Resistance HiTester (with Built-in GP-IB) RM3542-01

(0) No Reviews yet
$3,817.00
SKU: RM3542-01
Ships in approximately 20 days if not in stock.

Contact for Lead Time

Built in GP-IB interface

Hioki DC resistance meters measure a broad range of resistance values at a high level of precision. The RM3542 deliver high speed, high precision, and high reliability, indispensable for the shipping inspection of devices such as resistors and EMI components. The resistance meter also supports chip resistor sampling inspections, helping resistor manufacturers improve productivity.


Key Features
- High speed and accuracy maximize productivity in automated systems
- Multiple checking functions ensure proper contact for reliable measurements
- Low-power resistance mode measures chip inductors and EMC suppression components
- Supports sample inspections during the manufacturing process

Product Warranty Period: 3 years

Included Accessories:
Power cord ×1, EXT. I/O male connector ×1, Instruction manual ×1, Operation guide ×1
Resistance range[at Low Power OFF] 100 mΩ range (Max. 120.0000 mΩ, 0.1 μΩ resolution) to 100 MΩ range (Max. 120.0000 MΩ, 100 Ω resolution), 10 steps
[at Low Power ON] 1000 mΩ range (Max. 1200.000 mΩ, 1 μΩ resolution) to 1000 Ω range (Max. 1200.000 Ω, 1 mΩ resolution), 4 steps
DisplayMonochrome graphic LCD 240 × 64 dot, white LED backlight
Measurement accuracy[with SLOW mode, at 100 mΩ range] ±0.015 % rdg. ±0.002 % f.s.
[with SLOW mode, at 1000 Ω range] ±0.006 % rdg. ±0.001 % f.s. (the best case)
Testing current[at 100 mΩ range] 100 mA DC to [at 100 MΩ range] 100 nA DC
Open-terminal voltage20 V DC max.
Sampling rateFAST, MEDIUM, SLOW, 3 settings
Measurement times[at 100 Ω /1000 Ω ranges, with Low Power OFF]
FAST: 0.9 ms, MED: 3.6 ms, SLOW: 17 ms (minimum time)
Integration time0.1 ms to 100.0 ms, or 1 to 5 PLC at 50 Hz, 1 to 6 PLC at 60 Hz
Note: PLC = one power line cycle (mains wave-form period)
Other functionsComparator (compare setting value with measurement value), Delay (set to allow for mechanical delay of trigger input and probing, or set to allow for measurement object response), OVC (offset voltage compensation), Measurement fault detection, Probe short-circuit detection, Improve contact, Auto-memory, Statistical calculations, Settings monitor (when using two instruments, a difference in settings causes warning notification), Retry, Trigger function. etc,.
InterfacesRS-232C, Printer, GP-IB (Model RM3542-01)
External I/OTrigger, Hold input, Comparator output, Settings monitor terminal
Power supply100 to 240 V AC, 50/60 Hz, 30 VA max.
Dimensions and mass260 mm (10.24 in) W × 88 mm (3.46 in) H × 300 mm (11.81 in) D, 2.9 kg (102.3 oz)
Included AccessoriesPower cord ×1, EXT. I/O male connector ×1, Instruction manual ×1, Operation guide ×1

ACCESSORIES



GP-IB CONNECTOR CABLE 9151-02
- 2 m (6.56 ft) length



RS-232C CABLE 9637
- For the PC, 9 pin - 9 pin, cross, 1.8 m (5.91 ft) length



TEST FIXTURE 9262
- Direct connection type, DC to 8 MHz, measurable conductor diameter: ø0.3 (0.01 in) to 2 mm (0.08 in)



SMD TEST FIXTURE 9263
- Direct connection type, DC to 8 MHz, Test sample dimensions:1 mm (0.04 in) to 10 mm (0.39 in)



4-TERMINAL PROBE 9140
- DC to 100 kHz, 1 m (3.28 ft) length, impedance characteristics of 75 Ω

OPTIONS


RM3542

Ratings & Reviews

No reviews available

Be the first to Write a Review