C HiTESTER 3504-40
Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components. The 3504 series are dual-band capacitance meters suited for large-capacitance MLCC inspections using a constant voltage.
Key Features
- High speed measurement of 2ms
- Supports C measurements with voltage dependency characteristics through the use of constant voltage testing (CV)
- Model 3504-60 can detect contact failure on all 4 terminals for increased reliability
- BIN function on the 3504-60/-50 is ideal for sorting machines
- Model 3504-40 offers high speed and affordability, perfect for integrating into taping machines
- In all models, contact error is constantly monitored during measurement, contributing to increased yield
Product Warranty Period: 3 years
Included Accessories:
Power cord ×1, Instruction manual ×1, Spare fuse ×1
Measurement parameters | C (capacitance), D (loss coefficient tan δ) |
---|---|
Measurement range | C: 0.9400 pF to 20.0000 mF, D: 0.00001 to 1.99999 |
Basic accuracy | (Typ.) C: ±0.09 % rdg. ±10 dgt., D: ±0.0016 |
Measurement frequency | 120 Hz, 1 kHz |
Measurement signal level | 100 mV (3504-60 only), 500 mV, 1 V rms CV 100 mV Measurement range: up to 170 μF range (Source frequency 1 kHz), up to 1.45 mF range (Source frequency 120 Hz) CV 500 mV Measurement range : up to 170 μF range (Source frequency 1 kHz), up to 1.45 mF range (Source frequency 120 Hz) CV 1V Measurement range : up to 70 μF range (Source frequency 1 kHz), up to 700 μF range (Source frequency 120 Hz) |
Output impedance | 5Ω (In open terminal voltage mode outside of the CV measurement range) |
Display | LED (six digits, full scale count depends on measurement range) |
Measurement time | 2 ms (Typ. value. Depends on measurement configuration settings) |
Functions | 4-terminal contact check function (3504-60 only) BIN (measurement values can be classified by rank) (3504-50, 3504-60), Trigger-synchronous output, Setting configurations can be stored, Comparator, Averaging, Low-C reject (bad contact detection), Chatter detection, EXT. I/O, RS-232C, GP-IB (3504-50, 3504-60) |
Power supply | Selectable from 100, 120, 220 or 240 V AC ±10 %, 50/60 Hz, 110 VA max. |
Dimensions and mass | 260 mm (10.24 in) W × 100 mm (3.94 in) H × 220 mm (8.66 in) D, 3.8 kg(134.0 oz) |
Included Accessories | Power cord ×1, Instruction manual ×1, Spare fuse ×1 |
ACCESSORIES
4-TERMINAL PROBE 9140
- DC to 100 kHz, 1 m (3.28 ft) length, impedance characteristics of 75 Ω
TEST FIXTURE 9261
- DC to 8 MHz, 1 m (3.28 ft) length, impedance characteristics of 75 Ω
TEST FIXTURE 9262
- Direct connection type, DC to 8 MHz, measurable conductor diameter: ø0.3 (0.01 in) to 2 mm (0.08 in)
SMD TEST FIXTURE 9263
- Direct connection type, DC to 8 MHz, Test sample dimensions:1 mm (0.04 in) to 10 mm (0.39 in)
SMD TEST FIXTURE 9677
- Direct connection type, For measuring SMDs with electrodes on the side; DC to 120 MHz, test sample dimensions: 3.5 mm ±0.5 mm (0.14 in ±0.02 in)
SMD TEST FIXTURE 9699
- Direct connection type, For measuring SMDs with electrodes on the bottom; DC to 120 MHz, test sample dimensions: 1.0 mm (0.04 in) to 4.0 mm (0.16 in) wide, max. 1.5 mm (0.06 in) high
CONTACT TIPS IM9901
- To replace the tip on the L2001, regular size, bundled with the L2001
CONTACT TIPS IM9902
- To replace the tip on the L2001, small size
PINCHER PROBE L2001
- DC to 8MHz, 50Ω termination
- Tip electrode spacing: 0.3 to 6 mm
- Measurable sample size: 0603 (EIA)
- PC communication
GP-IB CONNECTOR CABLE 9151-02
- 2 m (6.56 ft) length
PRINTER 9442
- For printing numerical values 112 mm (4.41 in) paper width, not CE marked
CONNECTION CABLE 9444
- 9 pin - 9 pin straight, 1.5 m (4.92 ft) length
RECORDING PAPER 1196
- 112 mm (4.41 in) × 25 m (82.03 ft), 10 rolls/set
DOWNLOADS
Catalog
- C METER 3506-10, C HiTESTER 3504
Declaration of Conformity
- C HiTESTER 3504-40,3504-50,3504-60