BATTERY HiTESTER 3561-01 (with GP-IB)
Production delay is expected due to the worldwide component shortages. Please contact a Hioki representative for details.
Hioki benchtop battery testers support simultaneous high-speed measurement of internal resistance and battery voltage for the ever-expanding production lines of increasingly larger lithium-ion low resistance batteries, and other battery packs for high voltage applications. The 3561 is a wide range 300 milliohm to 3 milliohm/20V DC battery internal resistance tester for high-speed production line testing of small secondary batteries.
Key Features
- High-speed testing for production lines of small battery packs for mobile and portable communications devices
- Measure internal resistance and battery voltage
- For process control such as in high-speed automated assembly lines
Note: The comparison threshold values depend on the battery manufacturer, type, and capacity, and these must be established by the user
Product Warranty Period: 3 years
Included Accessories:
Instruction manual × 1, Power cord × 1
Max. applied measurement voltage | ±22 V DC ±60 V DC maximum rated voltage above ground |
---|---|
Resistance measurement ranges | 300 mΩ (max. display 310.00 mΩ, resolution 10 μΩ) to 3 Ω (max. display 3.1000 Ω, resolution 100 μΩ), 2 ranges Accuracy: ±0.5 % rdg. ±5 dgt. (Add ±3 dgt. for EX.FAST, or ±2 dgt. for FAST and MEDIUM) Testing source frequency: 1 kHz ±0.2 Hz, testing current: 10 mA (300 mΩ range), 1 mA (3 Ω range) Open terminal Voltage: 7 V peak |
Voltage measurement ranges | DC 20 V, resolution 0.1 mV, Accuracy: ±0.01 % rdg. ±3 dgt. (Add ±3 dgt. for EX.FAST, or ±2 dgt. for FAST and MEDIUM) |
Display | 31000 full digits (resistance), 199999 full digits (voltage), LED |
Sampling rate | Four steps, 4 ms (Extra-FAST), 12 ms (FAST), 35 ms (Medium), 150 ms (Slow) (Typ., sampling time depends on supply frequency settings and function.) |
Measurement time | Response time + sampling rate, approx. 3 ms for measurements (Response time depends on reference values and the measurement object.) |
Comparator functions | Judgment result: Hi/IN/Lo (resistance and voltage judged independently) Setting: Upper and lower limit, Deviation (%) from reference value Logical ANDed result: PASS/FAIL, calculates the logical AND of resistance and voltage judgment results. Result display, beeper, or external I/O output, Open-collector (35 V, 50 mA DC max.) |
Interfaces | External I/O, RS-232C, Printer (RS-232C), GP-IB (-01 suffix models only) |
Power supply | 100 to 240 V AC, 50/60 Hz, 30 VA max. |
Dimensions and mass | 215 mm (8.46 in) W × 80 mm (3.15 in) H × 295 mm (11.61 in) D, 2.4 kg (84.7 oz) |
Included Accessories | Instruction manual × 1, Power cord × 1 |
ACCESSORIES
About probe length
A: From junction to probe
B: Probe part
L: Whole length
- A: From junction to probe; B: Probe part; L: Whole length
- A: 260 mm (10.24 in.), B: 140 mm (5.51 in.), L: 850 mm (2.79 ft.)
- 60 V DC
- 1.8 mm dia. single-axis type for measuring small electrodes
- A: 260 mm (10.24 in.), B: 138 mm (5.43 in.), L: 850 mm (2.79 ft.)
- 60 V DC
- 0.2 mm parallel pyramid-type pins for measuring at thru holes and sub-millimeter objects
- A: 130 mm (5.12 in.), B:84 mm (3.31 in.), L:1.1 m (3.61 ft.) - 60 V DC
- A: 280 mm (11.02 in.), B: 118 mm (4.65 in.), L: 1360 mm (4.46 ft.)
- 60 V DC
- A: 300 mm (11.81 in.), B: 131 mm (5.16 in.), L: 1310 mm (4.30 ft.), tip φ 29 mm (1.14 in.), 50 V DC
- A:220 mm (8.66 in), B:197 mm (7.76 in), L:1360 mm (4.46 ft)
- A:260 mm (10.24 in), B:136 mm (5.35 in), L:890 mm (2.92 ft), Not CE marked.
Note: The 9455 is a precision instrument. Exercise appropriate care when handling it.
- 2 m (6.56 ft) length
- 9 pin - 9 pin, cross, 1.8 m (5.91 ft) length
DOWNLOADS
Catalog
- BATTERY HiTESTER BT3563, BT3562, 3561
Declaration of Conformity
- BATTERY HiTESTER 3561,3561-01