BT3554-51 Pro KIT
To check availability please contact customerservice@hiokiusa.com prior to placing your order.
Hioki portable battery testers support the maintenance of UPS and storage batteries critical to the life support of all businesses. The BT3554-51 battery internal resistance tester sets a new standard for UPS and lead-acid battery diagnostics and enables each test to be done in 2 sec. Proprietary noise reduction technology allows more accurate measurement, even in noisy environments.
The Z3210 wireless adapter adds Bluetooth capability and unlocks a full array of features by a mobile app (GENNECT Cross). The mobile device will provide audio guidance announcing the next battery number to be measured to help prevent erroneous measurements. You can also set up measurement locations information and battery numbers in advance to create profiles to which measurement data and diagnostic results will be linked.
What's in the Kit
- Magnetic Strap Z5020
- Wireless Adapter Z3210
- Pin Type Lead 9465-10
- Carrying Case C1014
- Protector Z5041
- Fuse Set Z5050
- 0 Adj Board
- Neck strap
- USB cable
- Application software CD (GENNECT One)
- 8 x AA alkaline battery (LR6)
- User Manual
Hioki portable battery testers support the maintenance of UPS and storage batteries critical to the life support of all businesses. The BT3554-51 battery internal resistance tester sets a new standard for UPS and lead-acid battery diagnostics and enables each test to be done in 2 sec. Proprietary noise reduction technology allows more accurate measurement, even in noisy environments.
The Z3210 wireless adapter adds Bluetooth capability and unlocks a full array of features by a mobile app (GENNECT Cross). The mobile device will provide audio guidance announcing the next battery number to be measured to help prevent erroneous measurements. You can also set up measurement locations information and battery numbers in advance to create profiles to which measurement data and diagnostic results will be linked.
What's in the Kit
- Magnetic Strap Z5020
- Wireless Adapter Z3210
- Pin Type Lead 9465-10
- Carrying Case C1014
- Protector Z5041
- Fuse Set Z5050
- 0 Adj Board
- Neck strap
- USB cable
- Application software CD (GENNECT One)
- 8 x AA alkaline battery (LR6)
- User Manual
| BT3554-51 Pro Kit | BT3554-52 Pro Kit | ||
| Resistance measurement range | 3 mΩ (max. display 3.100 mΩ, resolution 1 μΩ) to 3 Ω (max. display 3.100 Ω, resolution 1 mΩ), 4 ranges Accuracy: ±0.8 % rdg ±6 dgt (3 mΩ range: ±1.0 % rdg ±8 dgt) Testing source frequency: 1 kHz ±30 Hz With function for avoiding noise frequency enabled: 1 kHz ±80 Hz Testing current: 160 mA (3m/30 mΩ range), 16 mA (300 mΩ range), 1.6 mA (3 Ω range) Open terminal Voltage: 5 V peak | ||
| Voltage measurement range | ± 6 V (max. display ±6.000 V, resolution: 1 mV) to ± 60 V (max. display ±60.00 V, resolution: 10 mV), 2 ranges, Accuracy: ±0.08 % rdg ±6 dgt | ||
| Temperature measurement accuracy | Measurement range: -10°C to 60°C (14°F to 140°F), Maximum display: 60.0°C (140.0°F), Resolution 0.1°C (0.1°F), Measurement accuracy*: ±1.0°C (±1.8°F) * When using the Clip Type Lead with Temperature Sensor 9460. * When using the Temperature Probe 9451, add ±0.5°C (±0.9°F) (cable length: 1.5 m [59.1"]). * When using the Temperature Probe 9451S, add ±0.5°C (±0.9°F) (cable length: 0.1 m [3.94"]). BT3554-50 standalone accuracy with simulated input: ±0.5°C (±0.9°F) | ||
| Absolute max. input voltage | 60 V DC max. (No AC input) | ||
| Measurement time | 100 ms | ||
| Response time | Approx. 1.6 sec. | ||
| Comparator | Compares measured values with set threshold values to make judgments and reports them to the user. Judgment notification method: Results are displayed as shown below (segment) and beeping tones sound When the Voltage value (high): Resistance value (low)= PASS, Resistance value (medium)= WARNING, Resistance value (high)= FAIL When the Voltage value (low): Resistance value (low)= WARNING, Resistance value (medium)= WARNING, Resistance value (high)= FAIL If the judgment result is WARNING or FAIL, the audio tone is accompanied by a red backlight. User-selectable voltage judgment method: ABS (absolute value judgment), POL (polarity judgment ) Savable settings: 200 tables | ||
| Memory functionality | Operation: Save, load, and delete measurement data, Save and delete profile information, Number of data sets: 6000, Memory architecture: 500 data sets per unit (12 units) Saved data: Saved measurement data is linked to profile information. 1. Measurement data: Data can be saved, loaded, and deleted by operating the instrument. -1. Date and time -2. Resistance value, voltage value, and temperature -3. Comparator threshold value and judgment result 2. Profile information: Profile information can be saved, loaded, and deleted using a supported application (GENNECT Cross or GENNECT One). -1. Profile numbers: 1 to 100 (Data (2), (3), and (4) below are saved for each profile number) -2. Location: User-defined comment such as location of UPS -3. Device information: User-defined comment such as UPS management number -4. Battery number: 1 to 500 (start number, end number) | ||
| Measurement Navigator | Operation: Announces the next battery number to be measured via a screen display and audio guidance. Audio output is generated by a connected mobile device when using the Z3210 and a supported application (GENNECT Cross). Preparations: Profile information that's been registered with a supported application (GENNECT Cross or GENNECT One) must be transferred to the instrument. | ||
| Communication interface | USB Bluetooth® wireless communications (when Z3210 installed) | ||
| Other functions | Temperature measurement (-10.0 to 60.0 °C), Zero-adjustment, Hold, Auto-hold, Auto-memory, Auto-power-save, Clock | ||
| Power supply | LR6 (AA) Alkaline dry battery ×8 Continuous operating time: About 8.3 hr. (without Z3210 installed), About 8.2 hr. (with Z3210 installed and wireless communications active) | ||
| Dimensions and mass | 199 mm (7.83 in)W × 132 mm (5.20 in)H × 60.6 mm (2.39 in)D (with protector), 960 g (33.9 oz) (including batteries and protector) | ||
| Accessories | Carrying Case C1014 ×1, Protector Z5041 ×1, Fuse Set Z5050 ×1, 0 Adj Board ×1, Neck strap ×1, USB cable ×1, Application software CD (GENNECT One) ×1, AA alkaline battery (LR6) ×8, User Manual ×1, Magnetic Strap Z5020 ×1, Wireless Adapter Z3210 ×1 | ||
| With Pin Type Lead 9465-10 | With Pin Type Lead L2020 | ||
ACCESSORIES
About probe length
A: From split area to probe
B: Probe
L: Total length
9465-90
- To replace the tip on the 9465-10, L2020, (one piece)
PIN TYPE LEAD 9465-10
- A: 45 mm (1.77 in) red, 105 mm (4.13 in) black 515 mm (20.28 in) Max., B: 176 mm (6.93 in), L: 1883 mm (6.18 ft), 60 V DC
PIN TYPE LEAD L2020
- A: 70 mm (2.76 in) (Red), 150 mm (5.91 in) (Black, up to 630 mm (24.8 in)), B: 164 mm (6.46 in), L: 1941 mm (76.42 in) (Red), 60 V DC
TIP PIN 9772-90
- To replace the tip on the Pin type lead 9772, L2100/L2110, (one piece)
PIN TYPE LEAD 9772
- A: 45 mm (1.77 in) red, 105 mm (4.13 in) black 515 mm (20.28 in) Max., B: 173 mm (6.81 in), L: 1880 mm (6.17 ft), 60 V DC
CLIP TYPE LEAD WITH TEMPERATURE SENSOR 9460
- For the 3554, 3540, A:300 mm (11.81 in), B:106 mm (4.17 in), L:2268 mm (7.44 ft)
LARGE CLIP TYPE LEAD 9467
- A: 300 mm (11.81 in.), B: 116 mm (4.57 in.), L: 1360 mm (53.54 in.), tip φ 29 mm (1.14 in.), 50 V DC
REMOTE CONTROL SWITCH 9466
- Can hold the values while measuring them, for the BT3554 (use with the L2020), 9772, 9465-10
About probe length
A: From split area to probe
B: Probe
L: Total length
9465-90
- To replace the tip on the 9465-10, L2020, (one piece)
PIN TYPE LEAD 9465-10
- A: 45 mm (1.77 in) red, 105 mm (4.13 in) black 515 mm (20.28 in) Max., B: 176 mm (6.93 in), L: 1883 mm (6.18 ft), 60 V DC
PIN TYPE LEAD L2020
- A: 70 mm (2.76 in) (Red), 150 mm (5.91 in) (Black, up to 630 mm (24.8 in)), B: 164 mm (6.46 in), L: 1941 mm (76.42 in) (Red), 60 V DC
TIP PIN 9772-90
- To replace the tip on the Pin type lead 9772, L2100/L2110, (one piece)
PIN TYPE LEAD 9772
- A: 45 mm (1.77 in) red, 105 mm (4.13 in) black 515 mm (20.28 in) Max., B: 173 mm (6.81 in), L: 1880 mm (6.17 ft), 60 V DC
CLIP TYPE LEAD WITH TEMPERATURE SENSOR 9460
- For the 3554, 3540, A:300 mm (11.81 in), B:106 mm (4.17 in), L:2268 mm (7.44 ft)
LARGE CLIP TYPE LEAD 9467
- A: 300 mm (11.81 in.), B: 116 mm (4.57 in.), L: 1360 mm (53.54 in.), tip φ 29 mm (1.14 in.), 50 V DC
REMOTE CONTROL SWITCH 9466
- Can hold the values while measuring them, for the BT3554 (use with the L2020), 9772, 9465-10
DOWNLOADS
Catalog
- BATTERY TESTER BT3554-50
Manual
- BATTERY TESTER BT3554-50,BT3554-51,BT3554-52
Declaration of Conformity
- BATTERY TESTER BT3554-50
Catalog
- BATTERY TESTER BT3554-50
Manual
- BATTERY TESTER BT3554-50,BT3554-51,BT3554-52
Declaration of Conformity
- BATTERY TESTER BT3554-50