FT6380-50 KIT

(0) No Reviews yet
SKU: FT6380-50 KIT
To check availability please contact customerservice@hiokiusa.com prior to placing your order.

The FT6380-50 measures grounding resistance simply by clamping to multiple-grounded ground wires. No auxiliary grounding rod is needed, and there is no need to disconnect the ground wire from the grounding rod. The compact, low-profile sensor can be used to clamp ground wires with ease, and also provide AC current measurement functionality and can measure currents ranging from leakage current on the order of several mA to load currents of up to 60 A. 

The FT6380-50 KIT includes the Z3210 wireless adapter that allows the use of Gennect Cross, a complementary app designed specifically for use with Hioki measuring instruments, lets you check and manage measurement results and create reports.
Measurement principleInstrument has two cores for voltage injection and current measurement. From the defined voltage and measured current, the total circuit loop resistance is calculated
Note: For multi grounded systems only. In a multi-grounded system, the larger the number of grounding poles, the more accurate the measured value.
Earthing resistance range0.20 Ω (0.01 Ω resolution) to 1600 Ω (20 Ω resolution), 10 ranges, Zero suppression: Less than 0.02 Ω,
Accuracy: ±1.5 % rdg. ±0.02 Ω
AC Current range20.00 mA (0.01 mA resolution) to 60.0 A (0.1 A resolution), 5 ranges, Zero suppression: Less than 0.05 mA,
Accuracy: ±2.0 % rdg. ±0.05 mA (30 Hz to 400 Hz, True RMS), Crest factor 5.0 or less (for the 60 A range, 1.7 or less)
Maximum input current (Current measurement)100 A AC continuous, AC 200 A for 2 minutes or shorter (at 50 Hz/60 Hz, requires derating at frequency)
Maximum rated terminal-to-ground voltage600 VAC measurement category IV (anticipated transient overvoltage 8000 V)
Memory function2000 data
Alarm functionFor resistance measurement and current measurement, Beeps when measured value is less than or greater than threshold.
Other functionsData hold, Backlight, Filter, Auto power save, Wireless communication (without Z3210 installed))
DisplayLCD, Max. 2,000 count Display refresh rate: Approx. 2 times/sec.
Dust-proof and waterproofIP40 (EN60529) With Jaws Closed
Power supplyLR6 alkaline battery × 2
Continuous operating timeApprox. 40 hours (25 Ω measurement, backlight off, without Z3210 installed)
Approx. 35 hours (25 Ω measurement, backlight off, with Z3210 installed and using wireless communications)
Maximum measurable conductor diameterφ 32 mm (1.26 in)
Dimensions and mass73 mm (2.87 in) W × 218 mm (8.58 in) H × 43 mm (1.69 in) D, 620 g (21.9 oz)
AccessoriesCarrying case, Resistance check loop (1 Ω±2%, 25Ω±1%), Strap, LR6 alkaline battery × 2, Instruction manual

Ratings & Reviews

No reviews available

Be the first to Write a Review