C Meter (1kHz, 1MHz, Low Noise) 3506-10

(0) No Reviews yet
$5,390.00
SKU: 3506-10
Ships in approximately 35 days if not in stock.

Contact for Lead Time

Production delay is expected due to the worldwide component shortages. Please contact a Hioki representative for details.

Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components. The 3506-10 is a dual-band capacitance meter designed to be integrated with automatic taping machines and sorters for production of MLCC (multi-layer ceramic capacitors).

Key Features
- High-speed analog test time of 0.6 ms (at 1 MHz)
- Improved noise resistance and enhanced repeatability in measurement precision even for production lines
- 1 kHz and 1 MHz measurement frequency supports stable low capacitance testing with taping machines
- BIN function, for easy component screening

Product Warranty Period: 3 years

Included Accessories:
Power cord × 1, Instruction manual × 1, Spare fuse × 1
Measurement parametersC (Capacitance), D (loss coefficient, tan δ), Q (1/tan δ)
Measurement rangeC: 0.001 fF to 15.0000 μF, D: 0.00001 to 1.99999, Q: 0.0 to 19999.9
Basic accuracy(Typ.) C: ±0.14 % rdg., D: ±0.0013
Measurement frequency1 kHz, 1 MHz
Measurement signal level500 mV, 1 V rms
Output impedance1 Ω (at 1 kHz in 2.2 μF and higher ranges), 20 Ω (in ranges other than the above)
DisplayLED (six digits, full scale count depends on measurement range)
Measurement time1.5 ms: 1 MHz, 2.0 ms: 1 kHz (Typ. value. Depends on measurement configuration settings)
FunctionsBIN (measurement values can be classified by rank), Trigger-synchronous output, Setting configurations can be stored, Comparator, Averaging, Low-C reject (bad contact detection), Chatter detection, Current detection circuit monitoring, Applied voltage value monitoring, EXT. I/O, RS-232C, GP-IB
Power supplySelectable from 100, 120, 220 or 240 V AC ±10 %, 50/60 Hz 40 VA max.
Dimensions and mass260 mm (10.24 in) W × 100 mm (3.94 in) H × 298 mm (11.73 in) D, 4.8 kg (169.3 oz)
Included AccessoriesPower cord × 1, Instruction manual × 1, Spare fuse × 1

ACCESSORIES



4-TERMINAL PROBE 9140
- DC to 100 kHz, 1 m (3.28 ft) length, impedance characteristics of 75 Ω



TEST FIXTURE 9261
- DC to 8 MHz, 1 m (3.28 ft) length, impedance characteristics of 75 Ω



TEST FIXTURE 9262
- Direct connection type, DC to 8 MHz, measurable conductor diameter: ø0.3 (0.01 in) to 2 mm (0.08 in)



SMD TEST FIXTURE 9263
- Direct connection type, DC to 8 MHz, Test sample dimensions:1 mm (0.04 in) to 10 mm (0.39 in)



SMD TEST FIXTURE 9677
- Direct connection type, For measuring SMDs with electrodes on the side; DC to 120 MHz, test sample dimensions: 3.5 mm ±0.5 mm (0.14 in ±0.02 in)



SMD TEST FIXTURE 9699
- Direct connection type, For measuring SMDs with electrodes on the bottom; DC to 120 MHz, test sample dimensions: 1.0 mm (0.04 in) to 4.0 mm (0.16 in) wide, max. 1.5 mm (0.06 in) high



CONTACT TIPS IM9901
- To replace the tip on the L2001, regular size, bundled with the L2001



CONTACT TIPS IM9902
- To replace the tip on the L2001, small size



PINCHER PROBE L2001
- DC to 8MHz, 50Ω termination 
- Tip electrode spacing: 0.3 to 6 mm 
- Measurable sample size: 0603 (EIA)
- PC communication



GP-IB CONNECTOR CABLE 9151-02
- 2 m (6.56 ft) length



PRINTER 9442
- For printing numerical values 112 mm (4.41 in) paper width, not CE marked



CONNECTION CABLE 9444
- 9 pin - 9 pin straight, 1.5 m (4.92 ft) length



RECORDING PAPER 1196
- 112 mm (4.41 in) × 25 m (82.03 ft), 10 rolls/set

DOWNLOADS

Catalog
C METER 3506-10, C HiTESTER 3504

Declaration of Conformity
C METER 3506-10

Ratings & Reviews

No reviews available

Be the first to Write a Review