IMPULSE WINDING TESTER ST4030A

(0) No Reviews yet
$17,990.00
SKU: ST4030A
Ships in approximately 20 days if not in stock.

Indent Basis Only

Production delay is expected due to the worldwide component shortages. Please contact a Hioki representative for details.

The ST4030A is an impulse winding tester, or surge tester, that combines the functions of both a resistance meter and insulation-withstand testing required for electric motor winding manufacturers to improve quality. Meet the needs of more reliable motor windings in light of the increasing use of electric vehicles and self-driving technology.

Key Features
- Identify previously undetectable defects
- Detect waveforms with high precision (200 MHz high speed sampling, high 12-bit resolution)
- Identify single-fault turns via quantification of response waveforms into LC and RC values
- Diagnose defective insulation (pseudo-shorts) between motor windings by testing for microscopic partial discharges hidden in noise (option)

Product Warranty Period: 1 year

Included Accessories:
Power cord ×1, Instruction Manual ×1, Application disc ×1, Usage notes ×1
Measurement items• Quantification (LC value, RC value) of the response waveform obtained when impulse voltage is applied, pass / fail judgment
• Waveform judgment using AREA value, Flutter, Laplacian etc.
• Equipped with dielectric breakdown voltage test function
Applied voltage100 V to 4200 V (Setting resolution: 10 V steps)
Maximum applied energy: approx. 88 mJ
Testable inductance range10 μH to 100 mH
Sampling200 M / 100 M / 50 M / 20 M / 10 MHz, Resolution: 12 bits, Number of data: 1001 to 800 points (1000 point steps)
Voltage detection accuracy[DC accuracy] ± 5% of setting, [AC band] 100 kHz: ± 1 dB
Determination methodLC · RC value judgment, waveform judgment, discharge judgment (when incorporating the ST9000)
Number of test condition tables255 (test condition setting, judgment condition setting, master waveform)
Test timeAbout 60 ms (3000 V, 1 pulse, reference value at decision OFF)
Display8.4-inch SVGA color TFT liquid crystal (800 × 600 dots), touch panel
InterfaceStandard:  EXT.I/O, USB host (memory), USB device (communication), LAN
Optional:  RS-232C (Z3001), GP-IB (Z3000)
Power supply100 V to 240 V AC, 50/60 Hz, 80 VA max.
Dimensions and mass215 mm (8.46 in)W × 200 mm (7.87 in)H × 348 mm (13.7 in)D, 6.7 kg (236.3 oz)
AccessoriesPower cord ×1, Instruction Manual ×1, Application disc ×1, Usage notes ×1
DOWNLOADS

Catalog
IMPULSE WINDING TESTER ST4030A

Declaration of Conformity
IMPULSE WINDING TESTER

Ratings & Reviews

No reviews available

Be the first to Write a Review