Power Analyzer PW8001-01

(0) No Reviews yet
$9,900.00
SKU: PW8001-01

Contact for Lead Time

Input modules, voltage cords, and current sensors are sold separately.

The PW8001 sets a new benchmark for complete power analysis solutions with Hioki being the only manufacturer that offers industry-leading power analyzers and a wide portfolio of high-accuracy current sensors both developed and manufactured by Hioki. This enables to align their performance and results in more accurate and stable measurements from DC to high frequencies and low power factor measurements thanks to functions like the automatic phase shift correction.

Upcoming industry challenges are anticipated with the ability to measure even large currents at voltages up to 1500 V, 15 MS/s sampling rate and multi-channel measurement target applications using SiC/GaN semiconductors from automobile electrification, smart grids and reactors to renewable energy supply sources.

Key features
- World-class measurement accuracy: Basic accuracy ±0.03%, DC accuracy ±0.05%, 50 kHz accuracy 0.2% (*1)
- Accurate capture of power fluctuations caused by high-speed switching: Sampling performance 18-bit, 15 MHz, Noise Resistance (CMRR) 110 dB, 100 kHz (*1)
- Up to 8 power channels optimizing your measurement: 8-channel power measurement
- Accurately measure high-frequency, low-power-factor power: Current sensor automatic phase correction function (*2)
- Simultaneous analysis of 4 motors: 4-motor/2-motor simultaneous analysis function
- Integration of measurement data into CAN networks: CAN or CAN FD output function
- Safe evaluation of increasingly high-voltage solar inverters: 1500 V DC CAT II / 1000 V DC CAT III (*3)

*1:When using the 15MS/S Input Unit U7005
*2:When used with a current sensor with automatic phase correction functionality
*3:When using the 2.5MS/S Input Unit U7001

Included accessories
- Power cord x 1
- Instruction manual x 1
- GENNECT One (PC applications) CD x 1

ACCURACY GUARANTEED: 6 MONTHS, ACCURACY GUARANTEE PERIOD AFTER ADJUSTMENT MADE BY HIOKI: 6 MONTHS

Measurement lines1-phase-2-wire, 1-phase-3-wire, 3-phase-3-wire, 3-phase-4-wire
No. of PW8001 input unitsMax. 8 units (mix and match)
Type of input unitU7001 2.5 MS/s INPUT UNIT
U7005 15 MS/s INPUT UNIT
Measurement frequency bandU7001: DC, 0.1 Hz to 1 MHz
U7005: DC, 0.1 Hz to 5 MHz
SamplingU7001: 2.5 MHz, 16-bit
U7005: 15 MHz, 18-bit
Data update rate10 ms, 50 ms, 200 ms
Accuracy for power (U7001)50/60 Hz: 0.02% of reading + 0.05% of range
DC: 0.02% of reading + 0.05% of range
50 kHz : 0.4% of reading + 0.1% of range
Accuracy for power (U7005)50/60 Hz : 0.01% of reading + 0.02% of range
DC : 0.02% + 0.03% of reading of range
50 kHz: 0.15% of reading + 0.05% of range
Measurement rangeVoltage: 6 V, 15 V, 30 V, 60 V, 150 V, 300 V, 600 V, 1500 V
Current: (probe1) 100 mA to 2 kA, (probe2) 100 mA to 50 kA
(Range configuration changes depending on the current sensor used, U7001 only for Probe2.)
Measurement parametersvoltage (U), current (I), active power (P), apparent power (S), reactive power(Q), power factor (λ), phase angle (φ), voltage frequency(fU), current frequency(fI), efficiency (η), loss (Loss), voltage ripple factor (Urf), current ripple factor (Irf), current integration (Ih), power integration (WP), voltage peak (Upk), current peak (Ipk)

- Harmonics measurement: maximum analysis order 500th
- Waveform recording: recording capacity 5M words × ( [voltage/current] ) × - No. of channels + motor waveforms)
- Motor analysis (option): voltage, torque, RPM, frequency, slip, motor power
- FFT analysis*
- Flicker measurement*

Calculation functionEfficiency and loss calculations, User-defined calculations*, Delta conversion, Current sensor automatic phase shift calculation
External interfaceUSB flash drive, LAN, GP-IB, RS-232C, external control, optical link*, BNC sync.*, CAN or CAN FD*
Power supply100 V to 240 V AC, 50/60 Hz, 230 VA
Dimensions and massApprox. 430 mm (16.93 in) W × 221 mm (8.70 in) H × 361mm (14.21 in) D, Approx. 14kg (493.84 oz)
Accessories- Power cord ×1
- Instruction manual ×1
- GENNECT One (PC applications) CD ×1
- D-sub 25-pin connector ×1 (PW8001-02, -05, -12, -15 only)
  • *To be supported in Ver. 2.00

ACCESSORIES

Connection Options




CONNECTION CORD L9217
- For motor analysis input
- Cord has insulated BNC connectors at both ends, 1.6 m (5.25 ft) length


 

CONNECTION CABLE 9444
- 9 pin - 9 pin straight, 1.5 m (4.92 ft) length

 


OPTICAL CONNECTION CABLE L6000
50/125 μm wavelength multimode fiber, 10 m (32.81 ft) length

Direct Current Input
* To connect to the HIOKI ME15W (12 pin) terminal




AC/DC CURRENT BOX PW9100
- ±0.04% power accuracy in combination with PW6001
- Direct input
- Test power conversion efficiency of motors, inverters, HEV, and renewable energy equipment

Factory installed options
 


2.5MS/S INPUT UNIT U7001
- Factory-installed option
- Basic accuracy for 50/60 Hz: Power ± 0.07%
- Sampling frequency: 2.5 MHz
- ADC resolution: 16-bit
- Measurement frequency band: DC, 0.1 Hz to 1 MHz
- Maximum input voltage: 1000 V AC, 1500 V DC, ±2000 V peak
- Maximum rated line-to-ground voltage: 600 V AC/1000 V DC CAT III, 1000 V AC/1500 V DC CAT II

Factory-installed option
Note: Customers who have purchased the Impedance Analyzer IM3570 can add the Equivalent Circuit Analysis Firmware IM9000 function. Please contact your local HIOKI representative.




15MS/S INPUT UNIT U7005
- Factory-installed option
- Basic accuracy for 50/60 Hz: Power ± 0.03%
- Sampling frequency: 15 MHz
- ADC resolution: 18-bit
- Measurement frequency band: DC, 0.1 Hz to 5 MHz
- Maximum input voltage: 1000 V AC, 1000 V DC, ±2000 V peak
- Maximum rated line-to-ground voltage: 600 V CAT III, 1000 V CAT II


High precision current measurement
Up to 200 A (High precision) *ME15W (12-pin) terminal type * Direct connection with U8977

 


AC/DC CURRENT PROBE CT6841-05
- DC to 1MHz (Phase: up to 300kHz)
- Rated 20A AC/DC
- φ 20 mm (0.79 in) core dia.

 


AC/DC CURRENT PROBE CT6843-05
- DC to 500kHz (Phase: up to 300kHz)
- Rated 200A AC/DC
- φ 20 mm (0.79 in) core dia.




CLAMP ON SENSOR 9272-05
- 1Hz to 100kHz (Phase: 5Hz to 50kHz)
- Rated 20A/200A AC/DC
- φ 46 mm (1.81 in) core dia.

 


AC/DC CURRENT SENSOR CT6863-05
- DC to 500kHz (Phase: up to 300kHz)
- Rated 200A AC/DC
- φ 24 mm (0.94 in) core dia.

 


AC/DC CURRENT SENSOR CT6862-05
- DC to 1MHz (Phase: up to 300kHz)
- Rated 50A AC/DC
- φ 24 mm (0.94 in) core dia.

Input cable (F)
* Voltage input via banana terminals limited by the voltage specifications of the respective input unit.

 


ALLIGATOR CLIP SET L4935
- Attaches to the tip of the banana plug cable, CAT IV 600V, CAT III 1000V

 


CONNECTION CABLE SET L4940
- Banana plug, 1.5 m (4.92 ft) length, red/black each 1


Input cables




GRABBER CLIP L9243 (185mm)
- Attaches to the tip of the banana plug cable, Red/Black: 1 each, 185 mm (7.28 in.) length

Input/Output cords
Note: Effect of cable parasitic component
Response waveform changes according to cable length. For consultation on special order products with cable capacity within a certain range, please contact your Hioki distributor.

 


CONNECTION CORD L9257
- 1.2 m (3.94 ft) length


Interface Cables




RS-232C CABLE 9637
- 9 pin - 9 pin, cross, 1.8 m (5.91 ft) length

 

LAN CABLE 9642
- Straight Ethernet cable, supplied with straight to cross conversion adapter, 5 m (16.41 ft) length

Other options for Input
 



CONNECTION CORD L9217
- Cord has insulated BNC connectors at both ends, 1.6 m (5.25 ft) length

 


CONNECTION CORD 9165
- Cord has metallic BNC connectors at both ends, use at metallic terminal, 1.5 m (4.92 ft) length

 


CAN CABLE 9713-01
- For the MR8904(MR8875), 8910, Unprocessed on one end, 1.8 m (5.91 ft) length


PC communication
*The 9151-02 is only for the RM3545-01

 


GP-IB CONNECTOR CABLE 9151-02
- 2 m (6.56 ft) length


PL23 (10 pin) - ME15W (12 pin) conversion
*When using a 10-pin sensor without “-05” in the model number, Conversion Cable CT9900 must be used to connect to 12-pin terminal.

 


CONVERSION CABLE CT9900
- Convert PL23 (10-pin) terminal to ME15W (12-pin) terminal


Power supply
*AC adapter is bundled with the LR8410-20, LR8510/8511, LR8450, LR8450-01

 


AC ADAPTER Z1002
- For main unit, 100 to 240 V AC


POWER SUPPLY for Current Sensors
*A separate power supply (CT955x) is required in order to use a high-precision current sensor.

 


SENSOR UNIT CT9557
- Power supply for current sensors when used alone 
- 4ch, with Waveform/Total Waveform/Total RMS output


Up to 1000 A (High precision)
*A separate power supply (CT955x) is required in order to use a high-precision current sensor. *Only sensors with ME15W (12-pin) terminals (-05 type) can be connected to the CT955x. *The separately available CONVERSION CABLE CT9900 is required in order to use a sensor with a PL23 (10-pin) terminal.

 


AC/DC CURRENT SENSOR CT6876
- DC to 1.5MHz (Phase: up to 1MHz)
- Rated 1000A AC/DC
- φ 36 mm (1.42 in) core dia.

 


AC/DC CURRENT PROBE CT6846-05
- DC to 20kHz (Phase: up to 20kHz)
- Rated 1000A AC/DC
- φ 50 mm (1.79 in) core dia.


Up to 200 A (High precision)
* To connect to the Probe1 input terminal (HIOKI ME15W terminal)

 


AC/DC CURRENT PROBE CT6846-05
- DC to 20kHz (Phase: up to 20kHz)
- Rated 1000A AC/DC
- φ 50 mm (1.79 in) core dia.


Up to 2000 A (Curent meter)
*Clamp sensor sold separately

 


AC/DC CURRENT SENSOR CT6876
- DC to 1.5MHz (Phase: up to 1MHz)
- Rated 1000A AC/DC
- φ 36 mm (1.42 in) core dia.

 


AC/DC CURRENT PROBE CT6846-05
- DC to 20kHz (Phase: up to 20kHz)
- Rated 1000A AC/DC
- φ 50 mm (1.79 in) core dia.


Up to 2000 A (High precision)
* To connect to the HIOKI ME15W (12 pin) terminal

 


AC/DC CURRENT SENSOR CT6876
- DC to 1.5MHz (Phase: up to 1MHz)
- Rated 1000A AC/DC
- φ 36 mm (1.42 in) core dia.

 


AC/DC CURRENT SENSOR CT6877
- DC to 1 MHz (Phase: up to 700kHz)
- Rated 2000A AC/DC
- φ 80 mm (3.15 in) core dia.


Up to 4000 A (High precision)
Aggregate and measure large currents in multi-cable circuits Use multiple AC/DC Current Sensor CT6865-05 or AC/DC Current Probe CT6846-05 units with the Sensor Unit CT9557 to measure currents of up to 4000 A in multi-cable circuits. Requires 1 connection cable to connect the PW6001/PW3390 to the CT9557.

 



AC/DC CURRENT SENSOR CT6876
- DC to 1.5MHz (Phase: up to 1MHz)
- Rated 1000A AC/DC
- φ 36 mm (1.42 in) core dia.
 



AC/DC CURRENT PROBE CT6846-05
- DC to 20kHz (Phase: up to 20kHz)
- Rated 1000A AC/DC
- φ 50 mm (1.79 in) core dia.


 

SENSOR UNIT CT9557
- Power supply for current sensors when used alone 
- 4ch, with Waveform/Total Waveform/Total RMS output

 


CONNECTION CABLE CT9904
- ME15W (12 pin) terminal to ME15W (12 pin) terminal, 1 m (3.28 ft) length (for connecting CT9557 total output to PW6001 or PW3390 only)


Up to 500 A (High precision)
* To connect to the HIOKI ME15W (12 pin) terminal

 


AC/DC CURRENT SENSOR CT6875
- DC to 2MHz (Phase: up to 1MHz)
- Rated 500A AC/DC
- φ 36 mm (1.42 in) core dia.

 


AC/DC CURRENT PROBE CT6844-05
- DC to 200kHz (Phase: up to 200kHz)
- Rated 500A AC/DC
- φ 20 mm (0.79 in) core dia.

 


AC/DC CURRENT PROBE CT6845-05
- DC to 100kHz (Phase: up to 100kHz)
- Rated 500A AC/DC
- φ 50 mm (1.97 in) core dia.

 


AC/DC CURRENT SENSOR CT6904
- DC to 4 MHz (Phase: up to 1 MHz)
- Rated 500A AC/DC
- φ 32 mm (1.26 in) core dia.


Voltage Input
*The L1000 is bundled with PQ3198 *Please inquire about voltage cord extension

 


PATCH CORD L1021-01
- Banana branch-banana, Red: 1, Cable length: 0.5 m, For branching from the L9438s or L1000s, CAT IV 600 V, CAT III 1000 V

 


PATCH CORD L1021-02
- Banana branch-banana, Black: 1, Cable length: 0.5 m, For branching from the L9438s or L1000s, CAT IV 600 V, CAT III 1000 V

 


VOLTAGE CORD L9438-50
- 1000 V specifications, Black/ Red, 3 m (9.84 ft) length, Alligator clip ×2

 


VOLTAGE CORD L1000
- 1000 V specifications, Red/ Yellow/ Blue/ Gray each 1, Black 4, Alligator clip ×8, 3m (9.84ft) length


Voltage measurement
*PW9020 ×4 pieces are bundled, additional single sensors also available

 


VOLTAGE CORD L1025
- 1500 V DC CAT II, 1 A, 1000 V CAT III , 1 A, banana - banana (red, black each1), alligator clip, approx. 3 m (9.84 ft) length

OPTIONS



PW8001-02
- D/A output



PW8001-11
- Motor analysis



PW8001-12
- Motor analysis, D/A output

Ratings & Reviews

No reviews available

Be the first to Write a Review