LCR METER IM3533

(0)No Reviews yet
$4,345.00
SKU: IM3533
Ships in approximately 100 days if not in stock.

Out of stock, coming soon!

Production delay is expected due to the worldwide component shortages. Please contact a Hioki representative for details.


Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components. The IM3533 series are Hioki's first LCR meters to offer turn ration, mutual inductance and inductance difference measurements of transformers and coils, and are integrated with an internal DC bias to facilitate HDMI compliance testing.


Key Features
- 0.05% accuracy with wide measurement

Included Accessories:
Power cord × 1, Instruction manual × 1, CD-R (Includes PC commands and sample software) × 1

IM3533IM3533-01
Measurement modesLCR (Measurement with single condition), Transformer testing (N, M, ΔL), Continuous testing(Continuous measurement under saved conditions) (LCR mode)LCR (Measurement with single condition), Transformer testing (N, M, ΔL), Analyzer (sweep testing), Continuous Testing (LCR/Analyzer mode)
Measurement parametersZ, Y, θ, X, G, B, Q, Rdc (DC resistance), Rs (ESR), Rp, Ls, Lp, Cs, Cp, D (tanδ), N, M, ΔL, T
Measurement range100 mΩ to 100 MΩ, 10 ranges (All parameters defined in terms of Z.)
Displayable rangeZ, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp : ± (0.00000 [unit] to 9.99999G [unit]) Real value display for Z and Y only
θ: ± (0.000° to 180.000°), D: ± (0.00000 to 9.99999)
Q: ± (0.00 to 99999.9), Δ%: ± (0.0000% to 999.999%), T: -10.0°C to 99.9°C
Basic accuracyZ : ±0.05% rdg. θ: ±0.03°
Measurement frequency1 mHz to 200 kHz (5 digits setting resolution, minimum resolution 1 mHz)
Measurement signal level[Normal mode]
V mode, CV mode: 5 mV to 5 Vrms, 1 mVrms steps
CC mode: 10 μA to 50 mArms, 10 μArms steps
[Low impedance high accuracy mode]
V mode, CV mode: 5 mV to 2.5 Vrms, 1 mVrms steps
CC mode: 10 μA to 100 mArms, 10 μArms steps
Output impedanceNormal mode: 100 Ω, Low impedance high accuracy mode: 25 Ω
Display5.7-inch touch-screen color TFT, display can be set to ON/OFF
Measurement time2 ms (1 kHz, FAST, display OFF, representative value)
FunctionsDC bias measurement, DC resistance temperature compensation (converted reference temperature display), Comparator, BIN measurement (classify function), Panel loading/saving, Memory function
InterfacesEXT I/O (Handler), USB communication (high-speed), USB memory
Optional: Choose 1 from RS-232C, GP-IB, or LAN
Power supply100 to 240 V AC, 50/60 Hz, 50 VA max
Dimensions and mass330 mm (12.99 in) W × 119 mm (4.69 in) H × 168 mm (6.61 in) D, 3.1 kg (109.3 oz)
Included AccessoriesPower cord × 1, Instruction manual × 1, CD-R (Includes PC commands and sample software) × 1

ACCESSORIES



SMD TEST FIXTURE IM9100
- Direct-connection testing
- Test SMDs with electrodes on the bottom
- DC to 8MHz
- Measurable sample sizes: 01005 to 0402 (EIA)



4-TERMINAL PROBE 9140-10
- Cable length 1 m (3.28 ft), DC to 200 kHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, measurable conductor diameter: ø0.3 (0.01 in) to 5 mm (0.20 in)



TEST FIXTURE 9261-10
- Cable length 1 m (3.28 ft), DC to 8 MHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, measurable conductor diameter: ø0.3 (0.01 in) to 1.5 mm (0.06 in)



TEST FIXTURE 9262
- Direct connection type, DC to 8 MHz, measurable conductor diameter: ø0.3 (0.01 in) to 2 mm (0.08 in)



SMD TEST FIXTURE 9263
- Direct connection type, DC to 8 MHz, Test sample dimensions:1 mm (0.04 in) to 10 mm (0.39 in)



DC BIAS VOLTAGE UNIT 9268-10
- Direct connection type, 40 Hz to 8 MHz, maximum applied voltage of DC ±40 V



DC BIAS CURRENT UNIT 9269-10
- Direct connection type, 40 Hz to 2 MHz, maximum applied current of DC 2 A



4-TERMINAL PROBE 9500-10
- Cable length 1 m (3.28 ft), DC to 200 kHz, impedance characteristics of 50 Ω, measurable conductor diameter: φ0.3 mm (0.01 in) to 2 mm (0.08 in)



SMD TEST FIXTURE 9677
- Direct connection type, For measuring SMDs with electrodes on the side; DC to 120 MHz, test sample dimensions: 3.5 mm ±0.5 mm (0.14 in ±0.02 in)



SMD TEST FIXTURE 9699
- Direct connection type, For measuring SMDs with electrodes on the bottom; DC to 120 MHz, test sample dimensions: 1.0 mm (0.04 in) to 4.0 mm (0.16 in) wide, max. 1.5 mm (0.06 in) high



CONTACT TIPS IM9901
- To replace the tip on the L2001, regular size, bundled with the L2001



CONTACT TIPS IM9902
- To replace the tip on the L2001, small size



4-TERMINAL PROBE L2000
- Cable length 1 m (3.28 ft), DC to 8 MHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, measurable conductor diameter: ø0.3 (0.01 in) to 5 mm (0.20 in)



PINCHER PROBE L2001
- DC to 8MHz, 50Ω termination
- Tip electrode spacing: 0.3 to 6 mm
- Measurable sample size: 0603 (EIA)



SMD TEST FIXTURE IM9110
- For direct connection two-wire testing
- DC to 1 MHz
- Measurable sample size: 008004 (EIA)



GP-IB CONNECTOR CABLE 9151-02
- 2 m (6.56 ft) length



GP-IB INTERFACE Z3000
- GP-IB Interface



RS-232C INTERFACE Z3001
- RS-232C Interface



LAN INTERFACE Z3002
- Lan Interface



SHEATH TYPE TEMPERATURE PROBE 9478
- Pt100, Tip dia. φ2.3 mm (0.09 in), Cord length 1 m (3.28 ft), Waterproof construction

OPTIONS


IM3533-01
- Advanced function model

Ratings & Reviews

No reviews available

Be the first to Write a Review