LCR Meter IM3536
Production delay is expected due to the worldwide component shortages. Please contact a Hioki representative for details.
Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components. The IM3536 raises the industry standard for general-purpose LCR meters by offering a wide DC and 4Hz to 8MHz testing frequency while delivering 0.05% accuracy, ideal for evaluating the characteristics of next generation electronic components, including power supply inductors thanks to the instrument's maximum measurement frequency of 8MHz.
Key Features
- DC, 4Hz to 8MHz measurement frequency
- High-speed measurement of 1ms (fastest time)
- High-precision measurement of 0.05% rdg. (representative value)
- Guaranteed accuracy range from 1 mΩ, low-impedance measurement with unmatched repeatability
- DC bias function: Measure under conditions simulating actual use or in accordance with industry standards
- Exceptional specifications and cost-performance for a wide range of applications, from R&D to production lines
Included Accessories:
Power cord ×1, Instruction manual ×1, LCR application disc (Communications user manual) ×1
Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components. The IM3536 raises the industry standard for general-purpose LCR meters by offering a wide DC and 4Hz to 8MHz testing frequency while delivering 0.05% accuracy, ideal for evaluating the characteristics of next generation electronic components, including power supply inductors thanks to the instrument's maximum measurement frequency of 8MHz.
Key Features
- DC, 4Hz to 8MHz measurement frequency
- High-speed measurement of 1ms (fastest time)
- High-precision measurement of 0.05% rdg. (representative value)
- Guaranteed accuracy range from 1 mΩ, low-impedance measurement with unmatched repeatability
- DC bias function: Measure under conditions simulating actual use or in accordance with industry standards
- Exceptional specifications and cost-performance for a wide range of applications, from R&D to production lines
Included Accessories:
Power cord ×1, Instruction manual ×1, LCR application disc (Communications user manual) ×1
| Measurement modes | LCR (Measurement with single condition), Continuous testing (Continuous measurement under saved conditions) |
|---|---|
| Measurement parameters | Z, Y, θ, X, G, B, Q, Rdc (DC resistance), Rs (ESR), Rp, Ls, Lp, Cs, Cp, D (tanδ), σ, ε |
| Measurement range | 100 mΩ to 100 MΩ, 10 ranges (All parameters are determined according to Z) |
| Display range | Z: 0.00 m to 9.99999 GΩ, Y: 0.000 n to 9.99999 GS, θ: ± (0.000° to 180.000°), Q: ± (0.00 to 9999.99), Rdc: ± (0.00 m to 9.99999 GΩ), D: ± (0.00000 to 9.99999), Δ%: ± (0.000 % to 999.999 %), or other |
| Basic accuracy | Z ±0.05% rdg. θ: ±0.03° (representative value, Measurable range: 1 mΩ to 200 MΩ) |
| Measurement frequency | 4 Hz to 8 MHz (5 digits setting resolution, minimum resolution 10 mHz) |
| Measurement signal level | [Normal mode: V mode/CV mode] 4 Hz to 1.0000 MHz: 10 mV to 5 Vrms (maximum 50 mArms) 1.0001 MHz to 8 MHz: 10 mV to 1 Vrms (maximum 10mArms) [Low impedance high accuracy mode: V mode/CV mode] 4 Hz to 1.0000 MHz: 10 mV to 1 Vrms (maximum 100 mArms) [Normal mode: CC mode] 4 Hz to 1.0000 MHz: 10 μA to 50 mArms (maximum 5 Vrms) 1.0001 MHz to 8 MHz: 10 μA to 10 mArms (maximum 1 Vrms) [Low impedance high accuracy mode: CC mode] 4 Hz to 1.0000 MHz: 10 μA to 100 mArms (maximum 1 Vrms) [DC resistance measurement] Measurement signal level: Fixed at 1 V |
| DC bias measurement | Generating range: DC voltage 0 V to 2.50 V (10 mV resolution) In low Z high accuracy mode: 0 V to 1 V (10 mV resolution) |
| Output impedance | Normal mode: 100 Ω, Low impedance high accuracy mode: 10 Ω |
| Display | 5.7-inch color TFT with touch panel |
| Functions | Comparator, BIN measurement (10 categories for 2 measurement parameters), Trigger function, Open/short compensation, Contact check, Panel loading/saving, Memory function |
| Interfaces | EXT. I/O( HANDLER) ,USB, USB flash drive, LAN, GP-IB, RS-232C, BCD |
| Power supply | 100 to 240 V AC, 50/60 Hz, 50 VA max. |
| Dimensions and mass | 330 mm (12.99 in) W × 119 mm (4.69 in) H × 230 mm (9.06 in) D, 4.2 kg (148.1 oz) |
| Included Accessories | Power cord ×1, Instruction manual ×1, LCR application disc (Communications user manual) ×1 |
ACCESSORIES
SMD TEST FIXTURE IM9100
- Direct-connection testing
- Test SMDs with electrodes on the bottom
- DC to 8MHz
- Measurable sample sizes: 01005 to 0402 (EIA)
4-TERMINAL PROBE 9140-10
- Cable length 1 m (3.28 ft), DC to 200 kHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, measurable conductor diameter: ø0.3 (0.01 in) to 5 mm (0.20 in)
TEST FIXTURE 9261-10
- Cable length 1 m (3.28 ft), DC to 8 MHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, measurable conductor diameter: ø0.3 (0.01 in) to 1.5 mm (0.06 in)
TEST FIXTURE 9262
- Direct connection type, DC to 8 MHz, measurable conductor diameter: ø0.3 (0.01 in) to 2 mm (0.08 in)
SMD TEST FIXTURE 9263
- Direct connection type, DC to 8 MHz, Test sample dimensions:1 mm (0.04 in) to 10 mm (0.39 in)
DC BIAS VOLTAGE UNIT 9268-10
- Direct connection type, 40 Hz to 8 MHz, maximum applied voltage of DC ±40 V
DC BIAS CURRENT UNIT 9269-10
- Direct connection type, 40 Hz to 2 MHz, maximum applied current of DC 2 A
4-TERMINAL PROBE 9500-10
- Cable length 1 m (3.28 ft), DC to 200 kHz, impedance characteristics of 50 Ω, measurable conductor diameter: φ0.3 mm (0.01 in) to 2 mm (0.08 in)
SMD TEST FIXTURE 9677
- Direct connection type, For measuring SMDs with electrodes on the side; DC to 120 MHz, test sample dimensions: 3.5 mm ±0.5 mm (0.14 in ±0.02 in)
SMD TEST FIXTURE 9699
- Direct connection type, For measuring SMDs with electrodes on the bottom; DC to 120 MHz, test sample dimensions: 1.0 mm (0.04 in) to 4.0 mm (0.16 in) wide, max. 1.5 mm (0.06 in) high
CONTACT TIPS IM9901
- To replace the tip on the L2001, regular size, bundled with the L2001
CONTACT TIPS IM9902
- To replace the tip on the L2001, small size
4-TERMINAL PROBE L2000
- Cable length 1 m (3.28 ft), DC to 8 MHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, measurable conductor diameter: ø0.3 (0.01 in) to 5 mm (0.20 in)
PINCHER PROBE L2001
- DC to 8MHz, 50Ω termination
- Tip electrode spacing: 0.3 to 6 mm
- Measurable sample size: 0603 (EIA)
SMD TEST FIXTURE IM9110
- For direct connection two-wire testing
- DC to 1 MHz
- Measurable sample size: 008004 (EIA)
GP-IB CONNECTOR CABLE 9151-02
- 2 m (6.56 ft) length
- RS-232C CABLE 9637
- 9 pin - 9 pin, cross, 1.8 m (5.91 ft) length
SMD TEST FIXTURE IM9100
- Direct-connection testing
- Test SMDs with electrodes on the bottom
- DC to 8MHz
- Measurable sample sizes: 01005 to 0402 (EIA)
4-TERMINAL PROBE 9140-10
- Cable length 1 m (3.28 ft), DC to 200 kHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, measurable conductor diameter: ø0.3 (0.01 in) to 5 mm (0.20 in)
TEST FIXTURE 9261-10
- Cable length 1 m (3.28 ft), DC to 8 MHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, measurable conductor diameter: ø0.3 (0.01 in) to 1.5 mm (0.06 in)
TEST FIXTURE 9262
- Direct connection type, DC to 8 MHz, measurable conductor diameter: ø0.3 (0.01 in) to 2 mm (0.08 in)
SMD TEST FIXTURE 9263
- Direct connection type, DC to 8 MHz, Test sample dimensions:1 mm (0.04 in) to 10 mm (0.39 in)
DC BIAS VOLTAGE UNIT 9268-10
- Direct connection type, 40 Hz to 8 MHz, maximum applied voltage of DC ±40 V
DC BIAS CURRENT UNIT 9269-10
- Direct connection type, 40 Hz to 2 MHz, maximum applied current of DC 2 A
4-TERMINAL PROBE 9500-10
- Cable length 1 m (3.28 ft), DC to 200 kHz, impedance characteristics of 50 Ω, measurable conductor diameter: φ0.3 mm (0.01 in) to 2 mm (0.08 in)
SMD TEST FIXTURE 9677
- Direct connection type, For measuring SMDs with electrodes on the side; DC to 120 MHz, test sample dimensions: 3.5 mm ±0.5 mm (0.14 in ±0.02 in)
SMD TEST FIXTURE 9699
- Direct connection type, For measuring SMDs with electrodes on the bottom; DC to 120 MHz, test sample dimensions: 1.0 mm (0.04 in) to 4.0 mm (0.16 in) wide, max. 1.5 mm (0.06 in) high
CONTACT TIPS IM9901
- To replace the tip on the L2001, regular size, bundled with the L2001
CONTACT TIPS IM9902
- To replace the tip on the L2001, small size
4-TERMINAL PROBE L2000
- Cable length 1 m (3.28 ft), DC to 8 MHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, measurable conductor diameter: ø0.3 (0.01 in) to 5 mm (0.20 in)
PINCHER PROBE L2001
- DC to 8MHz, 50Ω termination
- Tip electrode spacing: 0.3 to 6 mm
- Measurable sample size: 0603 (EIA)
SMD TEST FIXTURE IM9110
- For direct connection two-wire testing
- DC to 1 MHz
- Measurable sample size: 008004 (EIA)
GP-IB CONNECTOR CABLE 9151-02
- 2 m (6.56 ft) length
- RS-232C CABLE 9637
- 9 pin - 9 pin, cross, 1.8 m (5.91 ft) length
