Battery Tester (60V) BT3561A

(0) No Reviews yet
$2,613.00
SKU: BT3561A
Ships in approximately 70 days if not in stock.

Out of stock, coming soon!

Production delay is expected due to the worldwide component shortages. Please contact a Hioki representative for details.

Hioki benchtop battery testers support simultaneous high-speed measurement of internal resistance and battery voltage for the ever-expanding production lines of increasingly larger lithium-ion low resistance batteries, and other battery packs for high voltage applications. The 3561A is a wide range 30 mΩ to 3Ω/60V DC battery internal resistance tester for high-speed production line testing of small secondary batteries.

Key Features
- High-speed testing for production lines of small battery packs for mobile and portable communications devices
- Measure internal resistance and battery voltage
- For process control such as in high-speed automated assembly lines

Note: The comparison threshold values depend on the battery manufacturer, type, and capacity, and these must be established by the user
Resistance measurement ranges30 mΩ(Max. display: 31.000 mΩ, resolution: 1 μΩ, measurement current: 100 mA)
300 mΩ(Max. display: 310.00 mΩ, resolution: 10 μΩ, measurement current: 10 mA)
3 Ω(Max. display: 3.1000 Ω, resolution: 100 μΩ, measurement current: 1 mA)
30 Ω(Max. display: 31.000 Ω, resolution: 1 mΩ, measurement current: 100 μA)
300 Ω(Max. display: 310.00 Ω, resolution: 10 mΩ, measurement current: 10 μA)
3 kΩ(Max. display: 3.1000 kΩ, resolution: 100 mΩ, measurement current: 10 μA)

Basic accuracy: ±0.5% rdg ±5 dgt(30 mΩ range or more)
Measurement frequency: 1 kHz ±0.2 Hz
Measurement method: AC four-terminal method
Voltage measurement ranges6 V(Max. display: 6.00000 V, resolution: 10 μV)
60 V(Max. display: 60.0000 V, resolution: 100 μV)

Basic accuracy: ±0.01% rdg. ±3 dgt.
Response time10 ms
Sampling periodΩ or V (60 Hz): 4 ms (EX.FAST), 12 ms (FAST), 35 ms (MEDIUM), 150 ms (SLOW)
ΩV (60 Hz): 8 ms (EX.FAST), 24 ms (FAST), 70 ms (MEDIUM), 253 ms (SLOW)

Ω or V (50 Hz): 4 ms (EX.FAST), 12 ms (FAST), 42 ms (MEDIUM), 157 ms (SLOW)
ΩV (50 Hz): 8 ms (EX.FAST), 24 ms (FAST), 84 ms (MEDIUM), 259 ms (SLOW)
FunctionsContact check, Zero adjustment (±1000 counts), Pulse measurement, Comparator (Hi/ IN/ Lo), Statistical calculations (Max. 30,000), Delay, Average, Panel saving/loading, Memory storage, LabVIEW® driver
InterfacesLAN (TCP/IP, 10BASE-T/100BASE-TX)
RS-232C (Max. 38.4 kbps, Available as printer I/F)
EXT I/O (37-pin Handler interface)
Analog output (DC 0 V to 3.1 V)
Power supply100 to 240 V AC, 50 Hz/60 Hz, 35 VA max.
Dimensions and mass215 mm (8.46 in) W × 80 mm (3.15 in) H × 295 mm (11.61 in) D, 2.4 kg (84.7 oz)
ACCESSORIES

TIP PIN 9772-90
- To replace the tip on the Pin type lead 9772, L2100/L2110, (one piece)

PIN TYPE LEAD L2100
- A: 300 mm (11.81 in.), B: 172 mm (6.77 in.), L: 1400 mm (4.59 ft.), for high voltage battery measurements, 1000 V DC max.

LARGE CLIP TYPE LEAD 9467
- A: 300 mm (11.81 in.), B: 116 mm (4.57 in.), L: 1360 mm (53.54 in.), tip φ 29 mm (1.14 in.), 50 V DC

Ratings & Reviews

No reviews available

Be the first to Write a Review