BATTERY HiTESTER BT3562-01 (GP-IB, Analog Output)

(0) No Reviews yet
$3,200.00
SKU: BT3562-01
Ships in approximately 20 days if not in stock.

Indent Basis Only

Production delay is expected due to the worldwide component shortages. Please contact a Hioki representative for details.


Hioki benchtop battery testers support simultaneous high-speed measurement of internal resistance and battery voltage for the ever-expanding production lines of increasingly larger lithium-ion low resistance batteries, and other battery packs for high voltage applications. The BT3562 can measure the voltage and resistance of coin-size to large-cell batteries up to 60V almost simultaneously due to their quick response time.


Key Features
- Measure high-voltage battery packs up to 60V (BT3562)
- Production line testing of high-voltage battery packs and battery modules
- Large (low-resistance) cell testing
- Choice of PC interfaces for full remote operation

Note: The comparison threshold values depend on the battery manufacturer, type, and capacity, and these must be established by the user.

Product Warranty Period: 3 years

Included Accessories:
Instruction manual ×1, Power cord ×1
Max. applied measurement voltage± 60 V DC rated input voltage
± 70 V DC Max. rated voltage to earth
Resistance measurement ranges3 mΩ (Max. display 3.1000 mΩ, resolution 0.1 μΩ) to 3000 Ω (Max. display 3100.0 Ω, resolution 100 mΩ), 7 ranges
Accuracy: 30 mΩ to 3000 Ω ranges, ± 0.5% rdg. ± 5 dgt. (Add ± 3 dgt. for EX.FAST, or ± 2 dgt. for FAST and MEDIUM)
3 mΩ range, ± 0.5% rdg. ± 10 dgt. (Add ± 30 dgt. for EX.FAST, or ± 10 dgt. for FAST, or ± 5 dgt. for MEDIUM)
Testing source frequency: 1 kHz ± 0.2 Hz, testing current: 100 mA (3 mΩ range) to 10 μA (3000 Ω range)
Open-circuit Voltage: 25 V peak (3/30 mΩ ranges), 7 V peak (300 mΩ range), 4 V peak (3 Ω to 3000 Ω ranges)
Voltage measurement ranges6 VDC (resolution 10 μV) to 60 VDC (resolution 100 μV), 2 ranges
Accuracy: ± 0.01% rdg. ± 3 dgt. (Add ± 3 dgt. for EX.FAST, or ± 2 dgt. for FAST and MEDIUM)
Display31000 full digits (resistance), 600000 full digits (voltage), LED
Sampling rateFour steps, 4 ms (Extra-FAST), 12 ms (FAST), 35 ms (Medium), 150 ms (Slow)
(Typ., sampling time depends on supply frequency settings and function.)
Measurement timeResponse time + sampling rate, approx. 10 ms for measurements
(Response time depends on reference values and the measurement object.)
Comparator functionsJudgment result: Hi/IN/Lo (resistance and voltage judged independently)
Setting: Upper and lower limit, Deviation (%) from reference value
Logical ANDed result: PASS/FAIL, calculates the logical AND of resistance and voltage judgment results.
Result display, beeper, or external I/O output, Open-collector (35 V, 50 mA DC max.)
Analog outputMeasured resistance (displayed value, from 0 to 3.1 V DC, -01 suffix models only)
InterfacesExternal I/O, RS-232C, Printer (RS-232C), GP-IB (-01 suffix models only)
Power supply100 to 240 VAC, 50/60 Hz, 30 VA max.
Dimensions and mass215 mm (8.46 in) W × 80 mm (3.15 in) H × 295 mm (11.61 in) D, 2.4 kg (84.7 oz)
AccessoriesInstruction manual ×1, Power cord ×1

ACCESSORIES

About probe length

A: From junction to probe

B: Probe part

L: Whole length



TIP PIN 9772-90
- To replace the tip on the Pin type lead 9772, L2100/L2110, (one piece)



PIN TYPE LEAD L2100
- A: 300 mm (11.81 in.), B: 172 mm (6.77 in.), L: 1400 mm (4.59 ft.), for high voltage battery measurements, 1000 V DC max.



PIN TYPE LEAD L2110
- A: 750 mm (29.53 in.), B: 215 mm (8.46 in.), L: 1880 mm (6.17 ft.), for high voltage battery measurements, 1000 V DC max.



PIN TYPE LEAD 9770
- A: 260 mm (10.24 in.), B: 140 mm (5.51 in.), L: 850 mm (2.79 ft.), 60 V DC



PIN TYPE LEAD 9771
- A: 260 mm (10.24 in.), B: 138 mm (5.43 in.), L: 850 mm (2.79 ft.), 60 V DC



CLIP TYPE LEAD L2107
- A: 130 mm (5.12 in.), B:84 mm (3.31 in.), L:1.1 m (3.61 ft.), 60 V DC



FOUR TERMINAL LEAD 9453
- A: 280 mm (11.02 in.), B: 118 mm (4.65 in.), L: 1360 mm (4.46 ft.), 60 V DC



LARGE CLIP TYPE LEAD 9467
- A: 300 mm (11.81 in.), B: 131 mm (5.16 in.), L: 1310 mm (4.30 ft.), tip φ 29 mm (1.14 in.), 50 V DC



0 ADJ BOARD Z5038
- For L2100, L2110, L2020, 9465-10, 9772



GP-IB CONNECTOR CABLE 9151-02
- 2 m (6.56 ft) length



RS-232C CABLE 9637
- 9 pin - 9 pin, cross, 1.8 m (5.91 ft) length



SWITCH MAINFRAME SW1001
- Pair with a measuring instrument for quick, multi-channel battery testing
- Max 60V DC input
- Max. 18 (4-terminal pair) to 66 (2-wire) channels



SWITCH MAINFRAME SW1002
- Pair with a measuring instrument for quick, multi-channel battery testing
- Max 60V DC input
- Max. 72 (4-terminal pair) to 264 (2-wire) channels

Ratings & Reviews

No reviews available

Be the first to Write a Review