VIR Generator Unit (For MR8740-50) U8794
Key Features
- As an inspection device of the ECU, it is ideal for generating simulation signals of various sensors, inspection of electronic parts, equipment maintenance
- DC voltage, DC current, and resistance simulation output
- In resistance generation, the voltage to be connected is
measured, the output current is calculated from the set resistance value, and simulated output
- Used in combination with Memory HiCorder series MR8740T (not available in other models)
- Isolation between each output channel and between channel and chassis
Product Warranty Period: 3 years
- As an inspection device of the ECU, it is ideal for generating simulation signals of various sensors, inspection of electronic parts, equipment maintenance
- DC voltage, DC current, and resistance simulation output
- In resistance generation, the voltage to be connected is
measured, the output current is calculated from the set resistance value, and simulated output
- Used in combination with Memory HiCorder series MR8740T (not available in other models)
- Isolation between each output channel and between channel and chassis
Product Warranty Period: 3 years
| Output terminal | Number of channels: 2, SMB terminal (Output impedance: 1 Ω or less) Max. rated voltage to ground: 33 V rms AC or 70 V DC |
|---|---|
| Output voltage range | -10 V to 15 V (Amplitude setting range: 0 V to 20 V p-p, Setting resolution: 1 mV) |
| Max. output current | 10 mA (Allowable load resistance: 1.5 kΩ or more) |
| Function generator | DC, Sine wave, Square wave, Pulse wave, Triangular wave, Ramp wave, Output frequency: 0 Hz to 100 kHz |
| Arbitrary waveform generator mode | Waveforms measured by MR8847A, etc., generated by Hioki Model 7075, PW3198, or SF8000, CSV waveforms D/A refresh rate: 2 MHz (using 16-bit D/A) |
| Sweep function | Frequency, Amplitude, Offset, Duty (Pulse only) |
| Program function | Max. 128 steps (Number of loops for each step, Number of total loops) |
| Other | Self-test function (Voltage), External input/output control |
| Dimensions and mass | 106 mm (4.17 in) W × 19.8 mm (0.78 in) H × 196.5 mm (7.74 in) D, 250 g (8.8 oz) |
| Accessories | None |
ACCESSORIES
CONNECTION CABLE L9795-01
- Max. rated voltage to earth: 33 Vrms AC or 70 V DC, SMB to alligator clip, 1.5 m (4.92 ft) length
CONNECTION CABLE L9795-02
- Max. rated voltage to earth: 33 Vrms AC or 70 V DC, SMB to BNC terminal, 1.5 m (4.92 ft) length
CONNECTION CABLE L9795-01
- Max. rated voltage to earth: 33 Vrms AC or 70 V DC, SMB to alligator clip, 1.5 m (4.92 ft) length
CONNECTION CABLE L9795-02
- Max. rated voltage to earth: 33 Vrms AC or 70 V DC, SMB to BNC terminal, 1.5 m (4.92 ft) length