Power Quality Analyzer PQ3100
Hioki portable power meters and analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The PQ3100 is a comprehensive but easy-to-use power quality analyzer for monitoring and recording power supply anomalies, allowing their causes to be quickly investigated, and also for assessing power supply problems such as voltage drops, flicker, harmonics, and other electrical issues.
Key Features
- Record data including voltage, current, power, harmonics, and flicker simultaneously along a single time axis
- Measure up to 6000 A AC
- Capture all power anomalies, including instantaneous outages, voltage drops, and frequency fluctuations, while simultaneously recording trend data
- Quick Set: Easy-to-understand on-screen guide for measurement procedures
- Bundled PQ ONE application software makes it easy to create reports
- Record waveforms for up to 1 second before and 10 seconds after an anomaly occurs
- Accurately measure DC currents over extended periods of time (with an AC/DC auto-zero current sensor)
- Directly supply power to connected current sensors
- Send measured values to HIOKI data loggers using a Bluetooth wireless technology compatible adapter (LR8410 Link-compatible products), Ver. 2.0 and later
Included Accessories: Instruction manual ×1, Measurement guide ×1, Voltage cord L1000-05 ×1 set (Red/Yellow/Blue/Gray/Black, Alligator clip ×5, Spiral tube ×5), Color spiral tube (for identifying clamp sensor color) ×1 set, Spiral tube ×5, AC adapter Z1002 ×1, Strap ×1, USB cable (1 m 3.28 ft length) ×1, Battery pack Z1003 ×1, PQ ONE (software, CD) ×1
Product Warranty Period: 3 years
Measurement line type | Single-phase 2-wire, Single-phase 3-wire, Three-phase 3-wire or Three-phase 4-wire plus one extra input channel CH4 for voltage/current, (all channels AC/DC measurement) |
---|---|
Voltage ranges | Voltage measurement: 1000.0 V rms or DC, Transient measurement 2.200 kV peak |
Current ranges | 50.000 mA AC to 5.0000 kA AC, 10.000 A DC to 2.0000 kA DC (depends on current sensor in use) |
Power ranges | 50.000 W to 6.0000 MW (determined automatically based on current range in use) |
Basic accuracy | Voltage: ±0.2% of nominal voltage, Current: ±0.1 % rdg. ±0.1 % f.s. + current sensor accuracy, Active power: DC ±0.5 % rdg. ±0.5 % f.s. + current sensor accuracy, AC ±0.2 % rdg. ±0.1 % f.s. + current sensor accuracy |
Measurement items | 1. Transient over voltage : 200 kHz sampling 2. Frequency cycle : Calculated as one cycle 3. Voltage (1/2) RMS, Current (1/2) RMS: one cycle calculation refreshed every half cycle 4. Voltage swell, Voltage dips, Voltage interruption, RVC (Ver.2.0 or later) : Voltage (1/2) RMS calculation 5. Inrush current : half-cycle calculation: Calculated as the current RMS value for current waveform data sampled every half-cycle. 6. Frequency 200 ms: Calculated as 10 or 12 cycles 7. 10-sec frequency: Calculated as the whole-cycle time during the specified 10 s period 8. Voltage waveform peak, Current waveform peak 9. Voltage, Current, Active power, Apparent power, Reactive power, Active energy, Apparent energy, Reactive energy, Energy cost, Power factor, Displacement power factor, Voltage unbalance factor, Current unbalance factor 10. Voltage crest factor, Current crest factor 11. Harmonic/ Harmonic phase angle (voltage/ current), Harmonic power: 0 th to 50 th orders 12. Harmonic voltage-current phase angle: 1 th to 50 th orders 13. Total harmonic distortion factor (voltage/ current) 14. Inter harmonic (voltage/ current): 0.5 th to 49.5 th orders 15. K Factor (multiplication factor) 16. IEC Flicker, Δ V10 Flicker |
Record | Maximum recording interval: 1 year, Maximum number of recordable events: 9999 × 365 days |
Interfaces | SD/SDHC memory card, RS-232C (for communication/ LR8410 link), LAN (HTTP server/ FTP/ Send e-mail), USB 2.0 (for communication) |
Logger connectivity | Sends measured values wirelessly to logger by using a Bluetooth® wireless technology serial conversion adapter. (Supported devices: Hioki LR8410 Link-compatible loggers), Ver. 2.0 and later |
Display | 6.5-inch TFT color LCD (640 × 480 dots) |
Power supply | AC adapter Z1002 (100 V to 240 V AC, 50/60 Hz, rated current 1.7 A), Battery pack Z1003 (Continuous use: 8 hr, Charging time: Max. 5 hr 30 m with AC adapter) |
Dimensions and mass | 300 mm (11.81 in)W × 211 mm (8.31 in)H × 68 mm (2.68 in)D, 2.5 kg (88.2 oz) (including battery pack) |
Included Accessories | Instruction manual ×1, Measurement guide ×1, Voltage cord L1000-05 ×1 set (Red/Yellow/Blue/Gray/Black, Alligator clip ×5, Spiral tube ×5), Color clip (for identifying clamp sensor color) ×1 set, Spiral tube ×5, AC adapter Z1002 ×1, Strap ×1, USB cable (1 m 3.28 ft length) ×1, Battery pack Z1003 ×1, PQ ONE (software, CD) ×1 |
ACCESSORIES
AC CURRENT SENSOR CT7126
- 60 A AC, φ 15 mm (0.59 in), 2.5 m (8.20 ft) cord length
AC CURRENT SENSOR CT7131
- 100 A AC, φ 15 mm (0.59 in), 2.5 m (8.20 ft) cord length
AC CURRENT SENSOR CT7136
- 600 A AC, φ 46 mm (1.81 in), 2.5 m (8.20 ft) cord length
AC LEAKAGE CURRENT SENSOR CT7116
- 6 A AC, φ 40 mm (1.57 in), 2.5 m (8.20 ft) cord length
AC/DC AUTO-ZERO CURRENT SENSOR CT7731
- DC to 5 kHz, ±1.0% accuracy
- Rated 100A AC/DC
AC/DC AUTO-ZERO CURRENT SENSOR CT7736
- DC to 5 kHz, ±2.0% accuracy
- Rated 600A AC/DC
AC/DC AUTO-ZERO CURRENT SENSOR CT7742
- DC to 5 kHz, ±1.5% accuracy
- Rated 2000A AC/DC
EXTENSION CABLE L0220-01
- 2 m (6.56 ft) length
EXTENSION CABLE L0220-02
- 5 m (16.41 ft) length
EXTENSION CABLE L0220-03
- 10 m (32.81 ft) length
SD MEMORY CARD 2GB Z4001
- 2 GB capacity
SD MEMORY CARD Z4003
- 8 GB capacity
GRABBER CLIP 9243
- Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length
MAGNETIC ADAPTER 9804-01
- Attaches to the tip of cord, red ×1, φ11 mm (0.43 in)
MAGNETIC ADAPTER 9804-02
- Attaches to the tip of cord, black ×1, φ11 mm (0.43 in)
BATTERY PACK Z1003
- NiMH, Charges while installed in the main unit
MAGNETIC STRAP Z5020
- Heavy-Duty Magnetic Strap
MAGNETIC STRAP Z5004
- Strap with magnet
AC CURRENT SENSOR CT7126
- 60 A AC, φ 15 mm (0.59 in), 2.5 m (8.20 ft) cord length
AC CURRENT SENSOR CT7131
- 100 A AC, φ 15 mm (0.59 in), 2.5 m (8.20 ft) cord length
AC CURRENT SENSOR CT7136
- 600 A AC, φ 46 mm (1.81 in), 2.5 m (8.20 ft) cord length
AC LEAKAGE CURRENT SENSOR CT7116
- 6 A AC, φ 40 mm (1.57 in), 2.5 m (8.20 ft) cord length
AC/DC AUTO-ZERO CURRENT SENSOR CT7731
- DC to 5 kHz, ±1.0% accuracy
- Rated 100A AC/DC
AC/DC AUTO-ZERO CURRENT SENSOR CT7736
- DC to 5 kHz, ±2.0% accuracy
- Rated 600A AC/DC
AC/DC AUTO-ZERO CURRENT SENSOR CT7742
- DC to 5 kHz, ±1.5% accuracy
- Rated 2000A AC/DC
EXTENSION CABLE L0220-01
- 2 m (6.56 ft) length
EXTENSION CABLE L0220-02
- 5 m (16.41 ft) length
EXTENSION CABLE L0220-03
- 10 m (32.81 ft) length
SD MEMORY CARD 2GB Z4001
- 2 GB capacity
SD MEMORY CARD Z4003
- 8 GB capacity
GRABBER CLIP 9243
- Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length
MAGNETIC ADAPTER 9804-01
- Attaches to the tip of cord, red ×1, φ11 mm (0.43 in)
MAGNETIC ADAPTER 9804-02
- Attaches to the tip of cord, black ×1, φ11 mm (0.43 in)
BATTERY PACK Z1003
- NiMH, Charges while installed in the main unit
MAGNETIC STRAP Z5020
- Heavy-Duty Magnetic Strap
MAGNETIC STRAP Z5004
- Strap with magnet
DOWNLOADS
Catalog
- POWER QUALITY ANALYZER PQ3198, PQ3100
Manual
- POWER QUALITY ANALYZER PQ3100
Declaration of Conformity
- POWER QUALITY ANALYZER PQ3198, PQ3100
Catalog
- POWER QUALITY ANALYZER PQ3198, PQ3100
Manual
- POWER QUALITY ANALYZER PQ3100
Declaration of Conformity
- POWER QUALITY ANALYZER PQ3198, PQ3100
Ratings & Reviews
1 review
1/25/2021 2:06 pm
An easy and effective PQM to use!
Brendan Milliken -
Have used for multiple 1MW UPS battery discharges so far (monitoring DC output) in conjunction with the CT7742 clamp. So far so good.
If you want the ease of use of the PQ3198 but have a tighter budget, the PQ3100 offers a lot of the same benefits, and at a less painful price. Hoping to buy more of these for our company going forward.