Digital Multimeter DT4281
The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters. The DT4281 is a high-precision 60000 count digital multimeter with all of the functions and features required for advanced testing in complex power and electrical applications.
Key Features
- 60000 count, 5-digit display, high-resolution measurements
- 0.025DC V basic accuracy, wide 20 Hz to 100 kHz AC V frequency characteristics
- Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
- Includes multiple measurement functions such as DC,ACV, temperature, capacitance, and frequency
- Terminal shutter mechanism (prevents erroneous test lead insertion)
- Measures large currents with optional clamp probe (only for DT4281, which has no 10 A terminal for accident prevention)
- Measure up to 10A with direct input (DT4282 only)
- Dual display lets you check voltage and frequency simultaneously
- Magnetic strap (Optional)
- Rear kickstand
- Store probes at the back of the tester
- Identify excessively high input with a red screen backlight
Product Warranty Period: 3 years
Included Accessories:
Test Lead L9207-10 × 1, Instruction Manual × 1, LR6 Alkaline Battery × 4
Key Features
- 60000 count, 5-digit display, high-resolution measurements
- 0.025DC V basic accuracy, wide 20 Hz to 100 kHz AC V frequency characteristics
- Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
- Includes multiple measurement functions such as DC,ACV, temperature, capacitance, and frequency
- Terminal shutter mechanism (prevents erroneous test lead insertion)
- Measures large currents with optional clamp probe (only for DT4281, which has no 10 A terminal for accident prevention)
- Measure up to 10A with direct input (DT4282 only)
- Dual display lets you check voltage and frequency simultaneously
- Magnetic strap (Optional)
- Rear kickstand
- Store probes at the back of the tester
- Identify excessively high input with a red screen backlight
Product Warranty Period: 3 years
Included Accessories:
Test Lead L9207-10 × 1, Instruction Manual × 1, LR6 Alkaline Battery × 4
| DC Voltage range | 60.000 mV to 1000.0 V, 6 ranges, Basic accuracy: ±0.025 % rdg. ±2 dgt. |
|---|---|
| AC Voltage* range | 60.000 mV to 1000.0 V, 6 ranges, Frequency characteristics: 20 Hz - 100 kHz Basic accuracy 45 - 65 Hz : ±0.2 % rdg. ±25 dgt. (True RMS, crest factor 3) |
| DC + AC Voltage* range | 6.0000 V to 1000.0 V, 4 ranges, Frequency characteristics: 20 Hz - 100 kHz Basic accuracy 45 - 65 Hz : ±0.3 % rdg. ±30 dgt. (True RMS, crest factor 3) |
| Resistance range | 60.000 Ω to 600.0 MΩ, 8 ranges, Basic accuracy: ±0.03 % rdg. ±2 dgt. |
| DC Current range | 600.00 μA to 600.00 mA, 4 ranges Basic accuracy: ±0.05 % rdg. ±5 dgt. |
| AC Current* range | 600.00 μA to 600.00 mA, 4 ranges Basic accuracy 45 - 65 Hz : ±0.6 % rdg. ±5 dgt. (True RMS, crest factor 3) Frequency characteristics: 20 Hz - 20 kHz (at 600 μA to 600 mA range) |
| AC Current* range (use with Clamp on probes) | 10.00 A to 1000 A, 7 ranges Add the Clamp on probe accuracy to Basic accuracy 40 - 65 Hz : ±0.6 % rdg. ±2 dgt. (True RMS, crest factor 3) |
| Peak | DC V measurement: Signal width 4 msec or more (single), 1 msec or more (repeated) AC V, DC/AC A measurement: Signal width 1 msec or more (single), 250 μsec or more (repeated) |
| Capacitance range | 1.000 nF to 100.0 mF, 9 ranges, Basic accuracy: ±1.0 % rdg. ±5 dgt. |
| Continuity Check | Continuity threshold: 20/50/100/500 Ω, Response time: 10 ms or more |
| Diode test | Open terminal voltage: 4.5 V or less, Testing current 1.2 mA or less, Threshold of forward voltage: 0.15 V to 3 V, seven stages |
| Frequency range | AC V, DC+AC V, AC A measurement, at pulse width 1 μs or more (50 % duty ratio) 99.999 Hz (0.5 Hz or more) to 500.00 kHz, 5 ranges, ±0.005 % rdg. ±3 dgt. |
| dB conversion | Standard impedance setting (dBm), 4 Ω to 1200 Ω, 20 stages Display dB conversion value of AC voltage (dBV) |
| Temperature (thermocouples) | K: -40.0 °C to 800.0 °C (-40.0 °F to 1472.0 °F) Add accuracy of the Thermocouple probe to main unit accuracy: ±0.5 % rdg. ±3 °C |
| Other functions | Filter function (Remove harmonic noise, use only at 600 VAC, 1000 VAC ranges), Display value hold, Auto hold, Max/Min value display, Sampling select, Relative display, Measurement memory (400 data), Auto-power save, USB communication (option), 4-20 mA % conversion |
| Display | Main and sub displays: 5-digits LCD, max. 60000 digits |
| Display refresh rates | 5 times/s (Capacitance measurement: 0.05 to 2 times/s, depending on measured value, Temperature: 1 time/s ) |
| Power supply | LR6 (AA) alkaline batteries × 4, Continuous use: 100 hours |
| Dimensions and mass | 93 mm (3.66 in) W × 197 mm (7.76 in) H× 53 mm (2.09 in) D, 650 g (22.9 oz) (with test leads holder and batteries) |
| Included Accessories | Test Lead L9207-10 × 1, Instruction Manual × 1, LR6 Alkaline Battery × 4 |
ACCESSORIES
CLAMP ON PROBE 9132-50
- Use for level measurement
- 40 Hz to 1 kHz
- 20 to 1000A AC
- 0.2 V AC/range output
- 55 mm (2.17 in) core dia.
CLAMP ON PROBE 9018-50
- Excellent phase characteristics
- 40 Hz to 3 kHz
- 10 to 500A AC
- 0.2V AC/range output
- 46 mm (1.81 in) core dia.
MAGNETIC ADAPTER SET L4937
- Attaches to the tip of the banana plug cable, CAT III 1000V
BUS BAR CLIP SET L4936
- Attaches to the tip of the banana plug cable, CAT III 600V
ALLIGATOR CLIP SET L4935
- Attaches to the tip of the banana plug cable, CAT IV 600V, - CAT III 1000V
EXTENSION CABLE SET L4931
- Expands the length of the cable with banana plug, 1.5 m (4.92 ft) length
BREAKER PIN SET L4939
- Attaches to the tip of the banana plug cable, CAT III 600V
TEST PIN SET L4938
- Attaches to the tip of the banana plug cable, CAT III 600V
SMALL ALLIGATOR CLIP SET L4934
- Attaches to the tip of the L4932, L9207-10/DT4911, L9206, - CAT III 300V, CAT II 600V
TEST PIN SET L4932
- Attaches to the tip of the banana plug cable, CAT IV 600V, CAT III 1000V
CLAMP ON PROBE 9010-50
- Use for level measurement
- 40 Hz to 1 kHz
- 10 to 500 A AC
- 0.2 V AC/range output
- 46 mm (1.81 in) core dia.
CONVERSION ADAPTER 9704
- Receiving end: Female BNC; Output end: Male banana-plug *Not compatible with older generation Memory Hicorders with banana input terminals
GRABBER CLIP 9243
- Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length, CAT III 1000 V
COMMUNICATION PACKAGE (USB) DT4900-01
- For DT4280s/4250s, compatible to Windows 8.1/ 8/ 7/ Vista
CARRYING CASE C0201
CARRYING CASE C0202
MAGNETIC STRAP Z5020
- Extra strength
TEST LEAD L9207-10
- 90 cm (2.95 ft) length
CONTACT PIN SET L4933
- Attaches to the tip of the Test Lead L9207-10/DT4911, L9206, 70V DC/ 33V AC
CONNECTION CABLE SET L4930
- 1.2 m (3.94 ft) length
GRABBER CLIP 9243
- Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length, CAT III 1000 V
EXTENSION CABLE SET L4931
- Expands the length of the cable with banana plug, 1.5 m (4.92 ft) length
CLAMP ON PROBE 9132-50
- Use for level measurement
- 40 Hz to 1 kHz
- 20 to 1000A AC
- 0.2 V AC/range output
- 55 mm (2.17 in) core dia.
CLAMP ON PROBE 9018-50
- Excellent phase characteristics
- 40 Hz to 3 kHz
- 10 to 500A AC
- 0.2V AC/range output
- 46 mm (1.81 in) core dia.
MAGNETIC ADAPTER SET L4937
- Attaches to the tip of the banana plug cable, CAT III 1000V
BUS BAR CLIP SET L4936
- Attaches to the tip of the banana plug cable, CAT III 600V
ALLIGATOR CLIP SET L4935
- Attaches to the tip of the banana plug cable, CAT IV 600V, - CAT III 1000V
EXTENSION CABLE SET L4931
- Expands the length of the cable with banana plug, 1.5 m (4.92 ft) length
BREAKER PIN SET L4939
- Attaches to the tip of the banana plug cable, CAT III 600V
TEST PIN SET L4938
- Attaches to the tip of the banana plug cable, CAT III 600V
SMALL ALLIGATOR CLIP SET L4934
- Attaches to the tip of the L4932, L9207-10/DT4911, L9206, - CAT III 300V, CAT II 600V
TEST PIN SET L4932
- Attaches to the tip of the banana plug cable, CAT IV 600V, CAT III 1000V
CLAMP ON PROBE 9010-50
- Use for level measurement
- 40 Hz to 1 kHz
- 10 to 500 A AC
- 0.2 V AC/range output
- 46 mm (1.81 in) core dia.
CONVERSION ADAPTER 9704
- Receiving end: Female BNC; Output end: Male banana-plug *Not compatible with older generation Memory Hicorders with banana input terminals
GRABBER CLIP 9243
- Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length, CAT III 1000 V
COMMUNICATION PACKAGE (USB) DT4900-01
- For DT4280s/4250s, compatible to Windows 8.1/ 8/ 7/ Vista
CARRYING CASE C0201
CARRYING CASE C0202
MAGNETIC STRAP Z5020
- Extra strength
TEST LEAD L9207-10
- 90 cm (2.95 ft) length
CONTACT PIN SET L4933
- Attaches to the tip of the Test Lead L9207-10/DT4911, L9206, 70V DC/ 33V AC
CONNECTION CABLE SET L4930
- 1.2 m (3.94 ft) length
GRABBER CLIP 9243
- Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length, CAT III 1000 V
EXTENSION CABLE SET L4931
- Expands the length of the cable with banana plug, 1.5 m (4.92 ft) length
DOWNLOADS
Catalog
- DIGITAL MULTIMETER DT4200 Series
Manual
- DIGITAL MULTIMETER DT4281,DT4282
Declaration of Conformity
- DIGITAL MULTIMETER DT4281,DT4282
Catalog
- DIGITAL MULTIMETER DT4200 Series
Manual
- DIGITAL MULTIMETER DT4281,DT4282
Declaration of Conformity
- DIGITAL MULTIMETER DT4281,DT4282