Non-Contact CAN Sensor SP7002-90
The SP7001 and SP7002 are CAN and CAN FD signal sensors that use non-contact technology to accurately capture CAN bus signals necessary for vehicle and next generation equipment evaluation and development. Improve testing productivity and efficiency by eliminating the need to peel away cable insulation or use a sub-harness that is traditionally required to obtain signals.
Key Features
- Acquire CAN data immediately, simply by hooking probes to the cables
- Eliminate concerns by using non-contact sensing technology
- Use in a diverse array of development and evaluation applications that demand reliability
Product Warranty Period: 3 years
Included Accessories:
Quick stard manual (Japanese and English) ×1 each, Operating precautions ×1, Spiral tube ×1, Power cable L9500 ×1, Alligator clip ×1, Ground connection cable ×1
Key Features
- Acquire CAN data immediately, simply by hooking probes to the cables
- Eliminate concerns by using non-contact sensing technology
- Use in a diverse array of development and evaluation applications that demand reliability
Product Warranty Period: 3 years
Included Accessories:
Quick stard manual (Japanese and English) ×1 each, Operating precautions ×1, Spiral tube ×1, Power cable L9500 ×1, Alligator clip ×1, Ground connection cable ×1
Detection method | Capacitive-coupled signal detection *No bare-wire connections |
---|---|
Detectable cables | AVS/AVSS-compliant cables, External diameter: 1.2 mm (0.05 in) to 2.0 mm (0.08 in) |
Number of channels | 2 (SP7100) |
Compatible communications speeds | SP7001, SP7002: CAN 125 kbit/s to 1 Mbit/s SP7001: CAN FD 125 kbit/s to 3 Mbit/s |
Total delay time | 130 ns (typical) |
CAN terminal resistance | 60 Ω (typical), built-in |
Signal output connector | D-sub 9-pin female (CH1, CH2) |
Operating temperature, humidity | Temperature: -40 °C to 85 °C (-40 °F to 185 °F) Humidity: -40 °C to 60 °C (-40 °F to 140 °F), 80% RH or less (with no condensation), 60 °C to 85 °C (140 °F to 185 °F), 60% RH or less (with no condensation) |
Power supply | (1) AC Adapter Z1008 (100 V to 240 V AC), rated power: 8 VA (including AC adapter) (2) External power supply (10 V to 30 V DC), rated power: 3 VA |
Dimensions and mass | SP7001, SP7002: 44 mm (1.73 in) W × 85 mm (3.35 in) H × 20 mm (0.79 in) D, 180 g (6.3 oz), Cable length: 2.5 m (8.20 ft) SP7100: 55 mm (2.17 in) W × 120 mm (4.72 in) H × 25 mm (0.98 in) D, 130 g (4.6 oz), Cable length: 0.3 m (0.98 ft) SP9200: Probe: φ 11.6 mm (0.46 in) × 33.7 mm (1.33 in) H, Guard hook: φ 5 mm (0.20 in) × 11.8 mm (0.46 in) H, 26 g, Cable length: 0.5 m (1.64 ft) |
Included Accessories (SP7001, SP7002) | Quick stard manual (Japanese and English) ×1 each, Operating precautions ×1 |
Accessories (SP7100) | Quick stard manual (Japanese and English) ×1 each, Operating precautions ×1, Spiral tube ×1, Power cable L9500 ×1, Alligator clip ×1, Ground connection cable ×1 |
ACCESSORIES
SIGNAL PROBE SP9200
- Signal Probe for the SP7000 series, 2-piece set
CAN INTERFACE SP7100
- Interface for the Non-Contact
- CAN Sensor SP7001 / SP7002 to the CAN analysis system
CAN INTERFACE SP7001
- Non-contact CAN sensor. Sensor box only, supports
- CAN FD / CAN signals
NON-CONTACT CAN SENSOR SP7002
- Non-contact CAN sensor. Sensor box only, supports CAN signals
AC ADAPTER Z1008
- AC Adapter. 100 to 240V AC
POWER CABLE L9500
- Power Cable. 2.1 mm (0.08 in) inside diameter, 5.5 mm (0.22 in) outside diameter, standard DC plug
SPLIT CABLE SP9900
- Split Cable. For CH1, CH2 output branch
CARRYING CASE C1013
- Hard Carrying Case, 2CH can be stored
DOWNLOADS
Catalog
- NON-CONTACT CAN SENSOR SP7001, SP7002
User Guide
- The SP7001/SP7002: Causes of “Output Bus Error Detection
Manual
- NON-CONTACT CAN SENSOR SP7001,SP7002 CAN INTERFACE SP7100 SIGNAL PROBE SP9200
Declaration of Conformity
- NON-CONTACT CAN SENSOR SP7001,SP7002 CAN INTERFACE SP7100