Digital Multimeter DT4282

(0) No Reviews yet
$574.00
SKU: DT4282
Ships in approximately 15 days if not in stock.

This item is IN STOCK

The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket types. The DT4282 is our top-of-the-line high-precision 60,000 count digital multimeter with direct 10A input and all of the functions and features required for advanced testing in laboratories and R&D.  

Key Features
-60,000 count, 5-digit display, high-resolution measurements 
- .025DC V basic accuracy, wide 20 Hz to 100 kHz AC V frequency characteristics 
- Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms) 
- Includes multiple measurement functions such as DC,ACV, temperature, capacitance, and frequency  
- Includes terminal shutter mechanism for accident prevention (prevents erroneous test lead insertion) 
- USB communications function supports PC measurements (optional) 
- Broad -15 (5 degrees Fahrenheit) to 55 degrees Celsius (131 degrees Fahrenheit) operating temperature range direct and current clamp input terminals 

Product Warranty Period: 3 years

Included Accessories:
Test Lead L9207-10 ×1, Instruction Manual ×1, LR6 Alkaline Battery ×4
DC Voltage range60.000 mV to 1000.0 V, 6 ranges, Basic accuracy: ±0.025 % rdg. ±2 dgt.
AC Voltage* range60.000 mV to 1000.0 V, 6 ranges, Frequency characteristics: 20 Hz - 100 kHz
Basic accuracy 45 - 65 Hz : ±0.2 % rdg. ±25 dgt. (True RMS, crest factor 3)
DC + AC Voltage* range6.0000 V to 1000.0 V, 4 ranges, Frequency characteristics: 20 Hz - 100 kHz
Basic accuracy 45 - 65 Hz : ±0.3 % rdg. ±30 dgt. (True RMS, crest factor 3)
Resistance range60.000 Ω to 600.0 MΩ, 8 ranges, (Conductance: 600.00 nS, DT4282 only)
Basic accuracy: ±0.03 % rdg. ±2 dgt.
DC Current range600.00 μA to 10.000 A, 6 ranges, Basic accuracy: ±0.05 % rdg. ±5 dgt.
AC Current* range600.00 μA to 10.000 A, 6 ranges,
Basic accuracy 45 - 65 Hz : ±0.6 % rdg. ±5 dgt. (True RMS, crest factor 3)
Frequency characteristics: 20 Hz - 20 kHz (at 600 μA to 600 mA range)
AC Current* range (use with Clamp on probes)N/A
PeakDC V measurement: Signal width 4 msec or more (single), 1 msec or more (repeated)
AC V, DC/AC A measurement:
Signal width 1 msec or more (single), 250 μsec or more (repeated)
Capacitance range1.000 nF to 100.0 mF, 9 ranges, Basic accuracy: ±1.0 % rdg. ±5 dgt.
Continuity CheckContinuity threshold: 20/50/100/500 Ω, Response time: 10 ms or more
Diode testOpen terminal voltage: 4.5 V or less, Testing current 1.2 mA or less, Threshold of forward voltage: 0.15 V to 3 V, seven stages
Frequency rangeAC V, DC+AC V, AC A measurement, at pulse width 1 μs or more (50 % duty ratio)
99.999 Hz (0.5 Hz or more) to 500.00 kHz, 5 ranges, ±0.005 % rdg. ±3 dgt.
dB conversionStandard impedance setting (dBm), 4 Ω to 1200 Ω, 20 stages
Display dB conversion value of AC voltage (dBV)
Temperature (thermocouples)K: -40.0 °C to 800.0 °C (-40.0 °F to 1472.0 °F)
Add accuracy of the Thermocouple probe to main unit accuracy: ±0.5 % rdg. ±3 °C
Other functionsFilter function (Remove harmonic noise, use only at 600 VAC, 1000 VAC ranges), Display value hold, Auto hold, Max/Min value display, Sampling select, Relative display, Measurement memory (400 data), Auto-power save, USB communication (option), 4-20 mA % conversion
DisplayMain and Sub displays: 5-digits LCD, max. 60000 digits
Display refresh rates5 times/s (Capacitance measurement: 0.05 to 2 times/s, depending on measured value, Temperature: 1 time/s )
Power supplyLR6 (AA) alkaline batteries ×4, Continuous use: 100 hours
Dimensions and mass93 mm (3.66 in) W × 197 mm (7.76 in) H× 53 mm (2.09 in) D, 650 g (22.9 oz) (with test leads holder and batteries)
Included AccessoriesTest Lead L9207-10 ×1, Instruction Manual ×1, LR6 Alkaline Battery ×4
ACCESSORIES



EXTENSION CABLE SET L4931
Expands the length of the cable with banana plug, 1.5 m (4.92 ft) length



ALLIGATOR CLIP SET L4935
Attaches to the tip of the banana plug cable, CAT IV 600V, CAT III 1000V



BUS BAR CLIP SET L4936
Attaches to the tip of the banana plug cable, CAT III 600V



MAGNETIC ADAPTER SET L4937
Attaches to the tip of the banana plug cable, CAT III 1000V

TEST PIN SET L4932
Attaches to the tip of the banana plug cable, CAT IV 600V, CAT III 1000V



SMALL ALLIGATOR CLIP SET L4934
Attaches to the tip of the L4932, L9207-10/DT4911, L9206, CAT III 300V, CAT II 600V



TEST PIN SET L4938
Attaches to the tip of the banana plug cable, CAT III 600V



BREAKER PIN SET L4939
Attaches to the tip of the banana plug cable, CAT III 600V



GRABBER CLIP 9243
Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length, CAT III 1000 V
CARRYING CASE C0202



COMMUNICATION PACKAGE (USB) DT4900-01
- For DT4280s/4250s, compatible to Windows 8.1/ 8/ 7/ Vista



MAGNETIC STRAP Z5020
Extra strength



THERMOCOUPLES(K) DT4910
K type, tip exposed, 0.3 mm (0.01 in) diameter, 80 cm (2.62 ft) length, -40 to 260 °C (-40 to 500 °F), tolerance ±2.5 °C



CONTACT PIN SET L4933
Attaches to the tip of the Test Lead L9207-10/DT4911, L9206, 70V DC/ 33V AC



TEST LEAD L9207-10
90 cm (2.95 ft) length



CONNECTION CABLE SET L4930
1.2 m (3.94 ft) length



GRABBER CLIP 9243
Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length, CAT III 1000 V



EXTENSION CABLE SET L4931
Expands the length of the cable with banana plug, 1.5 m (4.92 ft) length

Ratings & Reviews

No reviews available

Be the first to Write a Review