BATTERY IMPEDANCE METER BT4560

(0) No Reviews yet
$5,500.00
SKU: BT4560
Ships in approximately 20 days if not in stock.

Indent Basis Only

Production delay is expected due to the worldwide component shortages. Please contact a Hioki representative for details.

Hioki benchtop battery testers support simultaneous high-speed measurement in the ever-expanding production lines of increasingly larger lithium-ion low resistance batteries. The BT4560 battery impedance tester measures the impedance of lithium-ion batteries using the low-frequency AC-IR measurement method without charging and discharging the battery, substantially reducing the time needed to inspect the internal resistance of battery cells.


Key Features
- Low-frequency AC-IR measurement* : Measure the reaction resistance of a battery
*The BT4560 ensures battery cell quality by measuring internal impedance at a low frequency of 1 Hz or below
- Extremely reliable measurements for low-impedance batteries
*The BT4560 uses a testing current of 1.5 A at the 3 milliohm range, which improves the S/N ratio
- Circuit configuration highly tolerant of contact and wire resistance to provide stable measurements
- Voltage measurement function equivalent to 6-digit DMM 0.0035% rdg.

Product Warranty Period: 3 years

Included Accessories:
Power cord ×1, Instruction manual ×1, Zero-adjustment board ×1, USB cable (A-B type) ×1, CD-R (communication instruction manual, PC application software, USB driver) ×1
Allowable input voltageUp to 5 V
Measured informationImpedance, voltage, temperature
Impedance measurementParameters: R, X, Z, θ, Frequency: 0.1 Hz to 1050 Hz, Measurement ranges: 3.0000 mΩ, 10.0000 mΩ, 100.000 mΩ
Testing current: 3 mΩ range: 1.5 Arms, 10 mΩ range: 500 mArms, 100 mΩ range: 50 mArms
Voltage measurementMeasurement range: 5.00000 V (single range), Measurement time: 0.1 s (Fast) to 1.0 s (Slow)
Temperature measurementRange: -10.0 °C to 60.0 °C, Measurement time: 2.3 s
Basic accuracyZ: ±0.4% rdg. θ: ±0.1 °, V: ±0.0035% rdg. ±5 dgt. , Temperature: ±0.5 °C (at 10.0 to 40.0 °C)
FunctionsComparator, self-calibration, sample delay, average, contact check, measurement current error, and other
InterfacesRS-232C/USB (virtual COM port) * Cannot be used simultaneously
EXT. I/O (NPN/PNP can be switched)
Power supply100 to 240 V AC, 50/60 Hz, 80 VA max
Dimensions and mass330 mm (12.99 in) W × 80 mm (3.15 in) H × 293 mm (11.54 in) D, 3.7 kg (130.5 oz)
AccessoriesPower cord ×1, Instruction manual ×1, Zero-adjustment board ×1, USB cable (A-B type) ×1, CD-R (communication instruction manual, PC application software, USB driver) ×1

ACCESSORIES



CLIP TYPE PROBE L2002
- Cable length 1.5 m (4.92 ft) length



PIN TYPE PROBE L2003
- Cable length 1.5 m (4.92 ft) length



TEMPERATURE SENSOR Z2005
- Cable length 1 m (3.28 ft) length



RS-232C CABLE 9637
- 9 pin - 9 pin, cross, 1.8 m (5.91 ft) length



SWITCH MAINFRAME SW1001
- Pair with a measuring instrument for quick, multi-channel battery testing
- Max 60V DC input
- Max. 18 (4-terminal pair) to 66 (2-wire) channels



SWITCH MAINFRAME SW1002
- Pair with a measuring instrument for quick, multi-channel battery testing
- Max 60V DC input
- Max. 72 (4-terminal pair) to 264 (2-wire) channels

DOWLOADS

Catalog
BATTERY IMPEDANCE METER BT4560

Declaration of Conformity
BATTERY IMPEDANCE METER BT4560

Ratings & Reviews

No reviews available

Be the first to Write a Review