 1.5 m (4.92 ft) length



OUTPUT CORD L9095
- Connect to BNC terminal, 1.5 m (4.92 ft) length



OUTPUT CORD L9096
- Connect to terminal block, 1.5 m (4.92 ft) length

OPTIONS


CT7046
- 6000 A, φ254 mm (10.00 in)


CT7045
- 6000 A, φ180 mm (7.09 in)

Ratings & Reviews

No reviews available

Be the first to Write a Review