Memory HiCorder (256 MW) MR8847-52

(0) No Reviews yet
$8,789.00
SKU: MR8847-52
Ships in approximately 25 days if not in stock.

Contact for Lead Time

Max. 16ch, 256MW memory, main unit only

Hioki Memory HiCorders are high-speed waveform monitoring and recording devices that can simultaneously measure multiple physical phenomena such as voltage, current, temperature, vibration, acceleration and rotation due to complete isolation between channels and from each channel to the ground. The MR8847A delivers 20MS/s sampling, 16 isolated channels, and max. 1000V direct input, all housed in a tough and field-ready body to properly respond to the most challenging work sites from transformer substations to railway maintenance yards to paper and steel mills.

Key Features
- Supports a wide variety of measurements with a total of 13 plug-in modules
- Generate and record with a single unit
- Direct 1000 V high voltage input testing
- High-speed sampling up to 20MS/s with fully isolated inputs
- 16 analog + 16 logic channels to 64 logic + 10 analog channels
- High-speed sampling with waveform judgement function
- Soil-resistant construction strong against adverse working environments
- Big buttons coated to withstand industrial oil and residue
- Drop-in paper loading and one-touch setup, along with high-speed 50mm/s printing

Product Warranty Period: 3 years



Included Accessories:
Instruction manual ×1, Measurement guide ×1, Application disk (Wave viewer Wv, Communication commands table) ×1, Power cord ×1, Input cord label ×1, USB cable ×1, Printer paper ×1, Roll paper attachment ×2, Ferrite clamp ×1
Max. Number of channels16 ch analog + 16 ch logic, or 10 ch analog + 64 ch logic (when used with built-in logic input + plug-in Logic Unit 8973 × 3)
Number of slots8 slots (Max. 8), [Limitation on number of slots] when using the Current Unit 8971: Max. 4, when using the Logic Unit 8973: Max. 3
Number of logic channels16 ch logic (logic probe terminal GND share a common GND with chassis) Built-in logic input not available when using DVM Unit MR8990 on slots 1 or 2.
[Limitation on using built-in logic input] (with logic measurement ON)
• Measurement resolution on slots 1 and 2 is limited up to 12 bits
• Cannot use Frequency Unit 8970 on slots 1 or 2.
Measurement ranges (20 div full-scale)[Analog unit 8966]: 5 mV/div to 20 V/div, 12 ranges, resolution : 1/100 of range (using 12-bit A/D)
[High Voltage Unit U8974]: 200 mV/div to 50 V/div, 8 ranges, resolution : 1/1600 of range (using 16-bit A/D)
Max. allowable input400 V DC (using the 8966), 1000 V DC (using the U8974)
Frequency characteristicsDC to 5 MHz (-3 dB, using the 8966), DC to 100 kHz (using the U8794)
Time axis (Memory function)5 µs to 5 min/div (100 samples/div) 26 ranges, External sampling (100 samples/div, or free setting), Time axis zoom: x2 to x10 in 3 stages, compression: 1/2 to 1/200 000 in 16 stages
Measurement functionsMEMORY (high-speed recording), RECORDER (real-time recording), X-Y RECORDER (X-Y real-time recording), FFT
Other functionsWaveform judgment (at Memory or FFT function)
Memory capacityMR8847-51: Total 64 M-words (Memory expansion: none)
32 MW/ch (using 2 Analog channels), to 4 MW/ch (using 16 Analog channels)
MR8847-52: Total 256 M-words (Memory expansion: none)
128 MW/ch (using 2 Analog channels), to 16 MW/ch (using 16 Analog channels)
MR8847-53: Total 512 M-words (Memory expansion: none)
256 MW/ch (using 2 Analog channels), to 32 MW/ch (using 16 Analog channels)
Removable storageCF card slot (standard) ×1 (up to 2GB, FAT, or FAT-32 format), SSD (128 GB, optional), USB memory stick (USB 2.0)
Printing216 mm (8.50 in) × 30 m (98.43 ft), thermal paper roll, Recording speed : Max. 50 mm (1.97 in)/s
Display10.4 inch TFT color LCD (SVGA, 800 × 600 dots)
Displayable languagesEnglish, Japanese, Korean, Chinese
External interfaces[LAN] 100BASE-TX (FTP server, HTTP server), [USB] USB2.0 compliant, series A receptacle ×1, series B receptacle ×1, (File transfer internal drive/CF card to PC, or remote control from PC)
Power supply100 to 240 V AC, 50/60 Hz (130 VA max., when using printer: 220 VA max.),
10 to 28 V DC (when using the optional factory-installed DC Power Unit 9784)
Dimensions and mass351 mm (13.82 in) W × 261 mm (10.28 in) H × 140 mm (5.51 in) D,
7.6 kg (268.1 oz) (main unit only)
Included AccessoriesInstruction manual ×1, Measurement guide ×1, Application disk (Wave viewer Wv, Communication commands table) ×1, Power cord ×1, Input cord label ×1, USB cable ×1, Printer paper ×1, Roll paper attachment ×2, Ferrite clamp ×1

LabVIEW and MATLAB support

Compatible modelsLabVIEWMATLAB script
MR8847-51AvailableAvailable
MR8847-52AvailableAvailable
MR8847-53AvailableAvailable

ACCESSORIES



CLAMP ON PROBE 3275
- DC to 2MHz (-3dB) 
- 500Arms maximum input 
- 0.01V/A output 
- φ 20 mm (0.79 in) core dia.



CLAMP ON PROBE 3274
- DC to 10MHz (-3dB) 
- 150Arms maximum input 
- 0.01V/A output 
- φ 20 mm (0.79 in) core dia.



CLAMP ON PROBE 3276
- DC to 100MHz (-3dB) 
- 30Arms maximum input 
- 0.1V/A output 
- φ 5 mm (0.20 in) core dia.



CLAMP ON PROBE 3273-50
- DC to 50MHz (-3dB) 
- 30Arms maximum input 
- 0.1V/A output 
- φ 5 mm (0.20 in) core dia.



CLAMP ON PROBE 9132-50
- Use for level measurement 
- 40 Hz to 1 kHz 
- 20 to 1000A AC 
- 0.2 V AC/range output 
- φ 55 mm (2.17 in) core dia.



CLAMP ON PROBE 9018-50
- Excellent phase characteristics 
- 40 Hz to 3 kHz 
- 10 to 500A AC 
- 0.2V AC/range output 
- φ 46 mm (1.81 in) core dia.




DISPLAY UNIT CM7291
- Built in Bluetooth Smart 
- Use with CT7000 series Current sensor 
- DCA, ACA, (DC+AC)A, frequency 
- Output to oscilloscopes: WAVE, RMS, PEAK, Hz 
- Power supply for single sensor



DISPLAY UNIT CM7290
- Use with CT7000 series Current sensor 
- DCA, ACA, (DC+AC)A, frequency 
- Output to oscilloscopes: WAVE, RMS, PEAK, Hz 
- Power supply for single sensor



AC/DC AUTO-ZERO CURRENT SENSOR CT7742
- DC to 5 kHz (-3dB) 
- Rated 2000 A AC/DC 
- φ 55 mm (2.17 in) core dia.



AC/DC AUTO-ZERO CURRENT SENSOR CT7736
- DC to 5 kHz (-3dB) 
- Rated 600 A AC/DC 
- φ 33 mm (1.30 in) core dia



AC/DC AUTO-ZERO CURRENT SENSOR CT7731
- DC to 5 kHz (-3dB) 
- Rated 100 A AC/DC 
- φ 33 mm (1.30 in) core dia.



AC/DC CURRENT SENSOR CT7642
- DC to 10kHz (-3dB) 
- Rated 2000 A AC/DC 
- 0.1mV/A output 
- φ 55 mm (2.17 in) core dia.



AC/DC CURRENT SENSOR CT7636
- DC to 10kHz (-3dB) 
- Rated 600 A AC/DC 
- 1mV/A output 
- φ 33 mm (1.30 in) core dia.



AC/DC CURRENT SENSOR CT7631
- DC to 10kHz (-3dB) 
- Rated 100 A AC/DC 
- 1mV/A output 
- φ 33 mm (1.30 in) core dia.



CARRYING CASE 9783
- For the MR8847s/8847s, includes compartment for options, hard trunk type



CONNECTION CORD L9217
- Cord has insulated BNC connectors at both ends, 1.6 m (5.25 ft) length



AC/DC AUTO-ZERO CURRENT SENSOR CT7742
- DC to 5 kHz (-3dB) 
- Rated 2000 A AC/DC 
- φ 55 mm (2.17 in) core dia.



AC/DC CURRENT SENSOR CT7642
- DC to 10kHz (-3dB) 
- Rated 2000 A AC/DC 
- 0.1mV/A output 
- φ 55 mm (2.17 in) core dia.



DC POWER UNIT 9784
- Factory-installed option - not user installable, built in on the bottom case. 10 to 28 V DC drive.



SSD UNIT U8331
- Specified upon order, built-in type, 128 GB



AC ADAPTER Z1008
- 100 to 240V AC



DIFFERENTIAL PROBE P9000
- Waveform only for exclusive use with Memory HiCorders (P9000-01) or waveform/RMS value switchable (P9000-02
- For use with input of up to 1 kV AC/DC 
- Requires separate power supply



CONTACT PIN 9790-03
- Red/black set attaches to the ends of the Connection Cord L9790



ALLIGATOR CLIP L9790-01
- Red/black set attaches to the ends of the Connection Cord L9790



GRABBER CLIP 9790-02
- Red/black set attaches to the ends of the Connection Cord L9790



CONNECTION CORD L9197
- φ 5.0 mm (0.20 in) dia 
- Cable allows for up to 600 V input 
- 1.8 m (5.91 ft) length 
- Includes detachable large alligator clips



CONNECTION CORD L9198
- φ 5.0 mm (0.20 in) dia. 
- Cable allows for up to 300 V input 
- 1.7 m (5.58 ft) length 
- Small alligator clip



AC ADAPTER 9418-15
- 100 to 240V AC



DIFFERENTIAL PROBE 9322
- For up to 2 kV DC or 1 kV AC 
- Use with AC Adapter 9418-15 
- Frequency band width up to 10MHz



MAGNETIC ADAPTER SET L4937
- Attaches to the tip of the banana plug cable, CAT III 1000V



BUS BAR CLIP SET L4936
- Attaches to the tip of the banana plug cable, CAT III 600V



ALLIGATOR CLIP SET L4935
- Attaches to the tip of the banana plug cable, CAT IV 600V, CAT III 1000V



EXTENSION CABLE SET L4931
- Expands the length of the cable with banana plug, 1.5 m (4.92 ft) length



CONNECTION CABLE SET L4940
- Banana plug - banana plug, 1.5 m (4.92 ft) length, red/black each 1



TEST LEAD L2200
- 70 cm (2.30ft) length, detachable large alligator clips or needle tips are bundled, CAT IV 600V, CAT III 1000V



100:1 PROBE, 10:1 PROBE 9666, 9665
- Max. rated voltage to earth is same as for input module 
- 1.5 m (4.92 ft) length 
- Max. input voltage: 9666: 5 kV peak (up to 1MHz); 9665: 1 kV rms (up to 500 kHz)



LAN CABLE 9642
- Straight Ethernet cable, supplied with straight to cross conversion adapter, 5 m (16.41 ft) length



OUTPUT CORD L9094
- 3.5 mm (0.14 in) dia. mini plug to banana, 1.5 m (4.92 ft) length



AC ADAPTER 9445-02
- For USA, 100 to 240 V AC, 9 V/ 1 A



CONVERSION CABLE 9323
- Used for connecting the 9320/9321/MR9321 and the 9324 to the Memory HiCorder with small logic terminal models



LOGIC PROBE MR9321,MR9321-01
- 4 isolated channels 
- ON/OFF detection of AC/DC voltage 
- Large terminal type



LOGIC PROBE 9320-01
- 4 channels for contact voltage signals 
- 500ns response 
- Miniature terminal type



LOGIC PROBE 9327
- 4 channels for contact voltage signals 
- High-speed 100ns response



POWER SUPPLY 3269
- For Hioki wide bandwidth current probes 
- Connect up to four sensors



GRABBER CLIP 9243
- Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length, CAT III 1000 V



CONVERSION ADAPTER 9199
- Receiving side banana, output BNC terminal



CONVERSION CABLE 9318
- To connect the CT6841-6846, CT6865/63/62, 9709, 9272-10 to the 8971/40/51, 38 cm (14.96 in) length



CONNECTION CORD 9165
- Cord has metallic BNC connectors at both ends, use at metallic terminal, 1.5 m (4.92 ft) length



CONNECTION CORD L9217
- Cord has insulated BNC connectors at both ends, 1.6 m (5.25 ft) length



CONNECTION CABLE L9795-02
- SMB to BNC terminal, 1.5 m (4.92 ft) length



CONNECTION CABLE L9795-01
- SMB to alligator clip, 1.5 m (4.92 ft) length



WAVEFORM GENERATOR UNIT MR8790
- 4 ch 
- DC output ± 10 V 
- Sinewave output 10 mHz to 20 kHz



PULSE GENERATOR UNIT MR8791
- 8 ch 
- Pulse output 0.1 Hz to 20 kHz 
- Pattern output




ARBITRARY WAVEFORM GENERATOR UNIT U8793
- 2ch, 10 mHz to 100kHz function generator 
- Arbitrary waveform generator function 2 MHz D/A refresh rate 
- Max.15 V output




LAN COMMUNICATOR 9333
- For LAN communication with the MR8740/8741, MR8847 series, 8826 
- For data collection and remote control



WAVE PROCESSOR 9335
- Convert data, print and display waveforms



FREQ UNIT 8970
- 2 ch, for measurement of frequency, rpm, pulse, etc.

HIGH VOLTAGE UNIT U8974
- 2 ch, 1000 V DC, 700 V AC max. voltage input



DIGITAL VOLTMETER UNIT MR8990
- 2 ch, high-precision DC V, 0.1 μV resolution, high-speed sampling 500 times/s



LOGIC UNIT 8973
- 4 terminals, 16 ch



DC/RMS UNIT 8972
- 2 ch, voltage/DC to 400 kHz, RMS rectifier, DC and 30 to 100 kHz bandwidth



CURRENT UNIT 8971
- 2 ch, for measuring current using dedicated current sensors, bundled two Conversion cable 9318



HIGH RESOLUTION UNIT 8968
- 2 ch, voltage input, DC to 100 kHz bandwidth





TEMP UNIT 8967
- 2 ch, thermocouple temperature input



ANALOG UNIT 8966
- 2 ch, Voltage input, DC to 5 MHz bandwidth



POWER SUPPLY 3272
- For Hioki wide bandwidth current probes 
- Single sensor connectable



AC ADAPTER Z1008
- 100 to 240V AC



RECORDING PAPER 9231
- A4 width 216 mm (8.50 in) × 30 m (98.43 ft), 6 rolls/set



PC CARD 9830
- 2 GB capacity 
- PC card adapter bundled



PC CARD 1G 9729
- 1 GB capacity 
- PC card adapter bundled



PC CARD 512M 9728
- 512 MB capacity 
- PC card adapter bundled



EXTENSION CABLE SET L4931
- Expands the length of the cable with banana plug, 1.5 m (4.92 ft) length



GRABBER CLIP 9243
- Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length, CAT III 1000 V

OPTIONS


MR8847-51
- Max. 16ch, 64MW memory, main unit only


MR8847-53
- Max. 16ch, 512MW memory, main unit only

Ratings & Reviews

No reviews available

Be the first to Write a Review