Differential Probe P9000-02

(0) No Reviews yet
$605.00
SKU: P9000-02
Ships in approximately 20 days if not in stock.

Contact for Lead Time

For the Memory HiCorder series, Wave/RMS


Key Features

- Compact probe for CAT III 1000V environments
- Use WAVE mode to observe instantaneous waveforms
- Use AC-RMS mode to observe RMS waveforms
- Principal applications
1. High-voltage battery circuits in vehicles such as EVs and HEVs
2. High-voltage circuits in solar power installations and other alternative energy systems
3. Commercial power circuits, for example 480 Vrms circuits
4. High-voltage surge noise from inverters, motors, and solenoids, etc.

Product Warranty Period: 1 year

P9000-01P9000-02
Measurement functionsWaveform monitor output only
Frequency characteristics: DC to 100 kHz, -3 dB
Waveform monitor output/AC RMS value output (switchable)
Wave mode frequency characteristics: DC to 100 kHz, -3 dB
RMS mode frequency characteristics: 30 Hz to 10 kHz; response time: 300 ms (rising) or 500 ms (falling)
Division ratio1000:1 or 100:1 (user selectable)
DC amplitude accuracy±0.5% f.s. (f.s. = 1.0 V; voltage division ratio: 1000:1) (f.s. = 3.5 V; voltage division ratio: 100:1)
RMS amplitude accuracyn/a±1% f.s. (30 Hz to 1 kHz non-inclusive, sine wave), ±3% f.s. (1 kHz to 10 kHz, sine wave)
Input resistance, capacityBetween H and L: 10.5 MΩ, 5 pF or less (at 100 kHz)
Max. allowable input1000 V AC/DC
Max. rated voltage to earth1000 V AC/DC (CAT III)
Operating temperature-40 ˚C (-40 ˚F) to 80 ˚C (176˚F)
Power supply(1) AC Adapter Z1008 (100 to 240 V AC, 50/60 Hz), 6 VA (including AC adapter) or 0.9 VA (probe only)
(2) USB bus power (5 V DC, USB Micro-B receptacle), 0.8 VA
To prevent an electric shock, when supplying power from the USB-microB terminal, please supply from a device which USB's GND terminal of the source device is grounded.
(3) External power supply (2.7 V to 15 V DC)
Dimensions and mass128 mm (5.04 in)W × 36 mm (1.42 in)H × 22 mm (0.87 in)D, 170 g (6.0 oz), Cord length: Input: 70 cm (2.30 ft) ; output: 1.5 m (4.92 ft)
AccessoriesInstruction manual ×1, alligator clips ×2, carrying case ×1

ACCESSORIES



AC ADAPTER Z1008
- 100 to 240V AC



GRABBER CLIP 9243
- Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length



EXTENSION CABLE SET L4931
- Expands the length of L4930/4940, 1.5 m (4.92 ft) length



TEST PIN SET L4932
- Attaches to the tip of the L4930/4940, CAT IV 600 V, CAT III 1000 V



SMALL ALLIGATOR CLIP SET L4934
- Attaches to the tip of the L4932, L9207-10/DT4911, L9206, CAT III 300 V, CAT II 600 V



ALLIGATOR CLIP SET L4935
- Attaches to the tip of the L4930/4940, CAT IV 600 V, CAT III 1000 V



BUS BAR CLIP SET L4936
- Attaches to the tip of the L4930/4940, CAT III 600 V



MAGNETIC ADAPTER SET L4937
- Attaches to the tip of the L4930/4940, CAT III 1000 V



TEST PIN SET L4938
- Attaches to the tip of the L4930/4940, CAT III 600 V



BREAKER PIN SET L4939
- Attaches to the tip of the L4930/4940, CAT III 600 V



CONVERSION CABLE L1011
- 30 cm (0.98 ft) length, covert BNC to wire



CONVERSION CABLE L1011-10
- 2.4 m (7.87 ft) length, covert BNC to wire

DOWNLOADS

Catalog
DIFFERENTIAL PROBE P9000

Declaration of Conformity
DIFFERENTIAL PROBE P9000-01,P9000-02

OPTIONS


P9000-01
- For the Memory HiCorder series, Wave only

Ratings & Reviews

No reviews available

Be the first to Write a Review