Battery HiTester (1000V) BT3564

(0) No Reviews yet
$5,500.00
SKU: BT3564
Ships in approximately 70 days if not in stock.
Production delay is expected due to the worldwide component shortages. Please contact a Hioki representative for details.

Hioki benchtop battery testers support simultaneous high-speed measurement of the internal resistance and battery voltage of EV and PHEV battery packs. The BT3564 Battery HiTester can measure pack voltage and total resistance, as well as bus bar resistance up to 1000V.


Key Features
- Measure high-voltage battery packs up to 1000V
- Production line testing of high-voltage battery packs for EV, PHEV
- 0.1 microohm to 3000 ohm internal resistance range (pack total resistance, bus bar resistance)
- Spark discharge reduction function
- Analog output function
- Optional measurement probe available for 1000 V and high-voltage battery packs

Product Warranty Period: 3 years

Included Accessories:
Instruction manual ×1, Power cord ×1 , Operating Precautions ×1

Max. applied measurement voltage± 1000 VDC rated input voltage
± 1000 VDC max. rated voltage to earth
Resistance measurement ranges3 mΩ (max. display 3.1000 mΩ, resolution 0.1 μΩ) to 3 kΩ (max. display 3.1000 kΩ, resolution 0.1 Ω), 7 ranges
Accuracy: ±0.5 % rdg. ±5 dgt. (30 mΩ to 3 kΩ range), ±0.5 % rdg. ±10 dgt. (3 mΩ range)
Testing source frequency: 1 kHz ±0.2 Hz, testing current: 100 mA (3 mΩ range) to 10 μA (3.000 kΩ range)
Open terminal Voltage: 25 V peak (3/30 mΩ ranges), 7 V peak (300 mΩ range), 4 V peak (3 Ω to 3.000 kΩ range)
Voltage measurement ranges10 V DC (resolution: 10 µV) to 1000V DC (resolution: 1 m V), 3 ranges
Accuracy: ±0.01 % rdg. ±3 dgt.
Display31000 full digits (resistance), 999999 full digits (voltage, 1000 V range: 999999 or 110000), LED
Sampling timeFAST: 12 ms, MEDIUM: 35 ms, SLOW: 253 ms
(Typ., sampling time depends on supply frequency settings and function.)
Total measurement timeResponse time + sampling time (Response time for both resistance and voltage are reference value of about 700 ms, depends on measurement object.)
Comparator functionsJudgment result: Hi/IN/Lo (resistance and voltage judged independently)
Setting: Upper and lower limit, Deviation (%) from reference value
Logical ANDed result: PASS/FAIL, calculates the logical AND of resistance and voltage judgment results.
Result display, beeper, or external I/O output (open-collector, 35 V, 50 mA DC max.)
Analog outputMeasured resistance (displayed value, from 0 to 3.1 V DC)
InterfacesExternal I/O, RS-232C, Printer (RS-232C), GP-IB
Power supply100 to 240 V AC, 50/60 Hz, 30 VA max.
Dimensions and mass215 mm (8.46 in) W × 80 mm (3.29 in) H × 295 mm (12.95 in) D, 2.4 kg (84.7 oz)
AccessoriesInstruction manual ×1, Power cord ×1 , Operating Precautions ×1

ACCESSORIES



PIN TYPE LEAD L2110
- A: 750 mm (29.53 in.), B: 215 mm (8.46 in.), L: 1880 mm (6.17 ft.), for high voltage battery measurements, 1000 V DC max.



TIP PIN 9772-90
- To replace the tip on the Pin type lead 9772, L2100/L2110, (one piece)



PIN TYPE LEAD L2100
- A: 300 mm (11.81 in.), B: 172 mm (6.77 in.), L: 1400 mm (4.59 ft.), for high voltage battery measurements, 1000 V DC max.



0 ADJ BOARD Z5038
- For L2100, L2110, L2020, 9465-10, 9772



PIN TYPE LEAD 9770
- A: 260 mm (10.24 in.), B: 140 mm (5.51 in.), L: 850 mm (2.79 ft.), 60 V DC



PIN TYPE LEAD 9771
- A: 260 mm (10.24 in.), B: 138 mm (5.43 in.), L: 850 mm (2.79 ft.), 60 V DC



CLIP TYPE LEAD L2107
- A: 130 mm (5.12 in.), B:84 mm (3.31 in.), L:1.1 m (3.61 ft.), 60 V DC



FOUR TERMINAL LEAD 9453
- A: 280 mm (11.02 in.), B: 118 mm (4.65 in.), L: 1360 mm (4.46 ft.), 60 V DC



LARGE CLIP TYPE LEAD 9467
- A: 300 mm (11.81 in.), B: 131 mm (5.16 in.), L: 1310 mm (4.30 ft.), tip φ 29 mm (1.14 in.), 50 V DC



RS-232C CABLE 9637
- 9 pin - 9 pin, cross, 1.8 m (5.91 ft) length



GP-IB CONNECTOR CABLE 9151-02
- 2 m (6.56 ft) length

Ratings & Reviews

No reviews available

Be the first to Write a Review