SWITCH MAINFRAME SW1002

(0) No Reviews yet
$3,240.00
SKU: SW1002
Ships in approximately 20 days if not in stock.

Indent Basis Only

The SW1002 is a switch mainframe for housing the SW9001 or SW9002 Multiplexer Module to deliver quick, multi-channel battery testing. Connect up to 2 battery testing instruments to test OCV measurement, internal resistance measurement, and external potential measurement of battery cells.

Key Features
- Switch between voltmeter and battery tester while testing
- SW1002: max. 264 channels (2-wire) to max. 72 channels (4-terminal pair)
- Circuit-design-friendly for impedance measurements that minimize errors between channels (Effect: 0.01% f.s.*)
- For BT4560 100 mΩ range, R measurements, and a measurement frequency of 1 kHz
- For OCV measurement, internal resistance measurement, and external potential measurement of battery cells
- Measure battery modules up to 60 V DC

Product Warranty Period: 3 years

Included Accessories
Power cord ×1, instruction manual ×1, usage precautions ×1, USB driver CD ×1
Slots12 slots
Supported modulesMULTIPLEXER MODULE SW9001 (2-wire/4-wire)
MULTIPLEXER MODULE SW9002 (4-terminal pair)
Connectible instrumentsMax. 2 units
2-wire × 1 + 4-wire × 1, or 2-wire × 1 + 4-terminal pair × 1
Max. input voltage60 V DC (Cannot connect to battery packs in excess of 60 V DC), 30 V AC rms, 42.4 V peak, Maximum rated voltage to ground: 60 V DC
Communication I/FLAN, USB, RS-232C (for host, for measurement instruments)
FunctionsChannel switching, wiring method, scan function, communication command transmission, channel delay, shield switching
Power supply100 to 240 V AC / 30 VA (50/60 Hz)
Dimensions and mass430 mm (16.93 in) W × 132 mm (5.20 in) H × 420 mm (16.54 in) D, 6.0 kg (211.6 oz)
AccessoriesPower cord ×1, instruction manual ×1, usage precautions ×1, USB driver CD ×1
ACCESSORIES



MULTIPLEXER MODULE SW9001
- 2-wire (22 channels) or 4-wire (11 channels)



MULTIPLEXER MODULE SW9002
- 4-terminal pair (6 channels)



CONNECTION CABLE SET L4930
- 1.2 m (3.94 ft) length, CAT IV 600 V, CAT III 1000 V



CONNECTION CABLE L2108
- 4-Terminal banana, 0.84 m (2.76 ft) length



CONNECTION CABLE L2004
- BNC, 0.91 m (2.99 ft) length



RS-232C CABLE 9637
- 9 pin - 9 pin, cross, 1.8 m (5.91 ft) length



LAN CABLE 9642
- Straight Ethernet cable, supplied with straight to cross conversion adapter, 5 m (16.41 ft) length



USB CABLE (A-B) L1002
- 1m long
DOWNLOADS

Catalog
SWITCH MAINFRAME SW1001, SW1002

Declaration of Conformity
SWITCH MAINFRAME SW1001,SW1002

Ratings & Reviews

No reviews available

Be the first to Write a Review