Digital Clamp on Hi-Tester 3280-10F

(0) No Reviews yet
SKU: 3280-10F

This item is IN STOCK

Hioki clamp meters are best-in-class measuring devices incorporating Hioki's expertise in current sensing technology. The 3280-10F is an average rectifying 1000A AC clamp meter that features a broad operating temperature range of -25 degree Celsius to 65 degree Celsius, thin and compact clamp core and optional flexible current sensor that you can attach to let you get into the tightest spots. 

CAT IV 300 V (Current) 
CAT III 600 V (Current) 
CAT III 300 V (Voltage) 
CAT II 600 V (Voltage) 

Key Features 
- Measure the fundamental waveform component using the average rectified method 
- Expanded -25 degree Celsius to 65 degree Celsius operating temperature range 
- Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires 
- Drop proof design withstands drop from a height of 1 meter 

Product Warranty Period: 3 years
AC Current range41.99 to 1000 A, 3 ranges (50 to 60 Hz, Average rectified),
Basic accuracy: ±1.5 % rdg. ±5 dgt.
DC Voltage range419.9 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt.
AC Voltage range4.199 V to 600 V, 4 ranges
(45 to 500 Hz, Average rectified),
Basic accuracy: ±1.8 % rdg. ±7 dgt.
Crest factorN/A
Resistance range419.9 Ω to 41.99 MΩ, 6 ranges, Basic accuracy: ±2 % rdg. ±4 dgt.
Other functionsContinuity: Buzzer sounds at 50 Ω ±40 Ω or less, Data hold, Auto power save, Drop-proof from height of 1 meter
DisplayLCD, max. 4199 dgt., Display refresh rate: 400 ms
Environmental protectionIP40 dustproof and waterproof
Power supplyCoin type lithium battery (CR2032) ×1, Continuous use 120 hours
Core jaw dia.φ 33 mm (1.30 in)
Dimensions and mass57 mm (2.24 in) W × 175 mm (6.89 in) H × 16 mm (0.63 in) D, 100 g (3.5 oz)
AccessoriesCARRYING CASE 9398 ×1, TEST LEAD L9208 ×1, Coin type lithium battery (CR2032) ×1, Instruction manual ×1
ACCESSORIES




TEST LEAD L9208
70 cm (2.30 ft) length



CARRYING CASE 9398




CARRYING CASE C0205
Soft case




CONTACT PIN SET L4933
Attaches to the tip of the Test Lead L9207-10/DT4911, L9206, 60V DC/ 30V AC



SMALL ALLIGATOR CLIP SET L4934
Attaches to the tip of the L4932, L9207-10/DT4911, L9206, CAT III 300 V, CAT II 600 V



TEST LEADS HOLDER 9209
Secures one end of each test lead to the rear of the meter



AC FLEXIBLE CURRENT SENSOR CT6280
- 4200 A AC Large current measurement
- 130 mm (5.12")
OPTIONS

3280-70F
- 3280-10F, CT6280 bundled model

Ratings & Reviews

No reviews available

Be the first to Write a Review