LCR HiTester 3511-50

(0) No Reviews yet
$2,541.00
SKU: 3511-50
Ships in approximately 20 days if not in stock.

Contact for Lead Time

Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components. The 3511-50 is a compact, general purpose LCR meter for on-board testing of capacitors and coils used in electrical equipment and devices such as automotive-related components.

Key Features
- High speed measurement: 5 ms (1 kHz) or 13 ms (120 Hz)
- Built-in high-speed comparator
- Measurement frequency: 1 kHz/120 Hz selectable
- From minute measurement with a maximum resolution of 0.01 pF to high-capacity measurement up to 1 F
- Print measured values and comparator results with the Printer 9442 (option)

Product Warranty Period: 3 years

Included Accessories:
Instruction manual × 1, Power cord × 1, Spare fuse × 1
Measurement parameters|Z|, θ, R, C, L, D (tanδ), Q
Measurement range|Z|, R: 10 mΩ to 200.00 MΩ θ: -90.00° to +90.00°
C (at 120 Hz): 9.40 pF to 999.99 mF, C (at 1 kHz): 0.940 pF to 99.999 mF
L (at 120 Hz): 14.00 µH to 200.00 kH, L (at 1 kHz): 1.600 µH to 20.000 kH
D: 0.0001 to 1.9900, Q: 0.85 to 999.99
Basic accuracy|Z| : ±0.08 % rdg. θ: ±0.05°
Measurement frequency120 Hz or 1 kHz
Measurement signal level50 mV, 500 mV, 1 V rms
Output impedance50 Ω
DisplayLED (5-digit display, full-scale count depends on range)
Measurement timeFast: 13 msec, Normal: 90 msec, Slow: 400 msec. (at 120 Hz)
Fast: 5 msec, Normal: 60 msec, Slow: 300 msec. (at 1 kHz)
DC biasDC voltage/DC current can be superimposed on the measurement signal.
(Requires optional unit and external constant voltage source/constant current source.)
FunctionsPanel save and load function, Comparator, External input/Output (EXT. I/O), GP-IB (option) or RS-232C interface
Power supplySelectable 100, 120, 220 or 240V AC ±10%, 50/60Hz, 20VA max.
Dimensions and mass210 mm (8.27 in) W × 100 mm (3.94 in) H × 168 mm (6.61 in) D, 2.5 kg (88.2 oz)
Included AccessoriesInstruction manual × 1, Power cord × 1, Spare fuse × 1

ACCESSORIES



4-TERMINAL PROBE 9140
- DC to 100 kHz, 1 m (3.28 ft) length, impedance characteristics of 75 Ω



TEST FIXTURE 9261
- DC to 8 MHz, 1 m (3.28 ft) length, impedance characteristics of 75 Ω



TEST FIXTURE 9262
- Direct connection type, DC to 8 MHz, measurable conductor diameter: ø0.3 (0.01 in) to 2 mm (0.08 in)



SMD TEST FIXTURE 9263
- Direct connection type, DC to 8 MHz, Test sample dimensions:1 mm (0.04 in) to 10 mm (0.39 in)



SMD TEST FIXTURE 9677
- Direct connection type, For measuring SMDs with electrodes on the side; DC to 120 MHz, test sample dimensions: 3.5 mm ±0.5 mm (0.14 in ±0.02 in)



SMD TEST FIXTURE 9699
- Direct connection type, For measuring SMDs with electrodes on the bottom; DC to 120 MHz, test sample dimensions: 1.0 mm (0.04 in) to 4.0 mm (0.16 in) wide, max. 1.5 mm (0.06 in) high



CONTACT TIPS IM9901
- To replace the tip on the L2001, regular size, bundled with the L2001



CONTACT TIPS IM9902
- To replace the tip on the L2001, small size



PINCHER PROBE L2001
- DC to 8MHz, 50Ω termination 
- Tip electrode spacing: 0.3 to 6 mm 
- Measurable sample size: 0603 (EIA)
- PC communication



GP-IB CONNECTOR CABLE 9151-02
- 2 m (6.56 ft) length



PRINTER 9442
- For printing numerical values 112 mm (4.41 in) paper width, not CE marked



CONNECTION CABLE 9444
- 9 pin - 9 pin straight, 1.5 m (4.92 ft) length



RECORDING PAPER 1196
- 112 mm (4.41 in) × 25 m (82.03 ft), 10 rolls/set

DOWNLOADS

Catalog
LCR HiTESTER 3511-50

Declaration of Conformity
LCR HiTESTER 3511-50

Ratings & Reviews

No reviews available

Be the first to Write a Review