AC/DC Clamp On 3284

(0) No Reviews yet
$600.00
SKU: 3284
Ships in approximately 15 days if not in stock.

Indent Basis Only

Hioki clamp meters are best-in-class measuring devices incorporating Hioki's expertise in current sensing technology. The 3284 is an AC/DC current and voltage clamp meter with analog output capabilities and a peak hold function. 

Key Features 
- Analog output for current measuring level, current measuring waveform, or frequency measuring level. 
- Peak hold function displays the crest value of the inrush current occurring when electrical equipment starts 
- AC,DC mode enables measurement of the RMS value of full- or half-wave rectified waveforms 

Product Warranty Period: 3 years

Included Accessories:
Test Lead L9207-10 ×1, Carrying Case 9399 ×1, Hand strap ×1, 6F22 (Stacked manganese battery) ×1, Instruction manual ×1
DC Current range20.00/ 200.0 A, Basic accuracy: ±1.3 % rdg. ±3 dgt.
AC Current range20.00/ 200.0 A (10 Hz to 2 kHz, True RMS),
Basic accuracy 45-66 Hz: ±1.3 % rdg. ±3 dgt.
DC Voltage range30.00 V to 600 V, 3 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt.
AC Voltage range30.00 V to 600 V, 3 ranges (10 to 1 kHz, True RMS),
Basic accuracy 45-66 Hz: ±1.0 % rdg. ±3 dgt.
Crest factor2.5 or less (1.5 at 200 A, 1.7 at 600 V)
Monitor, Analog outputDC, or AC 1 V/ f.s., Level output, Waveform output: DC to 20 kHz bandwidth (±3dB)
Resistance, Continuity checkN/A
Frequency range1.00 Hz to 1000 Hz, Basic accuracy: ±0.3 % rdg. ±1 dgt.
Other functionsAC+DC mode, Maximum/ Minimum/ Average value record function, Data hold, Peak hold, Auto power off, Auto zero
DisplayDisplay refresh rate: 4 times/s (FAST), 1 time/3s (SLOW), 4 times/s (bar graph)
Power supply6F22 (Stacked manganese battery) ×1, Continuous use: 25 hours, or AC adapter 9445-02/-03
Core jaw dia.φ 33 mm (1.30 in)
Dimensions and mass62 mm (2.44 in) W × 230 mm (9.06 in) H × 39 mm (1.54 in) D, 460 g (16.2 oz)
Included AccessoriesTest Lead L9207-10 ×1, Carrying Case 9399 ×1, Hand strap ×1, 6F22 (Stacked manganese battery) ×1, Instruction manual ×1
ACCESSORIES



CARRYING CASE 9399 



TEST LEAD L9207-10
90 cm (2.95 ft) length



AC ADAPTER 9445-02
For USA, 100 to 240 V AC, 9 V/ 1 A



OUTPUT CORD L9094
3.5 mm (0.14 in) dia. mini plug to banana, 1.5 m (4.92 ft) length



OUTPUT CORD L9095
Connect to BNC terminal, 1.5 m (4.92 ft) length



OUTPUT CORD L9096
Connect to terminal block, 1.5 m (4.92 ft) length

Ratings & Reviews

No reviews available

Be the first to Write a Review