Current Probe (0.5A, 5A, 30A. DC-50MHz) CT6710
Hioki flat bandwidth current probes are best-in-class current sensors for use with Memory HiCorders and high performance oscilloscopes. The CT6710 is a 3-range, high-sensitivity current probe that offers a wide DC to 50 MHz bandwidth and 200 microamp to 30 A input, letting your capture signals across an expansive current range, from steady state to transient currents, when developing switching power supplies, inverters, and motor controllers.
Key Features
- 3 ranges in a single probe - 30 A, 5 A, 0.5 A. Observe a wide current range from micro currents to 30 A.
- Wide band: DC to 50 MHz (-3 dB)
- High S/N ratio and 10 times output rate: Observe waveforms at 100 microamp/div at oscilloscope maximum voltage sensitivity setting of 1 mV/div
- Directly connect to an oscilloscope's BNC input terminal *1
*1 Connecting the probe's metal BNC terminal to a Memory HiCorder's plastic BNC terminal may damage
Included Accessories:
Instruction manual ×1, Carrying case ×1
Key Features
- 3 ranges in a single probe - 30 A, 5 A, 0.5 A. Observe a wide current range from micro currents to 30 A.
- Wide band: DC to 50 MHz (-3 dB)
- High S/N ratio and 10 times output rate: Observe waveforms at 100 microamp/div at oscilloscope maximum voltage sensitivity setting of 1 mV/div
- Directly connect to an oscilloscope's BNC input terminal *1
*1 Connecting the probe's metal BNC terminal to a Memory HiCorder's plastic BNC terminal may damage
Included Accessories:
Instruction manual ×1, Carrying case ×1
| Frequency bandwidth | DC to 50 MHz (-3 dB) |
|---|---|
| Rise time | 7.0 ns or shorter |
| Delay time (Typical) | 30 A range: 12 ns, 5 A range: 12 ns, 0.5 A range: 13 ns (Delay time relative to rising waveform of input signal 1 ns) |
| Noise level | 75 μA rms max (at 0.5 A range, using 20 MHz band measuring instrument) |
| Max. rated current | 30 A range: 30 A rms, 5 A range: 5 A rms, 0.5 A range: 0.5 A rms (DC, and sine wave, requires derating at frequency) |
| Max. allowable peak current | 30 A range: ±50 A peak (within the input limit time 2 s) 5 A range: ± 7.5 A peak, 0.5 A range: ± 0.75 A peak (< 10 MHz), ±0.3 A peak (≥ 10 MHz) |
| Amplitude accuracy | 30 A range: ±3.0% rdg. ±1 mV, (Typical) ±1.0% rdg. ±1 mV (≤ 10 Arms, DC, 45 to 66 Hz sine wave, within the maximum peak current of each range) 5 A range: ±3.0% rdg. ±1 mV, (Typical) ±1.0% rdg. ±1 mV (DC, 45 to 66 Hz sine wave, within the maximum peak current of each range) 0.5 A range: ±3.0% rdg. ±10 mV, (Typical) ±1.0% rdg. ±10 mV (DC, 45 to 66 Hz sine wave, within the maximum peak current of each range) |
| Output rate | 30 A range: 0.1 V/A, 5 A range: 1 V/A, 0.5 A range: 10 V/A, (The output of this probe is internally terminated, so connect to voltage input equipment with high input impedance such as 1MΩ) |
| Measurable conductors | φ 5 mm (0.20 in), Insulated conductor |
| Power supply | Supplied from Power Supply 3269, Probe Power Unit Z5021 |
| Cable length | Sensor cable (between relay box and sensor): 1.5 m (4.92 ft) Power cable: 1.0 m (3.28 ft) (Power plug: FFA.0S.304.CLAC37Y / LEMO inc.) |
| Dimensions and mass | Sensor: 155 mm (6.10 in)W × 18 mm (0.71 in)H × 26 mm (1.02 in)D, Relay box section: 45 mm (1.77 in)W × 120 mm (4.72 in)H × 25 mm (0.98 in)D Terminator section: 29 mm (1.14 in)W × 83 mm (3.27 in)H × 40 mm (1.57 in)D mm, 370 g (13.1 oz) |
| Included Accessories | Instruction manual ×1, Carrying case ×1 |
ACCESSORIES
POWER SUPPLY 3269
- 2 channels for CT6710 series or 4 channels for CT6700 and 3270 series
- ±12 V output
PROBE POWER UNIT Z5021
- Specified upon order of the MR6000, power max. 4 × CT6710 series, or max. 8 × other probes
POWER SUPPLY 3269
- 2 channels for CT6710 series or 4 channels for CT6700 and 3270 series
- ±12 V output
PROBE POWER UNIT Z5021
- Specified upon order of the MR6000, power max. 4 × CT6710 series, or max. 8 × other probes
DOWNLOADS
Catalog
- CURRENT SENSOR Series, CURRENT PROBE Series
Declaration of Conformity
- CURRENT PROBE CT6710,CT6711
Catalog
- CURRENT SENSOR Series, CURRENT PROBE Series
Declaration of Conformity
- CURRENT PROBE CT6710,CT6711