Memory HiCorder MR6000

(0) No Reviews yet
$13,600.00
SKU: MR6000
Ships in approximately 25 days if not in stock.

Indent Basis Only

Production delay is expected due to the worldwide component shortages. Please contact a Hioki representative for details.


The MR6000 overcomes all barriers to reach new ground and meet challenges that are yet to be seen. World class specifications, operability and design - Hioki's newest memory recorder has been re-engineered from top to bottom, delivering unprecedented performance that will change how you look at waveform recording.


Key Features
- Work efficiently and intuitively using the MR6000s large touch panel
- Capture momentary phenomena by performing isolation measurement at up to 200 MS/s (when using the High Speed Analog Unit U8976)
- Enjoy a stress-free user experience thanks to dramatically faster saving of data
- Save data in real time while measurement continues.
- Take advantage of new functionality added by the latest firmware update (April 2020)

Product Warranty Period: 3 years

MR6000MR6000-01
Additional functionN/AReal-time waveform calculation, Digital Filter calculation
Number of input unitsMax. 8 units
Number of channelsMax. 32 analog channels (when using the U8975), or 128 logic channels (when using the 8973)
Measurement ranges (20 div full-scale)10 mV to 400 V f.s., 12 ranges (when using the U8976), Resolution : 1/1600 of range
4 V to 200 V f.s., 6 ranges (when using the U8975), Resolution : 1/32000 of range
Max. allowable input400 V DC (when using the U8976), 200 V DC (when using the U8975)
Frequency characteristicsDC to 30 MHz (when using the U8976), DC to 2 MHz (when using the U8975)
Max. sampling rate200 MS/s, all channnels simultaneously (when using the U8976)
External sampling: 10 MS/s
Recording methodsNormal: Normal waveform recording
Envelope: Record maximum and minimum values every fixed period
Storage memory capacity1 G-words
Removable storageSD memory card ×1, USB memory ×7, SSD/HDD (built in the main unit) ×1
FTP transmission (to LAN-connected computer) *Use only Storage Media sold by HIOKI.
Display12.1 inch XGA-TFT color LCD (1024 × 768 dots)
External interfacesLAN, USB, SD, SATA, Monitor output
Power supply100 to 240 V AC (50/60 Hz) (300 VA max.)
Dimensions and mass353 mm (13.9 in)W × 235 mm (9.25 in)H × 154.8 mm (6.09 in)D, 6.5 kg (229.3 oz) (main unit only)
AccessoriesPower cord ×1, Quick start manual ×1, Precautions conserning use ×1, Application disk (CD-R) ×1, Instruction manual (CD-R, detail and calculation) ×1 , Blank panel (for blank slots only)

ACCESSORIES



CLAMP ON PROBE 3275
- DC to 2MHz (-3dB)
- 500Arms maximum input 
- 0.01V/A output 
- φ 20 mm (0.79 in) core dia.



CLAMP ON PROBE 3274
- DC to 10MHz (-3dB) 
- 150Arms maximum input 
- 0.01V/A output 
- φ 20 mm (0.79 in) core dia.



CLAMP ON PROBE 3276
- DC to 100MHz (-3dB) 
- 30Arms maximum input 
- 0.1V/A output 
- φ 5 mm (0.20 in) core dia.



CLAMP ON PROBE 3273-50
- DC to 50MHz (-3dB) 
- 30Arms maximum input 
- 0.1V/A output 
- φ 5 mm (0.20 in) core dia.



CARRYING CASE C1010
- For the MR6000, hard trunk type, for storing options




CONNECTION CORD L9217
- Cord has insulated BNC connectors at both ends, 1.6 m (5.25 ft) length



SSD UNIT U8332
- Specified upon order, built-in type, 256 GB



HD UNIT U8333
- Specified upon order, built-in type, 320 GB



CLAMP ON SENSOR 9272-05
- 1Hz to 100kHz (Phase: 5Hz to 50kHz) 
- Rated 20A/200A AC/DC 
- φ 46 mm (1.81 in) core dia.



AC/DC CURRENT PROBE CT6843-05
- DC to 500kHz (Phase: up to 300kHz) 
- Rated 200A AC/DC 
- φ 20 mm (0.79 in) core dia.



AC/DC CURRENT PROBE CT6841-05
- DC to 1MHz (Phase: up to 300kHz) 
- Rated 20A AC/DC 
- φ 20 mm (0.79 in) core dia.



AC/DC CURRENT SENSOR CT6863-05
- DC to 500kHz (Phase: up to 300kHz) 
- Rated 200A AC/DC 
- φ 24 mm (0.94 in) core dia.



AC/DC CURRENT SENSOR CT6862-05
- DC to 1MHz (Phase: up to 300kHz) 
- Rated 50A AC/DC 
- φ 24 mm (0.94 in) core dia.



DIFFERENTIAL PROBE P9000
- Waveform only for exclusive use with Memory HiCorders (P9000-01) or waveform/RMS value switchable (P9000-02)

- For use with input of up to 1 kV AC/DC 
- Requires separate power supply



AC ADAPTER Z1008
- 100 to 240V AC



CONNECTION CORD L9790
- Flexible φ 4.1 mm (0.16 in) thin dia. 
- Cable allowing for up to 600 V input 
- 1.8 m (5.91 ft) length



ALLIGATOR CLIP L9790-01
- Red/black set attaches to the ends of the Connection Cord L9790



GRABBER CLIP 9790-02
- Red/black set attaches to the ends of the Connection Cord L9790



CONTACT PIN 9790-03
- Red/black set attaches to the ends of the Connection Cord L9790



CONNECTION CORD L9197
- φ 5.0 mm (0.20 in) dia 
- Cable allows for up to 600 V input 
- 1.8 m (5.91 ft) length 
- Includes detachable large alligator clips



CONNECTION CORD L9198
- φ 5.0 mm (0.20 in) dia. 
- Cable allows for up to 300 V input 
- 1.7 m (5.58 ft) length 
- Small alligator clip



AC ADAPTER 9418-15
- 100 to 240V AC



DIFFERENTIAL PROBE 9322
- For up to 2 kV DC or 1 kV AC 
- Use with AC Adapter 9418-15 
- Frequency band width up to 10MHz



MAGNETIC ADAPTER SET L4937
- Attaches to the tip of the banana plug cable, CAT III 1000V



BUS BAR CLIP SET L4936
- Attaches to the tip of the banana plug cable, CAT III 600V



ALLIGATOR CLIP SET L4935
- Attaches to the tip of the banana plug cable, CAT IV 600V, CAT III 1000V



EXTENSION CABLE SET L4931
- Expands the length of the cable with banana plug, 1.5 m (4.92 ft) length



CONNECTION CABLE SET L4940
- Banana plug - banana plug, 1.5 m (4.92 ft) length, red/black each 1



TEST LEAD L2200
- 70 cm (2.30ft) length, detachable large alligator clips or needle tips are bundled, CAT IV 600V, CAT III 1000V



100:1 PROBE, 10:1 PROBE 9666, 9665
- Max. rated voltage to earth is same as for input module 
- 1.5 m (4.92 ft) length 
- Max. input voltage: 9666: 5 kV peak (up to 1MHz); 9665: 1 kV rms (up to 500 kHz)



OUTPUT CORD L9095
- Connect to BNC terminal, 1.5 m (4.92 ft) length



OUTPUT CORD L9094
- 3.5 mm (0.14 in) dia. mini plug to banana, 1.5 m (4.92 ft) length



AC ADAPTER 9445-02
- For USA, 100 to 240 V AC, 9 V/ 1 A



LOGIC PROBE MR9321,MR9321-01
- 4 isolated channels 
- ON/OFF detection of AC/DC voltage 
- Large terminal type




LOGIC PROBE 9320-01
- 4 channels for contact voltage signals 
- 500ns response 
- Miniature terminal type



LOGIC PROBE 9327
- 4 channels for contact voltage signals 
- High-speed 100ns response



PROBE POWER UNIT Z5021
*Must specify when ordering
*Power can be supplied to up to 8 current sensors, including the current sensors connected to the CURRENT UNIT 8971.Specified upon order, DC ±12 V, supply for up to 8 units



POWER SUPPLY 3269
- For Hioki wide bandwidth current probes 
- Connect up to four sensors



CONVERSION CABLE CT9901
- ME15W (12 pin) to PL23 (10 pin) connector



GRABBER CLIP 9243
- Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length, CAT III 1000 V



CONNECTION CORD L9217

- Cord has insulated BNC connectors at both ends, 1.6 m (5.25 ft) length



CONVERSION ADAPTER 9199
- Receiving side banana, output BNC terminal



CONVERSION CABLE 9318
- To connect the CT6841-6846, CT6865/63/62, 9709, 9272-10 to the 8971/40/51, 38 cm (14.96 in) length



CONNECTION CABLE L9795-01
- SMB to alligator clip, 1.5 m (4.92 ft) length



CONNECTION CABLE L9795-02
- SMB to BNC terminal, 1.5 m (4.92 ft) length



OUTPUT CORD L9096
- Connect to terminal block, 1.5 m (4.92 ft) length



WAVE PROCESSOR 9335
- Convert data, print and display waveforms



LAN CABLE 9642
- Straight Ethernet cable, supplied with straight to cross conversion adapter, 5 m (16.41 ft) length



CONVERSION CABLE CT9900
- Convert PL23 (10-pin) terminal to ME15W (12-pin) terminal



CHARGE UNIT U8979
- Measure acceleration waveforms across 2 channels 
- Charge output type acceleration pickup 
- Preamplifier built-in acceleration pickup



4CH ANALOG UNIT U8978
- 4 ch instantaneous waveforms 
- DC to 2 MHz bandwidth



3CH CURRENT UNIT U8977
- 3 ch, current measurement 
- DC to 2 MHz bandwidth



4CH ANALOG UNIT U8975
- 4 ch 
- DC to 2 MHz bandwidth



HIGH SPEED ANALOG UNIT U8976
- 2 ch 
- DC to 30 MHz bandwidth




HIGH VOLTAGE UNIT U8974
- 2 ch, 1000 V DC, 700 V AC max. voltage input



DIGITAL VOLTMETER UNIT MR8990
- 2 ch, high-precision DC V, 0.1 μV resolution, high-speed sampling 500 times/s



LOGIC UNIT 8973
- 4 terminals, 16 ch



DC/RMS UNIT 8972
- 2 ch, voltage/DC to 400 kHz, RMS rectifier, DC and 30 to 100 kHz bandwidth



CURRENT UNIT 8971
- 2 ch, for measuring current using dedicated current sensors, bundled two Conversion cable 9318



FREQ UNIT 8970
- 2 ch, for measurement of frequency, rpm, pulse, etc.



HIGH RESOLUTION UNIT 8968
- 2 ch, voltage input, DC to 100 kHz bandwidth



TEMP UNIT 8967
- 2 ch, thermocouple temperature input



ANALOG UNIT 8966
- 2 ch, Voltage input, DC to 5 MHz bandwidth



POWER SUPPLY 3272
- For Hioki wide bandwidth current probes 
- Single sensor connectable



AC ADAPTER Z1008
- 100 to 240V AC



SENSOR UNIT CT9557
- Power supply for current sensors when used alone 
- 4ch, with Waveform/Total Waveform/Total RMS output



SENSOR UNIT CT9556
- Power supply for current sensors when used alone 
- 1ch, with Waveform/RMS output



SENSOR UNIT CT9555
- Power supply for current sensors when used alone 
- 1ch, with Waveform output



USB DRIVE Z4006
- 16 GB, Long-life, High-reliability SLC Flash Memory



SD MEMORY CARD Z4003
- 8 GB capacity



SD MEMORY CARD 2GB Z4001
- 2 GB capacity




AC/DC CURRENT PROBE CT6846-05
- DC to 20kHz (Phase: up to 20kHz) 
- Rated 1000A AC/DC 
- φ 50 mm (1.79 in) core dia.



AC/DC CURRENT SENSOR CT6876
- DC to 1.5MHz (Phase: up to 1MHz) 
- Rated 1000A AC/DC 
- φ 36 mm (1.42 in) core dia.



AC/DC CURRENT PROBE CT6846-05
- DC to 20kHz (Phase: up to 20kHz)
- Rated 1000A AC/DC 
- φ 50 mm (1.79 in) core dia.



AC/DC CURRENT SENSOR CT6876
- DC to 1.5MHz (Phase: up to 1MHz) 
- Rated 1000A AC/DC 
- φ 36 mm (1.42 in) core dia.



SENSOR UNIT CT9557
- Power supply for current sensors when used alone 
- 4ch, with Waveform/Total Waveform/Total RMS output




AC/DC CURRENT SENSOR CT6876
- DC to 1.5MHz (Phase: up to 1MHz) 
- Rated 1000A AC/DC 
- φ 36 mm (1.42 in) core dia.




AC/DC CURRENT PROBE CT6845-05
- DC to 100kHz (Phase: up to 100kHz) 
- Rated 500A AC/DC 
- φ 50 mm (1.97 in) core dia.



AC/DC CURRENT PROBE CT6844-05
- DC to 200kHz (Phase: up to 200kHz) 
- Rated 500A AC/DC 
- φ 20 mm (0.79 in) core dia.



AC/DC CURRENT SENSOR CT6875
- DC to 2MHz (Phase: up to 1MHz) 
- Rated 500A AC/DC 
- φ 36 mm (1.42 in) core dia.



GRABBER CLIP 9243
- Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length, CAT III 1000 V



EXTENSION CABLE SET L4931
- Expands the length of the cable with banana plug, 1.5 m (4.92 ft) length

DOWNLOADS

Catalog
MEMORY HiCORDER MR6000

Declaration of Conformity
MEMORY HiCORDER MR6000,MR6000-01

OPTIONS


MR6000-01
- Built-in real-time waveform calculation and other functionality

Ratings & Reviews

No reviews available

Be the first to Write a Review