Battery HiTester (GP-IB, Analog Output, 300V) BT3563-01

(0) No Reviews yet
$4,070.00
SKU: BT3563-01
Ships in approximately 70 days if not in stock.
Production delay is expected due to the worldwide component shortages. Please contact a Hioki representative for details.

Hioki benchtop battery testers support simultaneous high-speed measurement of internal resistance and battery voltage for the ever-expanding production lines of increasingly larger lithium-ion low resistance batteries, and other battery packs for high voltage applications. The BT3563 battery internal resistance tester can measure the voltage and resistance of battery modules, high voltage battery packs, fuel cell stacks and other large batteries up to 300V.

Key Features
- Measure high-voltage battery packs up to 300V (BT3563)
- Production line testing of high-voltage battery packs and battery modules
- Large (low-resistance) cell testing
- Choice of PC interfaces for full remote operation

Note: The comparison threshold values depend on the battery manufacturer, type, and capacity, and these must be established by the user.

Product Warranty Period: 3 years


Included Accessories:
Instruction manual ×1, Power cord ×1
Max. applied measurement voltage± 300 V DC rated input voltage
± 300 V DC Max. rated voltage to earth
Resistance measurement ranges3 mΩ (Max. display 3.1000 mΩ, resolution 0.1 μΩ) to 3000 Ω (Max. display 3100.0 Ω, resolution 100 mΩ), 7 ranges
Accuracy: 30 mΩ to 3000 Ω ranges, ± 0.5% rdg. ± 5 dgt. (Add ± 3 dgt. for EX.FAST, or ± 2 dgt. for FAST and MEDIUM)
3 mΩ range, ± 0.5% rdg. ± 10 dgt. (Add ± 30 dgt. for EX.FAST, or ± 10 dgt. for FAST, or ± 5 dgt. for MEDIUM)
Testing source frequency: 1 kHz ± 0.2 Hz, testing current: 100 mA (3 mΩ range) to 10 μA (3000 Ω range)
Open-circuit Voltage: 25 V peak (3/30 mΩ ranges), 7 V peak (300 mΩ range), 4 V peak (3 Ω to 3000 Ω ranges)
Voltage measurement ranges6 VDC (resolution 10 μV) to 300 VDC (resolution 1 mV), 3 ranges
Accuracy: ± 0.01% rdg. ± 3 dgt. (Add ± 3 dgt. for EX.FAST, or ± 2 dgt. for FAST and MEDIUM)
Display31000 full digits (resistance), 600000 full digits (voltage), LED
Sampling rateFour steps, 4 ms (Extra-FAST), 12 ms (FAST), 35 ms (Medium), 150 ms (Slow)
(Typ., sampling time depends on supply frequency settings and function.)
Measurement timeResponse time + sampling rate, approx. 10 ms for measurements
(Response time depends on reference values and the measurement object.)
Comparator functionsJudgment result: Hi/IN/Lo (resistance and voltage judged independently)
Setting: Upper and lower limit, Deviation (%) from reference value
Logical ANDed result: PASS/FAIL, calculates the logical AND of resistance and voltage judgment results.
Result display, beeper, or external I/O output, Open-collector (35 V, 50 mA DC max.)
Analog outputMeasured resistance (displayed value, from 0 to 3.1 V DC, -01 suffix models only)
InterfacesExternal I/O, RS-232C, Printer (RS-232C), GP-IB (-01 suffix models only)
Power supply100 to 240 VAC, 50/60 Hz, 30 VA max.
Dimensions and mass215 mm (8.46 in) W × 80 mm (3.15 in) H × 295 mm (11.61 in) D, 2.4 kg (84.7 oz)
Included AccessoriesInstruction manual ×1, Power cord ×1

ACCESSORIES


About probe length

A: From junction to probe

B: Probe part

L: Whole length



TIP PIN 9772-90
- To replace the tip on the Pin type lead 9772, L2100/L2110, (one piece)



PIN TYPE LEAD L2100
- A: 300 mm (11.81 in.), B: 172 mm (6.77 in.), L: 1400 mm (4.59 ft.), for high voltage battery measurements, 1000 V DC max.



PIN TYPE LEAD L2110
- A: 750 mm (29.53 in.), B: 215 mm (8.46 in.), L: 1880 mm (6.17 ft.), for high voltage battery measurements, 1000 V DC max.



PIN TYPE LEAD 9770
- A: 260 mm (10.24 in.), B: 140 mm (5.51 in.), L: 850 mm (2.79 ft.), 60 V DC



PIN TYPE LEAD 9771
- A: 260 mm (10.24 in.), B: 138 mm (5.43 in.), L: 850 mm (2.79 ft.), 60 V DC



CLIP TYPE LEAD L2107
- A: 130 mm (5.12 in.), B:84 mm (3.31 in.), L:1.1 m (3.61 ft.), 60 V DC



FOUR TERMINAL LEAD 9453
- A: 280 mm (11.02 in.), B: 118 mm (4.65 in.), L: 1360 mm (4.46 ft.), 60 V DC



LARGE CLIP TYPE LEAD 9467
- A: 300 mm (11.81 in.), B: 131 mm (5.16 in.), L: 1310 mm (4.30 ft.), tip φ 29 mm (1.14 in.), 50 V DC


0 ADJ BOARD Z5038
- For L2100, L2110, L2020, 9465-10, 9772



GP-IB CONNECTOR CABLE 9151-02
- 2 m (6.56 ft) length



RS-232C CABLE 9637
- 9 pin - 9 pin, cross, 1.8 m (5.91 ft) length

Ratings & Reviews

No reviews available

Be the first to Write a Review