NON-CONTACT CAN SENSOR SP7001-90

(0) No Reviews yet
$2,950.00
SKU: SP7001-90
Ships in approximately 20 days if not in stock.

Indent Basis Only

Supports CAN FD / CAN signals, SP7001, SP7100, SP9200 set

The SP7001 and SP7002 are CAN and CAN FD signal sensors that use non-contact technology to accurately capture CAN bus signals necessary for vehicle and next generation equipment evaluation and development. Improve testing productivity and efficiency by eliminating the need to peel away cable insulation or use a sub-harness that is traditionally required to obtain signals.


Key Features
- Acquire CAN data immediately, simply by hooking probes to the cables
- Eliminate concerns by using non-contact sensing technology
- Use in a diverse array of development and evaluation applications that demand reliability

Product Warranty Period: 3 years

Included Accessories:
Quick stard manual (Japanese and English) ×1 each, Operating precautions ×1, Spiral tube ×1, Power cable L9500 ×1, Alligator clip ×1, Ground connection cable ×1
Detection methodCapacitive-coupled signal detection *No bare-wire connections
Detectable cablesAVS/AVSS-compliant cables, External diameter: 1.2 mm (0.05 in) to 2.0 mm (0.08 in)
Number of channels2 (SP7100)
Compatible communications speedsSP7001, SP7002: CAN 125 kbit/s to 1 Mbit/s
SP7001: CAN FD 125 kbit/s to 3 Mbit/s
Total delay time130 ns (typical)
CAN terminal resistance60 Ω (typical), built-in
Signal output connectorD-sub 9-pin female (CH1, CH2)
Operating temperature, humidityTemperature: -40 °C to 85 °C (-40 °F to 185 °F)
Humidity: -40 °C to 60 °C (-40 °F to 140 °F), 80% RH or less (with no condensation), 60 °C to 85 °C (140 °F to 185 °F), 60% RH or less (with no condensation)
Power supply(1) AC Adapter Z1008 (100 V to 240 V AC), rated power: 8 VA (including AC adapter)
(2) External power supply (10 V to 30 V DC), rated power: 3 VA
Dimensions and massSP7001, SP7002: 44 mm (1.73 in) W × 85 mm (3.35 in) H × 20 mm (0.79 in) D, 180 g (6.3 oz), Cable length: 2.5 m (8.20 ft)
SP7100: 55 mm (2.17 in) W × 120 mm (4.72 in) H × 25 mm (0.98 in) D, 130 g (4.6 oz), Cable length: 0.3 m (0.98 ft)
SP9200: Probe: φ 11.6 mm (0.46 in) × 33.7 mm (1.33 in) H, Guard hook: φ 5 mm (0.20 in) × 11.8 mm (0.46 in) H, 26 g, Cable length: 0.5 m (1.64 ft)
Included Accessories (SP7001, SP7002)Quick stard manual (Japanese and English) ×1 each, Operating precautions ×1
Accessories (SP7100)Quick stard manual (Japanese and English) ×1 each, Operating precautions ×1, Spiral tube ×1, Power cable L9500 ×1, Alligator clip ×1, Ground connection cable ×1

ACCESSORIES



SIGNAL PROBE SP9200
- Signal Probe for the SP7000 series, 2-piece set



CAN INTERFACE SP7100
- Interface  for the Non-Contact 
- CAN Sensor SP7001 / SP7002 to the CAN analysis system



CAN INTERFACE SP7001
- Non-contact CAN sensor. Sensor box only, supports 
- CAN FD / CAN signals



NON-CONTACT CAN SENSOR SP7002
- Non-contact CAN sensor. Sensor box only, supports CAN signals



AC ADAPTER Z1008
- AC Adapter. 100 to 240V AC



POWER CABLE L9500
- Power Cable. 2.1 mm (0.08 in) inside diameter, 5.5 mm (0.22 in) outside diameter, standard DC plug



SPLIT CABLE SP9900
- Split Cable. For CH1, CH2 output branch



CARRYING CASE C1013
- Hard Carrying Case, 2CH can be stored

OPTIONS


SP7002-90
- Supports CAN signals, SP7002, SP7100, SP9200 set

Ratings & Reviews

No reviews available

Be the first to Write a Review