Digital Multimeter DT4253

(0)No Reviews yet
$255.00
SKU: DT4253
Ships in approximately 14 days if not in stock.

This item is IN STOCK

Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4253 is a digital multimeter designed specifically for HVAC testing, with DC V accuracy, temperature and clamp sensor testing, and wide 40 Hz to 1kHz bandwidth. 

 CAT IV 600 V, CAT III 1000 V 

Key Features
- DC V basic accuracy, wide 40 Hz to 1 kHz AC V frequency characteristics 
- Low-pass filter (100 Hz/ 500 Hz) cuts high harmonics 
- Includes multiple measurement functions such as temperature (only for DT4253), capacitance, and frequency - Measures large currents with optional clamp on probe (only for DT4251,DT4253) 
- USB communications function supports PC measurements (optional) 
- Broad -10 (14 degrees Fahrenheit) to 50 degrees Celsius (122 degrees Fahrenheit) operating temperature range 

Product Warranty Period: 3 years

Included Accessories:
Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4
DC Voltage range600.0 mV to 1000 V
5 ranges, Basic accuracy: ±0.3 % rdg. ±5 dgt.
AC Voltage range6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz to 1 kHz
Basic accuracy 40 - 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
AUTO AC/DCVYes
Resistance range600.0 Ω to 60.00 MΩ, 6 ranges, Basic accuracy: ±0.7 % rdg. ±5 dgt.
DC Current range60.00 μA to 60.00 mA, 4 ranges,
Basic accuracy: ±0.8 % rdg. ±5 dgt.
From 4 to 20mA Percentage conversion displayYes
AC Current range (use with Clamp on probes)10.00 A to 1000 A, 7 ranges, Add the Clamp on probe accuracy to basic accuracy 40 - 1 kHz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
Temperature (thermocouples)K: -40.0 to 400.0 °C , Add the Temperature probe accuracy to basic accuracy: ±0.5 % rdg. ±2 °C
Voltage detectionN/A
Capacitance range1.000 μF to 10.00 mF, 5 ranges, Basic accuracy: ±1.9 % rdg. ±5 dgt.
Frequency range99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage),
Basic accuracy: ±0.1 % rdg. ±1 dgt.
Continuity checkContinuity threshold [ON]: 25 Ω or less ,
[OFF]: 245 Ω or more,
Response time: 0.5 ms or more
Diode testOpen terminal voltage: 5.0 V or less, Testing current 0.5 mA or less,
Threshold of forward voltage: 0.15 V to 1.5 V
Other functionsFilter function, Display value hold, Auto hold, Max/Min/Average value display, Relative display, Auto-power save, USB communication (option)
DisplayMain and Sub displays: 4-digits LCD, max. 6000 digits, bar graph
Display refresh rates5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s)
Power supplyLR03 alkaline batteries ×4, Continuous use: 130 hours (backlight OFF)
Dimensions and mass84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D,
390 g (13.8 oz) (including batteries and holster)
Included AccessoriesTest lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4
ACCESSORIES



CLAMP ON PROBE 9132-50
- Use for level measurement 
- 40 Hz to 1 kHz 
- 20 to 1000A AC 
- 0.2 V AC/range output 
- 55 mm (2.17 in) core dia.



CLAMP ON PROBE 9018-50
- Excellent phase characteristics 
- 40 Hz to 3 kHz 
- 10 to 500A AC 
- 0.2V AC/range output 
- 46 mm (1.81 in) core dia.



MAGNETIC ADAPTER SET L4937
- Attaches to the tip of the banana plug cable, CAT III 1000V



BUS BAR CLIP SET L4936
- Attaches to the tip of the banana plug cable, CAT III 600V



ALLIGATOR CLIP SET L4935
- Attaches to the tip of the banana plug cable, CAT IV 600V, - CAT III 1000V



EXTENSION CABLE SET L4931
- Expands the length of the cable with banana plug, 1.5 m (4.92 ft) length



BREAKER PIN SET L4939
- Attaches to the tip of the banana plug cable, CAT III 600V



TEST PIN SET L4938
- Attaches to the tip of the banana plug cable, CAT III 600V



SMALL ALLIGATOR CLIP SET L4934
- Attaches to the tip of the L4932, L9207-10/DT4911, L9206, - CAT III 300V, CAT II 600V



TEST PIN SET L4932
- Attaches to the tip of the banana plug cable, CAT IV 600V, CAT III 1000V



CLAMP ON PROBE 9010-50
- Use for level measurement 
- 40 Hz to 1 kHz 
- 10 to 500 A AC 
- 0.2 V AC/range output 
- 46 mm (1.81 in) core dia.



CONVERSION ADAPTER 9704
- Receiving end: Female BNC; Output end: Male banana-plug *Not compatible with older generation Memory Hicorders with banana input terminals



GRABBER CLIP 9243
- Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length, CAT III 1000 V



COMMUNICATION PACKAGE (USB) DT4900-01
- For DT4280s/4250s, compatible to Windows 8.1/ 8/ 7/ Vista



CARRYING CASE C0201



CARRYING CASE C0202



MAGNETIC STRAP Z5020
- Extra strength



THERMOCOUPLES(K) DT4910
- K type, tip exposed, 0.3 mm (0.01 in) diameter, 80 cm (2.62 ft) length, -40 to 260 °C (-40 to 500 °F), tolerance 2.5 °C



TEST LEAD L9207-10
- 90 cm (2.95 ft) length



CONTACT PIN SET L4933
- Attaches to the tip of the Test Lead L9207-10/DT4911, L9206, 70V DC/ 33V AC



CONNECTION CABLE SET L4930
- 1.2 m (3.94 ft) length



GRABBER CLIP 9243
- Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length, CAT III 1000 V



EXTENSION CABLE SET L4931
- Expands the length of the cable with banana plug, 1.5 m (4.92 ft) length

Ratings & Reviews

No reviews available

Be the first to Write a Review